Surface, Subsurface and Tribological Properties of Ti6Al4V Alloy Shot Peened under Different Parameters
出版年份 2020 全文链接
标题
Surface, Subsurface and Tribological Properties of Ti6Al4V Alloy Shot Peened under Different Parameters
作者
关键词
-
出版物
Materials
Volume 13, Issue 19, Pages 4363
出版商
MDPI AG
发表日期
2020-09-30
DOI
10.3390/ma13194363
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Tribological Behavior of Titanium Alloy Treated by Nitriding and Surface Texturing Composite Technology
- (2019) Jiajie Kang et al. Materials
- Effects of nanofeatures induced by severe shot peening (SSP) on mechanical, corrosion and cytocompatibility properties of magnesium alloy AZ31
- (2018) Sara Bagherifard et al. Acta Biomaterialia
- An evaluation on SP surface property by means of combined FEM-DEM shot dynamics simulation
- (2018) Jiabin Zhang et al. ADVANCES IN ENGINEERING SOFTWARE
- EBSD-assisted fractography of sub-surface fatigue crack initiation mechanism in the ultrasonic-shot-peened βeta-type titanium alloy
- (2018) Y. Uematsu et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Effect of shot-peening on the fretting wear and crack initiation behavior of Ti-6Al-4V dovetail joint specimens
- (2018) Qi Yang et al. INTERNATIONAL JOURNAL OF FATIGUE
- Surface characterization and fatigue evaluation in GH4169 superalloy : Comparing results after finish turning; shot peening and surface polishing treatments
- (2018) Daoxia Wu et al. INTERNATIONAL JOURNAL OF FATIGUE
- Effect of high energy shot-peening on the microstructure and mechanical properties of Al5052/Ti6Al4V lap joints
- (2018) Haodong Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Shot peening optimization with complex decision-making tool: Multi criteria decision-making
- (2018) Okan Unal et al. MEASUREMENT
- Effects of conventional, severe, over, and re-shot peening processes on the fatigue behavior of mild carbon steel
- (2018) Erfan Maleki et al. SURFACE & COATINGS TECHNOLOGY
- Effect of different surface asperities and surface hardness induced by shot-peening on the fretting wear behavior of Ti-6Al-4V
- (2018) Qi Yang et al. SURFACE & COATINGS TECHNOLOGY
- Improvement in tribological behavior of commercial pure titanium (CP-Ti) by surface mechanical attrition treatment (SMAT)
- (2018) Saeed Alikhani Chamgordani et al. TRIBOLOGY INTERNATIONAL
- A nanocrystalline-amorphous mixed layer obtained by ultrasonic shot peening on pure titanium at room temperature
- (2018) Lihua Zhu et al. ULTRASONICS SONOCHEMISTRY
- Surface Texture-Based Surface Treatments on Ti6Al4V Titanium Alloys for Tribological and Biological Applications: A Mini Review
- (2018) Naiming Lin et al. Materials
- Effects of Shot-Peening and Stress Ratio on the Fatigue Crack Propagation of AL 7475-T7351 Specimens
- (2018) Natália Ferreira et al. Applied Sciences-Basel
- Structure response characteristics and surface nanocrystallization mechanism of alpha phase in Ti-6Al-4V subjected to high energy shot peening
- (2018) Y.G. Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Tailoring the surface characteristics of electrophoretically deposited chitosan-based bioactive glass composite coatings on titanium implants via grit blasting
- (2018) Egemen Avcu et al. PROGRESS IN ORGANIC COATINGS
- Effect of tribological parameters on sliding wear and friction coefficient which relates to preload loss in tapered roller bearing
- (2018) Ayush Jain et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Effect of laser shock peening on wear behaviors of TC11 alloy at elevated temperature
- (2018) Z.P. Tong et al. OPTICS AND LASER TECHNOLOGY
- Effect of laser peening on friction and wear behavior of medical Ti6Al4V alloy
- (2018) Jianzhong Zhou et al. OPTICS AND LASER TECHNOLOGY
- Effects of shot peening pre-treatment and plasma nitriding parameters on the structural, mechanical and tribological properties of AISI 4140 low-alloy steel
- (2018) H. Kovacı et al. SURFACE & COATINGS TECHNOLOGY
- Additive manufacturing of Ti6Al4V alloy: A review
- (2018) Shunyu Liu et al. MATERIALS & DESIGN
- Simultaneous Shot-Peening of hard and soft particles for friction reduction in reciprocal sliding
- (2018) Ori Stav et al. TRIBOLOGY INTERNATIONAL
- Effect of pre-treatment with fine particle peening on surface properties and wear resistance of gas blow induction heating nitrided titanium alloy
- (2018) Shogo Takesue et al. SURFACE & COATINGS TECHNOLOGY
- Influence of different shot peening treatments on surface state and fatigue behaviour of Al 6063 alloy
- (2017) Juan González et al. ENGINEERING FRACTURE MECHANICS
- Effect of ultrasonic shot peening on LCF behavior of the Ti–6Al–4V alloy
- (2017) Sanjeev Kumar et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Tribological properties of dimple-textured titanium alloys under dry sliding contact
- (2017) Ze Wu et al. SURFACE & COATINGS TECHNOLOGY
- EFFECT OF PRE- AND POST-WELD SHOT PEENING ON THE MECHANICAL & TRIBOLOGICAL PROPERTIES OF TIG WELDED ALUMINUM 6061-T6 ALLOY
- (2017) Anas M. Atieh et al. TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING
- The influences of ECAP on the dry sliding wear behaviour of AA7075 aluminium alloy
- (2017) Egemen Avcu TRIBOLOGY INTERNATIONAL
- Effect of Surface Polishing Treatment on the Fatigue Performance of Shot-Peened Ti–6Al–4V Alloy
- (2017) Z. G. Liu et al. Acta Metallurgica Sinica-English Letters
- Effect of micro shot peening on the mechanical properties and corrosion behavior of two microstructure Ti–6Al–4V alloy
- (2016) Aymen A. Ahmed et al. APPLIED SURFACE SCIENCE
- Effects of the different frequencies and loads of ultrasonic surface rolling on surface mechanical properties and fretting wear resistance of HIP Ti–6Al–4V alloy
- (2016) G. Li et al. APPLIED SURFACE SCIENCE
- Influence of plasma molybdenizing and shot-peening on fretting damage behavior of titanium alloy
- (2016) Chang-bin Tang et al. APPLIED SURFACE SCIENCE
- Effect of laser peening and shot peening on fatigue striations during FCGR study of Ti6Al4V
- (2016) B.K. Pant et al. INTERNATIONAL JOURNAL OF FATIGUE
- Nanocrystallization mechanism of beta phase in Ti-6Al-4V subjected to severe plastic deformation
- (2016) Yingang Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Multiscale roughness analysis of engineering surfaces: A comparison of methods for the investigation of functional correlations
- (2016) Gaëtan Le Goïc et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Effects of shot peening pressure, media type and double shot peening on the microstructure, mechanical and tribological properties of low-alloy steel
- (2016) Pham Quang Trung et al. Surface Topography-Metrology and Properties
- Optimization of Surface Properties of Shot Peened TI6AL4V Alloy
- (2015) Y. Yıldıran et al. ACTA PHYSICA POLONICA A
- Study of the effects produced by shot peening on the surface of quenched and tempered steels: roughness, residual stresses and work hardening
- (2015) V. Llaneza et al. APPLIED SURFACE SCIENCE
- Effect of severe air-blast shot peening on the wear characteristics of CP titanium
- (2015) Abdullah Cahit Karaoglanli Materiali in Tehnologije
- The effect of shot peening parameters and hydroxyapatite coating on surface properties and corrosion behavior of medical grade AISI 316L stainless steel
- (2015) Aymen A. Ahmed et al. SURFACE & COATINGS TECHNOLOGY
- Relation between roughness and processing conditions of AISI 316L stainless steel treated by ultrasonic shot peening
- (2015) J. Marteau et al. TRIBOLOGY INTERNATIONAL
- Surface roughness effect on the friction and wear of bulk metallic glasses
- (2015) M.L. Rahaman et al. WEAR
- Enhancing surface layer properties of an aircraft aluminum alloy by shot peening using response surface methodology
- (2015) Yong-Seog Nam et al. MATERIALS & DESIGN
- Influences of Particle Impingement Angle and Velocity on Surface Roughness, Erosion Rate, and 3D Surface Morphology of Solid Particle Eroded Ti6Al4V Alloy
- (2014) E. Avcu et al. ACTA PHYSICA POLONICA A
- Influence of severe shot peening on wear behaviour of an aluminium alloy
- (2014) M. Palacios et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Influence of shot peening on corrosion properties of biocompatible magnesium alloy AZ31 coated by dicalcium phosphate dihydrate (DCPD)
- (2014) Mansour Mhaede et al. Materials Science & Engineering C-Materials for Biological Applications
- Predicting shot peening coverage using multiphase computational fluid dynamics simulations
- (2014) Van Bo Nguyen et al. POWDER TECHNOLOGY
- Investigating the effects of bulk and surface severe plastic deformation on the fatigue, corrosion behaviour and corrosion fatigue of AA5083
- (2014) Mustafa Abdulstaar et al. SURFACE & COATINGS TECHNOLOGY
- Effect of wet shot peening on Ti-6Al-4V alloy treated by ceramic beads
- (2014) Guo-qing CHEN et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- The influence of shot peening on the surface properties of (TiB+TiC)/Ti–6Al–4V
- (2013) Lechun Xie et al. APPLIED SURFACE SCIENCE
- Friction and wear behavior of shot peened surfaces of 36CrNiMo4 and 36NiCrMo16 alloyed steels under dry and lubricated contact conditions
- (2013) Slobodan Mitrovic et al. APPLIED SURFACE SCIENCE
- Application of different fatigue strength criteria to shot peened notched components. Part 1: Fracture Mechanics based approaches
- (2013) Sara Bagherifard et al. APPLIED SURFACE SCIENCE
- Multiaxial fatigue resistance of shot peened high-strength aluminum alloys
- (2013) M. Benedetti et al. INTERNATIONAL JOURNAL OF FATIGUE
- Co-blasting of titanium surfaces with an abrasive and hydroxyapatite to produce bioactive coatings: Substrate and coating characterisation
- (2013) Conor F Dunne et al. JOURNAL OF BIOMATERIALS APPLICATIONS
- Role of residual stresses induced by double peening on fatigue durability of automotive leaf springs
- (2013) Bruno Geoffroy Scuracchio et al. MATERIALS & DESIGN
- Effect of heat treatment on the tribological properties of Al–Cu–Mg/nanoSiC composites
- (2013) Rıdvan Yamanoğlu et al. MATERIALS & DESIGN
- Effect of severe shot peening on ultra-high-cycle fatigue of a low-alloy steel
- (2013) Libor Trško et al. MATERIALS & DESIGN
- Effect of shotpeening on sliding wear and tensile behavior of titanium implant alloys
- (2013) B.K.C. Ganesh et al. MATERIALS & DESIGN
- Influence of hardness of substrates on properties of surface layer formed by fine particle bombarding
- (2013) Tatsuro Morita et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of SPD surface layer on plasma nitriding of Ti–6Al–4V alloy
- (2013) K. Farokhzadeh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on erosive wear behaviour of Ti6Al4V alloy
- (2013) S Fidan et al. MATERIALS SCIENCE AND TECHNOLOGY
- Effects of combined diffusion treatments and cold working on the sliding friction and wear behavior of Ti–6Al–4V
- (2013) Dinesh G. Bansal et al. WEAR
- Numerical and experimental analysis of surface roughness generated by shot peening
- (2012) Sara Bagherifard et al. APPLIED SURFACE SCIENCE
- Experimental results in fretting fatigue with shot and laser peened Al 7075-T651 specimens
- (2012) J. Vázquez et al. INTERNATIONAL JOURNAL OF FATIGUE
- Surface hardening of aluminum alloy by shot peening treatment with Zn based ball
- (2012) Kyun Taek Cho et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fretting wear and friction reduction of CP titanium and Ti–6Al–4V alloy by ultrasonic nanocrystalline surface modification
- (2012) Auezhan Amanov et al. SURFACE & COATINGS TECHNOLOGY
- Sliding wear behaviour of surface mechanical attrition treated AISI 304 stainless steel
- (2012) Y. Sun TRIBOLOGY INTERNATIONAL
- Tribological behaviour of shot peened Cu–Ni austempered ductile iron
- (2012) A. Zammit et al. WEAR
- Enhanced fatigue performance of porous coated Ti6Al4V biomedical alloy
- (2011) I. Apachitei et al. APPLIED SURFACE SCIENCE
- Correlation between standard roughness parameters skewness and kurtosis and tribological behaviour of contact surfaces
- (2011) Marko Sedlaček et al. TRIBOLOGY INTERNATIONAL
- Tribological Behaviour of Pure Ti with a Nanocrystalline Surface Layer Under Different Loads
- (2011) M. Wen et al. TRIBOLOGY LETTERS
- Surface engineering to improve the durability and lubricity of Ti–6Al–4V alloy
- (2011) D.G. Bansal et al. WEAR
- Micro-dimpled surface by ultrasonic nanocrystal surface modification and its tribological effects
- (2011) A. Amanov et al. WEAR
- Influence of Surface Treatments on Fatigue Strength of Ti6Al4V Alloy
- (2010) Kyo Takahashi et al. MATERIALS TRANSACTIONS
- Influence of hardness and roughness on the tribological performance of TiC/a-C nanocomposite coatings
- (2010) K.P. Shaha et al. SURFACE & COATINGS TECHNOLOGY
- Mechanical and wear properties of ultrafine-grained pure Ti produced by multi-pass equal-channel angular extrusion
- (2009) G. Purcek et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effects of laser peening and shot peening on high cycle fatigue in 7050-T7451 aluminum alloy
- (2009) Harold Luong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Shot Peening on Surface Characteristics and Fatigue Properties of T5-Treated ZK60 Alloy
- (2009) Wencai Liu et al. MATERIALS TRANSACTIONS
- Effects of Shot-Peening on Fretting Fatigue Crack Growth Behavior in Ti-6Al-4V
- (2009) S. Mall et al. STRAIN
- Diffusion Bonding of Surface Self-nanocrystallized Ti–4Al–2V and 0Cr18Ni9Ti by Means of High Energy Shot Peening
- (2008) J. Han et al. ISIJ INTERNATIONAL
- Study on the tribological performance of ceramic coatings on titanium alloy surfaces obtained through microarc oxidation
- (2008) Chen Fei et al. PROGRESS IN ORGANIC COATINGS
- Review of shot peening processes to obtain nanocrystalline surfaces in metal alloys
- (2008) S. Bagheri et al. SURFACE ENGINEERING
- Effects of microshot peening on surface characteristics of high-speed tool steel
- (2007) Y. Harada et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Plasma nitriding behavior of Ti6Al4V orthopedic alloy
- (2007) F. Yildiz et al. SURFACE & COATINGS TECHNOLOGY
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now