Effect of Grain Refinement and Dispersion of Particles and Reinforcements on Mechanical Properties of Metals and Metal Matrix Composites through High-Ratio Differential Speed Rolling
出版年份 2020 全文链接
标题
Effect of Grain Refinement and Dispersion of Particles and Reinforcements on Mechanical Properties of Metals and Metal Matrix Composites through High-Ratio Differential Speed Rolling
作者
关键词
-
出版物
Materials
Volume 13, Issue 18, Pages 4159
出版商
MDPI AG
发表日期
2020-09-18
DOI
10.3390/ma13184159
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Formulation of corrosion rate of magnesium alloys using microstructural parameters
- (2020) Ahmad Bahmani et al. Journal of Magnesium and Alloys
- Controlling the microstructure and texture using multi-directional forging to develop a low corrosion rate Mg alloy
- (2020) ahmad bahmani et al. CORROSION
- Microstructure and tensile properties of magnesium nanocomposites fabricated using magnesium chips and carbon black
- (2020) T.J. Lee et al. Journal of Magnesium and Alloys
- Fabrication of a thin open-cell Ni foam sheet with a high specific strength and moderate porosity using severe plastic deformation via differential speed rolling
- (2019) H.T. Jeong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improved corrosion resistant and strength of a magnesium alloy using multi-directional forging (MDF)
- (2019) Ahmad Bahmani et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Improvement of corrosion resistance and mechanical properties of a magnesium alloy using screw rolling
- (2019) Ahmad Bahmani et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Successful transition from low-temperature superplasticity to high-strain-rate superplasticity with increasing temperature in an ultrafine-grained Mg–Y–Zn–Zr alloy
- (2019) T.J. Lee et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Hall-Petch relationship in Mg alloys: A review
- (2018) Huihui Yu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Microstructural Evolution and Electrochemical Properties of HRDSR AZ61-X (X = Ca, Ti) Alloys
- (2018) Min Gyu Kim et al. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
- Effect of Post-annealing and Strong Deformation Process on the Mechanical and Corrosion Properties of a Mg-Mn alloy for Biomedical Application
- (2018) Min Gyu Kim et al. JOURNAL OF THE KOREAN PHYSICAL SOCIETY
- Characterization of the microstructures and the shape memory properties of the Fe-Mn-Si-Cr-Ni-C shape memory alloy after severe plastic deformation by differential speed rolling and subsequent annealing
- (2018) Y.S. Kim et al. MATERIALS CHARACTERIZATION
- Mechanical properties and Hall-Petch relationship of the extruded Mg-Zn-Y alloys with different volume fractions of icosahedral phase
- (2018) T.Y. Kwak et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanical and microstructural investigation of Zn/Sn multilayered composites fabricated by accumulative roll bonding (ARB) process
- (2017) Amir Mashhadi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Characterization of high strength nickel thin sheets fabricated by differential speed rolling method
- (2017) Wojciech Polkowski et al. MATERIALS CHARACTERIZATION
- The effect of annealing on the formability of aluminum 1200 after accumulative roll bonding
- (2017) M.R. Morovvati et al. Journal of Manufacturing Processes
- Effect of multi-directional forging on the microstructure and mechanical properties of TiBw/TA15 composite with network architecture
- (2017) Rui Zhang et al. MATERIALS & DESIGN
- High Pressure Torsion Extrusion as a new severe plastic deformation process
- (2016) Yu. Ivanisenko et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment and deformation temperature on the mechanical properties of ECAP processed ZK60 magnesium alloy
- (2016) Yuchun Yuan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Development of biodegradable Mg–Ca alloy sheets with enhanced strength and corrosion properties through the refinement and uniform dispersion of the Mg2Ca phase by high-ratio differential speed rolling
- (2015) J.W. Seong et al. Acta Biomaterialia
- Gradient structure produced by three roll planetary milling: Numerical simulation and microstructural observations
- (2015) Ya Li Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Low temperature superplasticity of ultrafine grained Mg–9.25Zn–1.66Y alloy with an icosahedral quasicrystalline phase
- (2015) W.J. Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper
- (2015) A. Hohenwarter MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Refinement of the icosahedral quasicrystalline phase and the grain size of Mg–9.25Zn–1.66Y alloy by high-ratio differential speed rolling
- (2015) T.Y. Kwak et al. SCRIPTA MATERIALIA
- Influence of texture on Hall–Petch relationships in an Mg alloy
- (2014) Yi Wang et al. ACTA MATERIALIA
- Effect of microstructure on strength and ductility of high strength quasicrystal phase dispersed Mg–Zn–Y alloys
- (2014) Alok Singh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Ductility enhancement through texture control and strength restoration through subsequent age-hardening in Mg–Zn–Zr alloys
- (2014) Y.H. Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improving the mechanical properties of pure magnesium by three-roll planetary milling
- (2014) Mathilde Diez et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A combination of ball milling and high-ratio differential speed rolling for synthesizing carbon nanotube/copper composites
- (2013) S.J. Yoo et al. CARBON
- Multi-layer graphene/copper composites: Preparation using high-ratio differential speed rolling, microstructure and mechanical properties
- (2013) W.J. Kim et al. CARBON
- Enhanced corrosion resistance of ultrafine-grained AZ61 alloy containing very fine particles of Mg17Al12 phase
- (2013) H.S. Kim et al. CORROSION SCIENCE
- Enhanced mechanical properties of AZ31 magnesium alloy sheets processed by three-directional rolling
- (2013) Hua Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of different rolling routes on the microstructure evolution and properties of AZ31 magnesium alloy sheets
- (2013) Hua Zhang et al. MATERIALS & DESIGN
- Importance of diffusional creep in fine grained Mg–3Al–1Zn alloys
- (2013) T.J. Lee et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fabrication of ultrafine-grained Mg–3Al–1Zn magnesium alloy sheets using a continuous high-ratio differential speed rolling technique
- (2013) W.Y. Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolution and mechanical properties of ultrafine grained IF steel via multipass differential speed rolling
- (2013) Y G Ko et al. MATERIALS SCIENCE AND TECHNOLOGY
- The effect of the addition of multiwalled carbon nanotubes on the uniform distribution of TiC nanoparticles in aluminum nanocomposites
- (2013) W.J. Kim et al. SCRIPTA MATERIALIA
- Effect of differential speed rolling strain on microstructure and mechanical properties of nanostructured 5052 Al alloy
- (2012) Loorentz et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The microstructural evolution and superplastic behavior at low temperatures of Mg–5.00Zn–0.92Y–0.16Zr (wt.%) alloys after hot extrusion and ECAP process
- (2012) S.W. Xu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Ultrafine-grained Mg–Zn–Zr alloy with high strength and high-strain-rate superplasticity
- (2012) W.J. Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Dispersion of TiC particles in an in situ aluminum matrix composite by shear plastic flow during high-ratio differential speed rolling
- (2012) W.J. Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and texture evolution of copper processed by differential speed rolling with various speed asymmetry coefficient
- (2012) W. Polkowski et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Enhanced superplasticity and diffusional creep in ultrafine-grained Mg–6Al–1Zn alloy with high thermal stability
- (2012) W.J. Kim et al. SCRIPTA MATERIALIA
- Asymmetric cryorolling for fabrication of nanostructural aluminum sheets
- (2012) Hailiang YU et al. Scientific Reports
- Effect of speed-ratio on microstructure, and mechanical properties of Mg–3Al–1Zn alloy, in differential speed rolling
- (2011) W.J. Kim et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure evolution and mechanical properties of severely deformed Al alloy processed by differential speed rolling
- (2011) Loorentz et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Exceptionally high strength in Mg–3Al–1Zn alloy processed by high-ratio differential speed rolling
- (2011) W.J. Kim et al. SCRIPTA MATERIALIA
- Influence of grain size and texture on Hall–Petch relationship for a magnesium alloy
- (2011) W. Yuan et al. SCRIPTA MATERIALIA
- Grain character influences on corrosion of ECAPed pure magnesium
- (2010) N. Birbilis et al. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY
- Enhanced superplasticity of 1wt.%Ca-AZ80 Mg alloy with ultrafine grains
- (2010) W.J. Kim et al. MATERIALS LETTERS
- Homogeneous corrosion of high pressure torsion treated Mg–Zn–Ca alloy in simulated body fluid
- (2010) J.H. Gao et al. MATERIALS LETTERS
- Influence of ECAP routes on microstructure and mechanical properties of Mg–Zn–Ca alloy
- (2010) L.B. Tong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Synthesis of high-strain-rate superplastic magnesium alloy sheets using a high-ratio differential speed rolling technique
- (2010) W.J. Kim et al. SCRIPTA MATERIALIA
- Effect of the speed ratio on grain refinement and texture development in pure Ti during differential speed rolling
- (2010) W.J. Kim et al. SCRIPTA MATERIALIA
- A strategy for creating ultrafine-grained microstructure in magnesium alloy sheets
- (2009) W.J. Kim et al. MATERIALS LETTERS
- Synthesis of ultra high strength Al–Mg–Si alloy sheets by differential speed rolling
- (2009) W.J. Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical properties and microstructures of ultrafine-grained pure aluminum by asymmetric rolling
- (2009) Jianhua Jiang et al. SCRIPTA MATERIALIA
- Enhancement of stretch formability of Mg–3Al–1Zn alloy sheet using hot rolling at high temperatures up to 823K and subsequent warm rolling
- (2009) Xinsheng Huang et al. SCRIPTA MATERIALIA
- Enhanced impact toughness of magnesium alloy by grain refinement
- (2009) Jinsun Liao et al. SCRIPTA MATERIALIA
- Microstructure and mechanical properties of pure Ti processed by high-ratio differential speed rolling at room temperature
- (2009) W.J. Kim et al. SCRIPTA MATERIALIA
- Improvement of formability of Mg–Al–Zn alloy sheet at low temperatures using differential speed rolling
- (2008) Xinsheng Huang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Developing superplasticity in a magnesium AZ31 alloy by ECAP
- (2008) Roberto B. Figueiredo et al. JOURNAL OF MATERIALS SCIENCE
- The effects of asymmetrical cold rolling on kinetics, grain size and texture in IF steels
- (2008) Aurelie Wauthier et al. MATERIALS CHARACTERIZATION
- Mechanical properties and microstructure of ultra fine-grained copper prepared by a high-speed-ratio differential speed rolling
- (2008) W.J. Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improvement of strength of magnesium alloy processed by equal channel angular extrusion
- (2008) S.X. Ding et al. SCRIPTA MATERIALIA
- Textures and stretch formability of Mg–6Al–1Zn magnesium alloy sheets rolled at high temperatures up to 793K
- (2008) Xinsheng Huang et al. SCRIPTA MATERIALIA
- Effect of differential speed rolling on microstructure and mechanical properties of an AZ91 magnesium alloy
- (2007) W.J. Kim et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Analysis of thermo-mechanical process occurred in magnesium alloy AZ31 sheet during differential speed rolling
- (2007) Y.H. Ji et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of post-deformation on CP-Ti processed by equal channel angular pressing
- (2007) V.V. Stolyarov et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Change in Mechanical Properties and Microstructure of ARB Processed Ti during Annealing
- (2007) Daisuke Terada et al. MATERIALS TRANSACTIONS
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started