标题
Metal Matrix Composites Synthesized by Laser-Melting Deposition: A Review
作者
关键词
-
出版物
Materials
Volume 13, Issue 11, Pages 2593
出版商
MDPI AG
发表日期
2020-06-09
DOI
10.3390/ma13112593
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Effect of TiB2 content on microstructural features and hardness of TiB2/AA7075 composites manufactured by LMD
- (2020) Zhenglong Lei et al. Journal of Manufacturing Processes
- Prototype Orthopedic Bone Plates 3D Printed by Laser Melting Deposition
- (2019) Diana Chioibasu et al. Materials
- A G4 continuous B-spline transition algorithm for CNC machining with jerk-smooth feedrate scheduling along linear segments
- (2019) Yong Zhang et al. COMPUTER-AIDED DESIGN
- Titanium metal matrix composites: An overview
- (2019) Muhammad D. Hayat et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Effects of SiC content on phase evolution and corrosion behavior of SiC-reinforced 316L stainless steel matrix composites by laser melting deposition
- (2019) C.L. Wu et al. OPTICS AND LASER TECHNOLOGY
- Design, preparation, microstructure and properties of novel wear-resistant stainless steel-base composites using laser melting deposition
- (2019) X. Li et al. VACUUM
- Development of metal matrix composites by direct energy deposition of ‘satellited’ powders
- (2019) P.K. Farayibi et al. Journal of Manufacturing Processes
- Fabrication of Metal Matrix Composite by Laser Metal Deposition—A New Process Approach by Direct Dry Injection of Nanopowders
- (2019) Briac Lanfant et al. Materials
- Lithium-Doped Biological-Derived Hydroxyapatite Coatings Sustain In Vitro Differentiation of Human Primary Mesenchymal Stem Cells to Osteoblasts
- (2019) Paula E. Florian et al. Coatings
- Microstructural control of an Al–W aluminum matrix composite during direct laser metal deposition
- (2019) A. Ramakrishnan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Modeling and simulation of trajectory smoothing and feedrate scheduling for vibration-damping CNC machining
- (2019) Wei Fan et al. SIMULATION MODELLING PRACTICE AND THEORY
- Animal Origin Bioactive Hydroxyapatite Thin Films Synthesized by RF-Magnetron Sputtering on 3D Printed Cranial Implants
- (2019) Diana Chioibasu et al. Metals
- In-situ reaction of Ti-Si-C composite powder and formation mechanism of laser deposited Ti6Al4V/ (TiC+Ti3SiC2) system functionally graded material
- (2019) Neng Li et al. MATERIALS & DESIGN
- Ultrasonic vibration-assisted laser engineering net shaping of ZrO 2 -Al 2 O 3 bulk parts: Effects on crack suppression, microstructure, and mechanical properties
- (2018) Yingbin Hu et al. CERAMICS INTERNATIONAL
- Metal matrix composites with ternary intermetallic inclusions fabricated by laser direct energy deposition
- (2018) Igor Shishkovsky et al. COMPOSITE STRUCTURES
- Laser deposition-additive manufacturing of TiB-Ti composites with novel three-dimensional quasi-continuous network microstructure: Effects on strengthening and toughening
- (2018) Yingbin Hu et al. COMPOSITES PART B-ENGINEERING
- Ultrasonic Vibration-Assisted Laser Engineered Net Shaping of Inconel 718 Parts: Microstructural and Mechanical Characterization
- (2018) Fuda Ning et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Microstructure and tensile properties of TiC p /Ti6Al4V titanium matrix composites manufactured by laser melting deposition
- (2018) Jiandong Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Laser engineered net shaping of quasi-continuous network microstructural TiB reinforced titanium matrix bulk composites: Microstructure and wear performance
- (2018) Yingbin Hu et al. OPTICS AND LASER TECHNOLOGY
- A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites
- (2018) Yingbin Hu et al. CERAMICS INTERNATIONAL
- Study of the Influence of Shielding Gases on Laser Metal Deposition of Inconel 718 Superalloy
- (2018) Jose Ruiz et al. Materials
- Effect of Process Parameters on Deposition Properties of Functionally Graded STS 316/Fe Manufactured by Laser Direct Metal Deposition
- (2018) Sangwoo Nam et al. Metals
- Microstructure and mechanical properties of TiB2-reinforced 7075 aluminum matrix composites fabricated by laser melting deposition
- (2018) Bi Jiang et al. CERAMICS INTERNATIONAL
- Monitoring of laser metal deposition height by means of coaxial laser triangulation
- (2018) Simone Donadello et al. OPTICS AND LASERS IN ENGINEERING
- Laser deposition-additive manufacturing of in situ TiB reinforced titanium matrix composites: TiB growth and part performance
- (2017) Yingbin Hu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fiber size effects on mechanical behaviours of SiC fibres-reinforced Ti 3 AlC 2 matrix composites
- (2017) Shuqi Guo JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- In-situ ultrafine three-dimensional quasi-continuous network microstructural TiB reinforced titanium matrix composites fabrication using laser engineered net shaping
- (2017) Yingbin Hu et al. MATERIALS LETTERS
- Effect of Si content on microstructure and thermo-physical properties of the joint of Si p /6063Al composite by laser melting deposition
- (2017) Zhenglong Lei et al. OPTICS AND LASER TECHNOLOGY
- Additive Manufacturing of H11 with Wire-Based Laser Metal Deposition
- (2017) Stella Holzbach Oliari et al. Soldagem & Inspecao
- Production and mechanical properties of nano SiC particle reinforced Ti–6Al–4V matrix composite
- (2017) G. SIVAKUMAR et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Lasers in additive manufacturing: A review
- (2017) Hyub Lee et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Microstructural study of MMC layers produced by combining wire and coaxial WC powder feeding in laser direct metal deposition
- (2016) Fuquan Li et al. OPTICS AND LASER TECHNOLOGY
- Alloying effect of titanium on WCp/Al composite fabricated by coincident wire-powder laser deposition
- (2016) Fuquan Li et al. MATERIALS & DESIGN
- Tribological, electrochemical and in vitro biocompatibility properties of SiC reinforced composite coatings
- (2016) Mitun Das et al. MATERIALS & DESIGN
- Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing
- (2015) T. Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts: Tailored microstructures and enhanced performance
- (2015) Chen Hong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?
- (2015) L.J. Huang et al. PROGRESS IN MATERIALS SCIENCE
- Effect of second-phase doping on laser deposited Al2O3 ceramics
- (2015) Fangyong Niu et al. RAPID PROTOTYPING JOURNAL
- Nanosized microstructure of Al2O3–ZrO2 (Y2O3) eutectics fabricated by laser engineered net shaping
- (2015) Fangyong Niu et al. SCRIPTA MATERIALIA
- Review of selective laser melting: Materials and applications
- (2015) C. Y. Yap et al. Applied Physics Reviews
- Selective laser melting of in situ titanium–titanium boride composites: Processing, microstructure and mechanical properties
- (2014) Hooyar Attar et al. ACTA MATERIALIA
- Carbon Nanotube Reinforced Titanium Metal Matrix Composites Prepared by Powder Metallurgy—A Review
- (2014) Khurram S. Munir et al. CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES
- Research status of laser cladding on titanium and its alloys: A review
- (2014) Fei Weng et al. MATERIALS & DESIGN
- Effect of cooling rate and laser process parameters on additive manufactured Fe–Ti–C metal matrix composites microstructure and carbide morphology
- (2014) Ali Emamian et al. Journal of Manufacturing Processes
- Predictive modeling of surface roughness in high speed machining of AISI 4340 steel using yttria stabilized zirconia toughened alumina turning insert
- (2013) Nilrudra Mandal et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Additive layer manufacture of Inconel 625 metal matrix composites, reinforcement material evaluation
- (2013) D.E. Cooper et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and wear behavior of laser cladding VC–Cr7C3 ceramic coating on steel substrate
- (2013) Qianlin Wu et al. MATERIALS & DESIGN
- Scanning velocity influence on microstructure, microhardness and wear resistance performance of laser deposited Ti6Al4V/TiC composite
- (2013) Rasheedat M. Mahamood et al. MATERIALS & DESIGN
- Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures
- (2013) Chen Hong et al. OPTICS AND LASER TECHNOLOGY
- Fabrication of Biomedical Implants using Laser Engineered Net Shaping (LENS™)
- (2013) Mitun Das et al. Transactions of the Indian Ceramic Society
- In situ nitridation of titanium–molybdenum alloys during laser deposition
- (2012) Tushar Borkar et al. JOURNAL OF MATERIALS SCIENCE
- Laser Deposition of Ti-6Al-4V Wire with WC Powder for Functionally Graded Components
- (2012) P. K. Farayibi et al. MATERIALS AND MANUFACTURING PROCESSES
- Rapid prototyping of porcelain products by layer‐wise slurry deposition (LSD) and direct laser sintering
- (2012) Xiaoyong Tian et al. RAPID PROTOTYPING JOURNAL
- Laser processing of in situ synthesized TiB–TiN-reinforced Ti6Al4V alloy coatings
- (2012) Mitun Das et al. SCRIPTA MATERIALIA
- Laser processed TiN reinforced Ti6Al4V composite coatings
- (2011) Vamsi Krishna Balla et al. Journal of the Mechanical Behavior of Biomedical Materials
- Application of direct laser melting to restore damaged steel dies
- (2011) Jeong Hwan Jang et al. METALS AND MATERIALS INTERNATIONAL
- Investigating wettability alteration due to asphaltene precipitation: Imprints in surface multifractal characteristics
- (2010) J. Sayyad Amin et al. APPLIED SURFACE SCIENCE
- A review on stereolithography and its applications in biomedical engineering
- (2010) Ferry P.W. Melchels et al. BIOMATERIALS
- High temperature mechanical properties of a laser melting deposited TiC/TA15 titanium matrix composite
- (2010) D. Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructural evolution in friction stir welding of nanostructured ODS alloys
- (2010) C.-L. Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructural evolution in laser deposited nickel–titanium–carbon in situ metal matrix composites
- (2010) S. Gopagoni et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Experimental Study on Fabrication of Al-Al2O3/Grp Metal Matrix Composites
- (2010) A. Manna et al. JOURNAL OF COMPOSITE MATERIALS
- Wet Lay-Up Manufactured FRPs for Concrete and Masonry Repair: Influence of Water on the Properties of Composites and on Their Epoxy Components
- (2010) Margherita Stefania Sciolti et al. JOURNAL OF COMPOSITES FOR CONSTRUCTION
- Laser cladding in-situ carbide particle reinforced Fe-based composite coatings with rare earth oxide addition
- (2010) Chaofeng WU et al. JOURNAL OF RARE EARTHS
- Creep rupture behaviors of a laser melting deposited TiC/TA15 in situ titanium matrix composite
- (2010) D. Liu et al. MATERIALS & DESIGN
- Microstructure and mechanical properties of rapid directionally solidified Ni-base superalloy Rene′41 by laser melting deposition manufacturing
- (2010) J. Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The Influence of Ni-Coated TiC on Laser-Deposited IN625 Metal Matrix Composites
- (2010) Baolong Zheng et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Adaptive toolpath deposition method for laser net shape manufacturing and repair of turbine compressor airfoils
- (2009) Huan Qi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure and tensile properties of laser melting deposited TiC/TA15 titanium matrix composites
- (2009) D. Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Direct Inkjet Printing of Dental Prostheses Made of Zirconia
- (2009) J. Ebert et al. JOURNAL OF DENTAL RESEARCH
- Processing of Aluminum-Graphite Particulate Metal Matrix Composites by Advanced Shear Technology
- (2009) N. Barekar et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- The influence of working distance on laser deposited WC–Co
- (2009) Yuhong Xiong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Parametric appraisal of mechanical property of fused deposition modelling processed parts
- (2009) Anoop Kumar Sood et al. MATERIALS & DESIGN
- Design and fabrication of CoCrMo alloy based novel structures for load bearing implants using laser engineered net shaping
- (2009) Félix A. España et al. Materials Science & Engineering C-Materials for Biological Applications
- Processing of Ultrafine-Size Particulate Metal Matrix Composites by Advanced Shear Technology
- (2009) N.S. Barekar et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Direct inkjet printing of silver electrodes on organic semiconductors for thin-film transistors with top contact geometry
- (2008) Yoshiaki Noguchi et al. APPLIED PHYSICS LETTERS
- Ceramics as biomaterials for dental restoration
- (2008) Wolfram Höland et al. Expert Review of Medical Devices
- Microstructure and wear resistance of WC–Co by three consolidation processing techniques
- (2008) J.A. Picas et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Characterization of laser powder deposited Ti–TiC composites and functional gradient materials
- (2008) Yongzhong Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Zirconia toughened alumina ceramic foams for potential bone graft applications: fabrication, bioactivation, and cellular responses
- (2008) X. He et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Effect of TiC content on Ni/TiC composites by direct laser fabrication
- (2008) Yuxin Li et al. MATERIALS & DESIGN
- Microstructure and Properties of Laser-Deposited Ti6Al4V Metal Matrix Composites Using Ni-Coated Powder
- (2008) B. Zheng et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Laser cladding and laser assisted direct manufacturing
- (2008) Igor Smurov SURFACE & COATINGS TECHNOLOGY
- Hybrid effect of TiBw and TiCp on tensile properties of in situ titanium matrix composites
- (2007) L. Geng et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Growth mechanism of in situ synthesized TiBw in titanium matrix composites prepared by common casting technique
- (2007) W.J. Lu et al. MATERIALS CHARACTERIZATION
- Fabrication of WC–Co cermets by laser engineered net shaping
- (2007) Yuhong Xiong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure characteristics of Ni-based WC composite coatings by laser induction hybrid rapid cladding
- (2007) Shengfeng Zhou et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now