3D Printed Thermoelectric Polyurethane/Multiwalled Carbon Nanotube Nanocomposites: A Novel Approach towards the Fabrication of Flexible and Stretchable Organic Thermoelectrics

Is LiI a Potential Dopant Candidate to Enhance the Thermoelectric Performance in Sb-Free GeTe Systems? A Prelusive Study

(2020) Bhuvanesh Srinivasan et al.   Energies

Mechanical and Electrical Properties Investigation of 3D-Printed Acrylonitrile–Butadiene–Styrene Graphene and Carbon Nanocomposites

(2020) N. Vidakis et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Three-Dimensional Printed Polylactic Acid (PLA) Surgical Retractors with Sonochemically Immobilized Silver Nanoparticles: The Next Generation of Low-Cost Antimicrobial Surgery Equipment

(2020) Lazaros Tzounis et al.   Nanomaterials

Three-Dimensional (3D) Conductive Network of CNT-Modified Short Jute Fiber-Reinforced Natural Rubber: Hierarchical CNT-Enabled Thermoelectric and Electrically Conductive Composite Interfaces

(2020) Lazaros Tzounis et al.   Materials

P- and n-type thermoelectric cement composites with CVD grown p- and n-doped carbon nanotubes: Demonstration of a structural thermoelectric generator

(2019) Lazaros Tzounis et al.   ENERGY AND BUILDINGS

3D Printed Sensors for Biomedical Applications: A Review

(2019) Tao Han et al.   SENSORS

Highly conductive ultra-sensitive SWCNT-coated glass fiber reinforcements for laminate composites structural health monitoring

(2019) Lazaros Tzounis et al.   COMPOSITES PART B-ENGINEERING

Fully 3D-Printed, Monolithic, Mini Magnetic Actuators for Low-Cost, Compact Systems

(2019) Anthony P. Taylor et al.   JOURNAL OF MICROELECTROMECHANICAL SYSTEMS

A carbon fiber thermoelectric generator integrated as a lamina within an 8-ply laminate epoxy composite: Efficient thermal energy harvesting by advanced structural materials

(2019) George Karalis et al.   APPLIED ENERGY

All-aromatic SWCNT-Polyetherimide nanocomposites for thermal energy harvesting applications

(2018) Lazaros Tzounis et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Ultraflexible Glassy Semiconductor Fibers for Thermal Sensing and Positioning

(2018) Ting Zhang et al.   ACS Applied Materials & Interfaces

Polypropylene-based melt mixed composites with singlewalled carbon nanotubes for thermoelectric applications: Switching from p-type to n-type by the addition of polyethylene glycol

(2017) Jinji Luo et al.   POLYMER

Effect of MWCNTs and their modification on crystallization and thermal degradation of poly(butylene naphthalate)

(2017) Zoi Terzopoulou et al.   THERMOCHIMICA ACTA

Hydrophilic PAN based carbon nanofibres with improved graphitic structure and enhanced mechanical performance using ethylenediamine functionalized graphene

(2017) Zhenyu Li et al.   RSC Advances

Development of the Improving Process for the 3D Printed Structure

(2017) Kensuke Takagishi et al.   Scientific Reports

3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nanocomposites

(2017) Josef F. Christ et al.   MATERIALS & DESIGN

3D-Printing of Meso-structurally Ordered Carbon Fiber/Polymer Composites with Unprecedented Orthotropic Physical Properties

(2017) James P. Lewicki et al.   Scientific Reports

Conducting polymer/carbon particle thermoelectric composites: Emerging green energy materials

(2016) Caiyan Gao et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Fully gravure printed organic photovoltaic modules: A straightforward process with a high potential for large scale production

(2016) Christos Kapnopoulos et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

The interphase microstructure and electrical properties of glass fibers covalently and non-covalently bonded with multiwall carbon nanotubes

(2014) Lazaros Tzounis et al.   CARBON

Influence of the MWCNT surface functionalization on the thermoelectric properties of melt-mixed polycarbonate composites

(2014) Marco Liebscher et al.   COMPOSITES SCIENCE AND TECHNOLOGY

High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers

(2014) Lazaros Tzounis et al.   MATERIALS & DESIGN

Influence of a cyclic butylene terephthalate oligomer on the processability and thermoelectric properties of polycarbonate/MWCNT nanocomposites

(2014) Lazaros Tzounis et al.   POLYMER

β-nucleated propylene–ethylene random copolymer filled with multi-walled carbon nanotubes: Mechanical, thermal and rheological properties

(2014) Dimitrios G. Papageorgiou et al.   POLYMER

Increasing the thermoelectric power generated by composite films using chemically functionalized single-walled carbon nanotubes

(2013) Mingxing Piao et al.   CARBON

Raman spectroscopy as a versatile tool for studying the properties of graphene

(2013) Andrea C. Ferrari et al.   Nature Nanotechnology

Thermoelectric properties of single walled carbon nanotube networks in polycarbonate matrix

(2013) Mingxing Piao et al.   PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS

Enhanced Performance of Dispenser Printed MA n-type Bi2Te3 Composite Thermoelectric Generators

(2012) Deepa Madan et al.   ACS Applied Materials & Interfaces

Thermoelectric behavior of organic thin film nanocomposites

(2012) Gregory P. Moriarty et al.   JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS

Flexible Nanocrystal-Coated Glass Fibers for High-Performance Thermoelectric Energy Harvesting

(2012) Daxin Liang et al.   NANO LETTERS

A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors

(2012) Simon J. Leigh et al.   PLoS One

Selective localization of multi-wall carbon nanotubes in homopolymer blends and a diblock copolymer. Rheological orientation studies of the final nanocomposites

(2012) Florian Wode et al.   POLYMER

A review and analysis of electrical percolation in carbon nanotube polymer composites

(2008) Wolfgang Bauhofer et al.   COMPOSITES SCIENCE AND TECHNOLOGY