4.3 Article

Comparison of fluorine sources on the electrochemical property of Li1.2Ni0.2Mn0.6O2 cathode materials

期刊

FUNCTIONAL MATERIALS LETTERS
卷 13, 期 5, 页码 -

出版社

WORLD SCIENTIFIC PUBL CO PTE LTD
DOI: 10.1142/S1793604720500277

关键词

Cathode materials; Li-rich nickel manganese oxide materials; F-doped; fluorine sources

资金

  1. National Natural Science Foundation of China [51774150, 51974137]

向作者/读者索取更多资源

Li-rich nickel manganese oxide materials are promising cathode materials for their high theoretical capacity and cobalt-free property. However, the poor cycle and rate performance still hamper their commercial application. In this study, fluorine-doped Li1.2Ni0.2Mn0.6O2 (LNMO) materials have been prepared successfully with different fluorine sources. XRD results verified that the (003) and (104) peaks of F-doped samples slightly shift to the lower diffraction angle than bare LNMO, and the large lithium slab distance of F-doped samples is beneficial for the transport and diffusion of Li+. The sample with PVDF as fluorine sources exhibits the best electrochemical performance than other F-doped LNMO samples. Specifically, this sample exhibits a high discharge capacity of 213.5 mAh g(-1) at 0.2 C (2.0-4.8 V), corresponding to a capacity retention of 88.7% after 100 cycles. The excellent electrochemical performance is due to the substitution of fluorine for oxygen sites with the host lattice, which can significantly enhance the Li(+ )migration and stabilize the layer structure of LNMO during the cycle process. These results demonstrated that PVDF was the best fluorine source to facilitate the electrochemical property of LNMO.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.3
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

Article Materials Science, Ceramics

Carbon-coated cation-disordered rocksalt-type transition metal oxide composites for high energy Li-ion batteries

Zhenlu Yu, Xingyu Qu, Aichun Dou, Yu Zhou, Mingru Su, Yunjian Liu

Summary: Li-excess cation-disordered rocksalt oxides with both cationic and anionic redox capabilities have raised challenges in large polarization and poor rate performance due to anionic evolution and poor electronic conductivity. A facile strategy of carbon coating using moderate mass ratio of carbon precursor and calcination temperature has been shown to significantly improve the electrochemical properties of Ni-based cation-disordered oxides, leading to enhanced specific capacity and rate performance. The carbon coating process increases tetrahedron height for easy Li diffusion, reduces polarization, protects cathode, retards SEI layer thickening, and enhances electronic conductivity.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

High-rate capability of carbon-coated micron-sized hexagonal TT-Nb2O5 composites for lithium-ion battery

Xueli Chen, Ke Liu, Qianwan Qin, Zhenlu Yu, Meiqing Li, Xingyu Qu, Yu Zhou, Aichun Dou, Mingru Su, Yunjian Liu

Summary: In this study, carbon-coated TT-Nb2O5 materials were designed and synthesized through solid state method, showing high specific capacity and satisfactory rate properties.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Multidisciplinary

High-rate capability of columbite CuNb2O6 anode materials for lithium-ion batteries

Meiqing Li, Anbang Su, Qianwan Qin, Yuan Qin, Aichun Dou, Yu Zhou, Mingru Su, Yunjian Liu

Summary: Columbite CuNb2O6 anode materials prepared through solid-state reaction at high temperature exhibit exceptional battery performance, including remarkable rate capability and outstanding cyclic stability, suggesting their potential application in lithium-ion batteries.

MATERIALS LETTERS (2021)

Article Engineering, Environmental

Self-sacrificial-reaction guided formation of hierarchical electronic/ionic conductive shell enabling high-performance nano-silicon anode

Yu Zhou, Shihao Feng, Pengfei Zhu, Huajun Guo, Guochun Yan, Xinhai Li, Mingru Su, Yunjian Liu, Zhixing Wang, Jiexi Wang

Summary: In this study, a hierarchical electronic/ionic conducting shell was cleverly constructed on nano-Si particles to enhance their stability and conductivity, effectively addressing the issue of surface oxidation. The optimized material exhibited outstanding cycle stability and rate capability, retaining 70.2% of its capacity after 200 cycles. This work provides a promising strategy for promoting the practical applications of Si nanoparticles as anode materials for lithium ion batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

A facile fabrication of nanometer tetragonal rod-like SnO2 as anode for lithium ion batteries

Mingru Su, Tian Gao, Guangyan Zhu, Yepeng Chai, Yu Zhou, Jinlin Li, Kai Fu, Aichun Dou, Yunjian Liu

Summary: A facile solid phase method using SnSe as a precursor was proposed for the preparation of SnO2, resulting in nearly pure SnO2 material. The as-prepared SnO2 exhibited promising electrochemical performance as an anode material for Li-ion batteries, with high initial charge capacity and good rate performance.

IONICS (2021)

Article Chemistry, Physical

Improving the Structure Stability of LiNi0.8Co0.15Al0.05O2 by Double Modification of Tantalum Surface Coating and Doping

Xiaoyun Zhang, Panpan Zhang, Tianyi Zeng, Zhenlu Yu, Xingyu Qu, Xiaoqi Peng, Yu Zhou, Xiaoguang Duan, Aichun Dou, Mingru Su, Yunjian Liu

Summary: The study applied a one-step high-temperature solid-phase sintering method to form a Ta2O5 protective layer on the surface of high-nickel materials, significantly enhancing the structural stability and improving the cycling performance of NCA at high rates.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Physical

An integrated surface coating strategy to enhance the electrochemical performance of nickel-rich layered cathodes

Xingyu Qu, He Huang, Tao Wan, Long Hu, Zhenlu Yu, Yunjian Liu, Aichun Dou, Yu Zhou, Mingru Su, Xiaoqi Peng, Hong-Hui Wu, Tom Wu, Dewei Chu

Summary: An integrated surface coating/doping strategy has been developed to improve the structural stability and electrochemical performance of high-nickel layered oxides, leading to enhanced cycling stability and capacity retention of batteries. The strategy involves diffusion of titanium ions from a thin coating layer, formation of a protective layer on the material surface, and Ti4+ doping to enhance lithium ion diffusion and reduce side reactions, ultimately benefiting the cycling stability of the cathode.

NANO ENERGY (2022)

Review Chemistry, Physical

Revisiting recent and traditional strategies for surface protection of Zn metal anode

Ahmad Naveed, Amjad Ali, Tahir Rasheed, Xuri Wang, Pan Ye, Xiaowei Li, Yu Zhou, Su Mingru, Yunjian Liu

Summary: Aqueous rechargeable Zn batteries have significant potential for energy storage applications, but face challenges with Zn anode that require surface engineering for stabilization. Surface engineering of Zn anode through artificial protective layers/coatings is an emerging and promising research direction.

JOURNAL OF POWER SOURCES (2022)

Article Materials Science, Multidisciplinary

Metallurgy of aluminum-inspired formation of aluminosilicate-coated nanosilicon for lithium-ion battery anode

Yu Zhou, Peng-Hu Niu, Zhong-Hua Li, Pan-Pan Zhang, Ming-Ru Su, Ai-Chun Dou, Xiao-Wei Li, Yun-Jian Liu

Summary: The modification of Si anode with an aluminosilicate matrix coating layer improves the stability and performance of silicon, attributing to the synergistic composite coating layer which inhibits interfacial side chemical reactions and buffers volume change of Si.

RARE METALS (2022)

Article Electrochemistry

Storage degradation mechanism of layered Ni-rich oxide cathode material LiNi0.8Co0.1Mn0.1O2

Mingru Su, Yichang Chen, Hongjia Liu, Jinlin Li, Kai Fu, Yu Zhou, Aichun Dou, Yunjian Liu

Summary: This study investigates the decay mechanism of structure and electrochemical properties of LiNi0.8Co0.1Mn0.1O2 materials during storage. It is found that the instability of Ni3+ leads to the appearance of NiO rock salt phase on the material's surface, accompanied by the formation of reactive oxygen species. The material reacts with H2O and CO2 in the air to form surface residual lithium compounds, hindering the diffusion kinetics of Li+ and resulting in capacity loss.

ELECTROCHIMICA ACTA (2022)

Article Materials Science, Ceramics

Synthesis and performance of micron-sized hexagonal W0.025Nb1.97O5 for high-rate lithium-ion batteries

Xueli Chen, Xianhua Liu, Shuang Hao, Jingqi Wang, Naveed Ahmad, Panpan Zhang, Pei Cui, Mingru Su, Aichun Dou, Yu Zhou, Yunjian Liu

Summary: Niobium-based oxides have potential as anode materials for LIBs, but suffer from poor electronic conductivity. This study demonstrates that doping with W6+ can improve the electrical conductivity and prepare high-performance hexagonal orthorhombic W0.025Nb1.97O5 material.

CERAMICS INTERNATIONAL (2022)

Article Chemistry, Physical

Synergetic design of a coralline-like Si/Ni/C anode material with microstructure and gradient interface for lithium-ion batteries

Penghu Niu, Yu Zhou, Zhonghua Li, Yuyang Xiao, Mingru Su, Shuai Zhou, Xiaochuan Hou, Yunjian Liu

Summary: A coralline-like Si/Ni/C anode material was proposed by utilizing a metal-organic framework as the metal and carbon source. The in situ formed interlayer of NiSi2 at the interface of the carbon skeleton and Si nanoparticles improved the compatibility and gradient interface between them. The composite demonstrated excellent reversible capacity and rate capability due to the synergistic effects of stable structural integrity and good interface stability.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Article Engineering, Environmental

Structure and defect strategy towards high-performance copper niobate as anode for Li-ion batteries

Mingru Su, Meiqing Li, Kuidong He, Tao Wan, Xueli Chen, Yu Zhou, Panpan Zhang, Aichun Dou, Haolan Xu, Chunsheng Lu, Renheng Wang, Dewei Chu, Yunjian Liu

Summary: Copper niobate nanoparticles have been demonstrated to be a promising anode material for lithium-ion batteries, exhibiting high capacity, ultra-fast charging, and safety characteristics. The nanoparticles possess a unique crystal structure and morphology that provide structural stability and enhanced Li+ transfer kinetics. These nanoparticles show significant pseudocapacitive behavior and excellent electrochemical performances, with high capacity retention and impressive rate performance even at high charging rates.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Chemistry, Physical

Conversion of residual lithium into fast ionic conductor coating to achieve one-step double modification strategy in LiNi0.8Co0.15Al0.05O2

Hanwei Zhang, Xiaoyun Zhang, Tianyi Zeng, Aichun Dou, Panpan Zhang, Mingru Su, Yu Zhou, Yunjian Liu

Summary: By applying a LiTaO3 coating and Ta5+ doping strategy, the irreversible phase transition and interfacial side reactions of Ni-rich ternary cathode materials during long-term cycling are effectively restrained, leading to enhanced rate capability and cycling life.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Article Chemistry, Physical

NiSb/nitrogen-doped carbon derived from Ni-based framework as advanced anode for lithium-ion batteries

Mingru Su, Jinlin Li, Kuidong He, Kai Fu, Penghu Nui, Yichang Chen, Yu Zhou, Aichun Dou, Xiaochuan Hou, Yunjian Liu

Summary: This study addresses the issue of volume expansion in antimony anodes during lithium-ion battery operation by synthesizing a NiSb alloy embedded in nitrogen-doped carbon. The composite structure effectively mitigates volume expansion and improves cycling stability and high-rate performance.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

暂无数据