标题
3D printing for enhanced drug delivery: current state-of-the-art and challenges
作者
关键词
-
出版物
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Volume -, Issue -, Pages 1-17
出版商
Informa UK Limited
发表日期
2020-07-25
DOI
10.1080/03639045.2020.1801714
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Low-temperature solvent-based 3D printing of PLGA: a parametric printability study
- (2020) Emad Naseri et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Design of a patient-specific mandible reconstruction implant with dental prosthesis for metal 3D printing using integrated weighted topology optimization and finite element analysis
- (2020) Chia-Hsuan Li et al. Journal of the Mechanical Behavior of Biomedical Materials
- 3D printed PCL scaffold reinforced with continuous biodegradable fiber yarn: A study on mechanical and cell viability properties
- (2020) Seyyed Kaveh Hedayati et al. POLYMER TESTING
- Development of a Biodegradable Subcutaneous Implant for Prolonged Drug Delivery Using 3D Printing
- (2020) Sarah Stewart et al. Pharmaceutics
- Semi-solid extrusion 3D printing ODFs: an individual drug delivery system for small scale pharmacy
- (2020) Ting-Ting Yan et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Fabrication and Characterization of Poly Lactic Acid Scaffolds by Fused Deposition Modeling for Bone Tissue Engineering
- (2020) Mohammad Khodaei et al. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
- Novel titanium-apatite hybrid scaffolds with spongy bone-like micro architecture intended for spinal application: In vitro and in vivo study
- (2020) Maria Daniela Vlad et al. Materials Science & Engineering C-Materials for Biological Applications
- A 3D Printed Self-Sustainable Cell-Encapsulation Drug Delivery Device for Periocular Transplant-Based Treatment of Retinal Degenerative Diseases
- (2020) Hideto Kojima et al. Micromachines
- 3D printing for oral drug delivery: a new tool to customize drug delivery
- (2020) Manisha Pandey et al. Drug Delivery and Translational Research
- 3D printing of calcium phosphate scaffolds with controlled release of antibacterial functions for jaw bone repair
- (2020) Huan Sun et al. MATERIALS & DESIGN
- Personalised 3D Printed Medicines: Optimising Material Properties for Successful Passive Diffusion Loading of Filaments for Fused Deposition Modelling of Solid Dosage Forms
- (2020) Jose R. Cerda et al. Pharmaceutics
- 3D Printing of Pharmaceuticals and Drug Delivery Devices
- (2020) Essyrose Mathew et al. Pharmaceutics
- Novel 3D printed device with integrated macroscale magnetic field triggerable anti-cancer drug delivery system
- (2020) Kejing Shi et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Fabrication of Mucoadhesive Buccal Films for Local Administration of Ketoprofen and Lidocaine Hydrochloride by Combining Fused Deposition Modeling and Inkjet Printing
- (2020) Georgios K. Eleftheriadis et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Surface morphology and drug loading characterization of 3D-printed methacrylate-based polymer facilitated by supercritical carbon dioxide
- (2020) Truc T. Ngo et al. JOURNAL OF SUPERCRITICAL FLUIDS
- 3D Printed Pellets (Miniprintlets): A Novel, Multi-Drug, Controlled Release Platform Technology
- (2019) Atheer Awad et al. Pharmaceutics
- Rheological and Dielectric Behavior of 3D-Printable Chitosan/Graphene Oxide Hydrogels
- (2019) Jasim Ahmed et al. ACS Biomaterials-Science & Engineering
- A New Method for Securing Dermal Substitutes and Skin Grafts to Difficult Portions of the Face Using a Custom 3D-Printed Facemask
- (2019) Hernán A Aguilar et al. Journal of Burn Care & Research
- 3D Printing of a Multi-Layered Polypill Containing Six Drugs Using a Novel Stereolithographic Method
- (2019) Pamela Robles-Martinez et al. Pharmaceutics
- pH-Sensitive Chitosan–Heparin Nanoparticles for Effective Delivery of Genetic Drugs into Epithelial Cells
- (2019) Iuliia Pilipenko et al. Pharmaceutics
- Fabrication and finite element analysis of stereolithographic 3D printed microneedles for transdermal delivery of model dyes across human skin in vitro
- (2019) Iakovos Xenikakis et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Unidirectional drug release from 3D printed mucoadhesive buccal films using FDM technology: In vitro and ex vivo evaluation
- (2019) Georgios K. Eleftheriadis et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- 3D Printed Polyvinyl Alcohol Tablets with Multiple Release Profiles
- (2019) Xiaowen Xu et al. Scientific Reports
- A mini-review on drug delivery through wafer technology: Formulation and manufacturing of buccal and oral lyophilizates
- (2019) Juliana Souza Ribeiro Costa et al. Journal of Advanced Research
- Development of a hot-melt extrusion (HME) process to produce drug loaded Affinisol™ 15LV filaments for fused filament fabrication (FFF) 3D printing
- (2019) Elke Prasad et al. Additive Manufacturing
- Biocompatible 3D Printed Microneedles for Transdermal, Intradermal, and Percutaneous Applications
- (2019) Khalil Moussi et al. ADVANCED ENGINEERING MATERIALS
- Fabrication of an osmotic 3D printed solid dosage form for controlled release of active pharmaceutical ingredients
- (2019) Christos I. Gioumouxouzis et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Fabrication of floating capsule-in- 3D-printed devices as gastro-retentive delivery systems of amoxicillin
- (2019) Thapakorn Charoenying et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Development and Optimisation of Novel Polymeric Compositions for Sustained Release Theophylline Caplets (PrintCap) via FDM 3D Printing
- (2019) Deck Khong Tan et al. Polymers
- 3D printed biodegradable implants as an individualized drug delivery system for local chemotherapy of osteosarcoma
- (2019) Yonghui Wang et al. MATERIALS & DESIGN
- 3D-Printed Solid Dispersion Drug Products
- (2019) Suet Li Chew et al. Pharmaceutics
- The Effect of Inkjet Printing over Polymeric Films as Potential Buccal Biologics Delivery Systems
- (2018) Miguel Montenegro-Nicolini et al. AAPS PHARMSCITECH
- Controlled Release of 5-Fluorouracil from Alginate Beads Encapsulated in 3D Printed pH-Responsive Solid Dosage Forms
- (2018) Christos I. Gioumouxouzis et al. AAPS PHARMSCITECH
- Influence of Geometry on the Drug Release Profiles of Stereolithographic (SLA) 3D-Printed Tablets
- (2018) Pamela Robles Martinez et al. AAPS PHARMSCITECH
- Oral disintegrating patient-tailored tablets of warfarin sodium produced by 3D printing
- (2018) Pan Tian et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Reshaping drug development using 3D printing
- (2018) Atheer Awad et al. DRUG DISCOVERY TODAY
- Tablet fragmentation without a disintegrant: A novel design approach for accelerating disintegration and drug release from 3D printed cellulosic tablets
- (2018) Basel Arafat et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- 3D printed microneedles for insulin skin delivery
- (2018) Cristiane Patricia Pissinato Pere et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fabricating 3D printed orally disintegrating printlets using selective laser sintering
- (2018) Fabrizio Fina et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed medicines: A new branch of digital healthcare
- (2018) Atheer Awad et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of vaginal rings with personalized shapes for controlled release of progesterone
- (2018) Junhui Fu et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Formulation strategies for solid oral dosage form using 3D printing technology: A mini-review
- (2018) Pinak Khatri et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Formulation of 3D Printed Tablet for Rapid Drug Release by Fused Deposition Modeling: Screening Polymers for Drug Release, Drug-Polymer Miscibility and Printability
- (2018) Nayan G. Solanki et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Biodegradable 3D printed polymer microneedles for transdermal drug delivery
- (2018) Michael A. Luzuriaga et al. LAB ON A CHIP
- 3D Printing Pharmaceuticals: Drug Development to Frontline Care
- (2018) Sarah J. Trenfield et al. TRENDS IN PHARMACOLOGICAL SCIENCES
- 3D Printing, Ink Casting and Micromachined Lamination (3D PICLμM): A Makerspace Approach to the Fabrication of Biological Microdevices
- (2018) Avra Kundu et al. Micromachines
- Additive Manufacturing with 3D Printing: Progress from Bench to Bedside
- (2018) Ziyaur Rahman et al. AAPS Journal
- Printing T3 and T4 oral drug combinations as a novel strategy for hypothyroidism
- (2018) Mustafa Alomari et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Corrigendum: Estimation of clinical trial success rates and related parameters
- (2018) Chi Heem Wong et al. BIOSTATISTICS
- Advanced Pharmaceutical Applications of Hot-Melt Extrusion Coupled with Fused Deposition Modelling (FDM) 3D Printing for Personalised Drug Delivery
- (2018) Deck Tan et al. Pharmaceutics
- ‘Temporary Plasticiser’: A novel solution to fabricate 3D printed patient-centred cardiovascular ‘Polypill’ architectures
- (2018) Beatriz C. Pereira et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Assessment of different polymers and drug loads for fused deposition modeling of drug loaded implants
- (2017) Wiebke Kempin et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Effects of 3D-Printed Polycaprolactone/β-Tricalcium Phosphate Membranes on Guided Bone Regeneration
- (2017) Jin-Hyung Shim et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Patient acceptability of 3D printed medicines
- (2017) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Selective laser sintering (SLS) 3D printing of medicines
- (2017) Fabrizio Fina et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed tablets loaded with polymeric nanocapsules: An innovative approach to produce customized drug delivery systems
- (2017) R.C.R. Beck et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Preparation and investigation of controlled-release glipizide novel oral device with three-dimensional printing
- (2017) Qijun Li et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed orodispersible films with Aripiprazole
- (2017) Witold Jamróz et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Cutaneous vaccination with coated microneedles prevents development of airway allergy
- (2017) Akhilesh Kumar Shakya et al. JOURNAL OF CONTROLLED RELEASE
- 3D printed multi-compartment capsular devices for two-pulse oral drug delivery
- (2017) A. Maroni et al. JOURNAL OF CONTROLLED RELEASE
- 3D inkjet printing of tablets exploiting bespoke complex geometries for controlled and tuneable drug release
- (2017) Mary Kyobula et al. JOURNAL OF CONTROLLED RELEASE
- Three-Dimensional Printing of Medicinal Products and the Challenge of Personalized Therapy
- (2017) Lucia Zema et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Temperature and pH responsive 3D printed scaffolds
- (2017) Sujan Dutta et al. Journal of Materials Chemistry B
- Buccal Dosage Forms: General Considerations for Pediatric Patients
- (2016) Soledad Montero-Padilla et al. AAPS PHARMSCITECH
- Three-Dimensional Printing of pH-Responsive and Functional Polymers on an Affordable Desktop Printer
- (2016) Milena Nadgorny et al. ACS Applied Materials & Interfaces
- Ethylene vinyl acetate (EVA) as a new drug carrier for 3D printed medical drug delivery devices
- (2016) Natalja Genina et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- An investigation into the use of polymer blends to improve the printability of and regulate drug release from pharmaceutical solid dispersions prepared via fused deposition modeling (FDM) 3D printing
- (2016) Muqdad Alhijjaj et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Acceptability of oral solid medicines in older adults with and without dysphagia: A nested pilot validation questionnaire based observational study
- (2016) Fang Liu et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling
- (2016) Alice Melocchi et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
- (2016) Jie Wang et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Transcutaneous immunization via rapidly dissolvable microneedles protects against hand-foot-and-mouth disease caused by enterovirus 71
- (2016) Zhuangzhi Zhu et al. JOURNAL OF CONTROLLED RELEASE
- Rabies vaccination in dogs using a dissolving microneedle patch
- (2016) Jaya M. Arya et al. JOURNAL OF CONTROLLED RELEASE
- 3D scanning and 3D printing as innovative technologies for fabricating personalized topical drug delivery systems
- (2016) Alvaro Goyanes et al. JOURNAL OF CONTROLLED RELEASE
- Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing
- (2015) Justyna Skowyra et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- 3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
- (2015) Alvaro Goyanes et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- A flexible-dose dispenser for immediate and extended release 3D printed tablets
- (2015) Katarzyna Pietrzak et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- The Fuster-CNIC-Ferrer Cardiovascular Polypill: a polypill for secondary cardiovascular prevention
- (2015) Juan Tamargo et al. INTERNATIONAL JOURNAL OF CARDIOLOGY
- Antibiotic and chemotherapeutic enhanced three-dimensional printer filaments and constructs for biomedical applications
- (2015) David Mills et al. International Journal of Nanomedicine
- Personalised dosing: Printing a dose of one’s own medicine
- (2015) Mustafa Alomari et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing
- (2015) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of tablets containing multiple drugs with defined release profiles
- (2015) Shaban A. Khaled et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Effect of geometry on drug release from 3D printed tablets
- (2015) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
- (2015) Shaban A. Khaled et al. JOURNAL OF CONTROLLED RELEASE
- 3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs
- (2015) Alice Melocchi et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Fabrication of scalable and structured tissue engineering scaffolds using water dissolvable sacrificial 3D printed moulds
- (2015) Soumyaranjan Mohanty et al. Materials Science & Engineering C-Materials for Biological Applications
- Experimental study of PLLA/INH slow release implant fabricated by three dimensional printing technique and drug release characteristics in vitro
- (2014) Gui Wu et al. Biomedical Engineering Online
- Fused-filament 3D printing (3DP) for fabrication of tablets
- (2014) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3-dimensional (3D) fabricated polymer based drug delivery systems
- (2014) Simon E. Moulton et al. JOURNAL OF CONTROLLED RELEASE
- Benefits, issues, and recommendations for personalized medicine in oncology in Canada
- (2013) C. Butts et al. Current Oncology
- In vitro characterisation of terbutaline sulphate particles prepared by thermal ink-jet spray freeze drying
- (2013) Garima Sharma et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Desktop 3D printing of controlled release pharmaceutical bilayer tablets
- (2013) Shaban A. Khaled et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Vaccine delivery with microneedle skin patches in nonhuman primates
- (2013) Peter C DeMuth et al. NATURE BIOTECHNOLOGY
- The effects of laser energy density and particle size in the selective laser sintering of polycaprolactone/progesterone specimens: morphology and drug release
- (2012) Gean Vitor Salmoria et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Performance and characteristics evaluation of a sodium hyaluronate-based microneedle patch for a transcutaneous drug delivery system
- (2012) Yasuhiro Hiraishi et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Dissolving microneedles for transdermal drug administration prepared by stepwise controlled drawing of maltose
- (2011) Kwang Lee et al. BIOMATERIALS
- Thermal ink-jet spray freeze-drying for preparation of excipient-free salbutamol sulphate for inhalation
- (2011) Wunlapa Mueannoom et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Personalizing medicine with clinical pharmacogenetics
- (2011) Stuart A. Scott GENETICS IN MEDICINE
- Preparation of Personalized-dose Salbutamol Sulphate Oral Films with Thermal Ink-Jet Printing
- (2011) Asma B. M. Buanz et al. PHARMACEUTICAL RESEARCH
- Preservation of Bioavailability of Ingredients and Lack of Drug-Drug Interactions in a Novel Five-Ingredient Polypill (Polycap™)
- (2010) Anil Patel et al. American Journal of Cardiovascular Drugs
- Microneedle-based drug delivery systems: Microfabrication, drug delivery, and safety
- (2010) Ryan F. Donnelly et al. DRUG DELIVERY
- Aqueous solubility of crystalline and amorphous drugs: Challenges in measurement
- (2010) Sharad B. Murdande et al. PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY
- Microneedles in Clinical Practice–An Exploratory Study Into the Opinions of Healthcare Professionals and the Public
- (2010) James C. Birchall et al. PHARMACEUTICAL RESEARCH
- Microneedle Arrays Allow Lower Microbial Penetration Than Hypodermic Needles In Vitro
- (2009) Ryan F. Donnelly et al. PHARMACEUTICAL RESEARCH
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search