标题
Advances in Ultrasonic Welding of Thermoplastic Composites: A Review
作者
关键词
-
出版物
Materials
Volume 13, Issue 6, Pages 1284
出版商
MDPI AG
发表日期
2020-03-13
DOI
10.3390/ma13061284
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Investigation on Ultrasonic Welding Attributes of Novel Carbon/Elium® Composites
- (2020) Somen K Bhudolia et al. Materials
- Fatigue response of ultrasonically welded carbon/Elium® thermoplastic composites
- (2020) Somen K Bhudolia et al. MATERIALS LETTERS
- Improvement of the adhesion of continuously manufactured multi-material joints by application of thermoplastic adhesive film
- (2019) Tobias Reincke et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Resistance welding of thermoplastic composites with a nanocomposite heating element
- (2019) David Brassard et al. COMPOSITES PART B-ENGINEERING
- Experimental and Microscopic Investigation on Mechanical Performance of Textile Spread-tow Thin Ply Composites
- (2019) Somen Kumar Bhudolia et al. FIBERS AND POLYMERS
- Innovative acrylic thermoplastic composites versus conventional composites: Improving the impact performances
- (2019) G. Kinvi-Dossou et al. COMPOSITE STRUCTURES
- Weld Quality Prediction in Ultrasonic Welding of Carbon Fiber Composite Based on an Ultrasonic Wave Transmission Model
- (2019) Yang Li et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Investigation on energy director-less ultrasonic welding of polyetherimide (PEI)- to epoxy-based composites
- (2019) Eirini Tsiangou et al. COMPOSITES PART B-ENGINEERING
- Fractographic evaluation of welded joints of PPS/glass fiber thermoplastic composites
- (2019) Lorena Cristina Miranda Barbosa et al. ENGINEERING FAILURE ANALYSIS
- Energy Characteristics and Failure Mechanisms for Textile Spread Tow Thin Ply Thermoplastic Composites under Low-velocity Impact
- (2019) Somen K. Bhudolia et al. FIBERS AND POLYMERS
- Mechanical properties and failure modes of hybrid fiber reinforced polymer composites with a novel liquid thermoplastic resin, Elium®
- (2019) M.E. Kazemi et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Analysis of fracture toughness in mode II and fractographic study of composites based on Elium® 150 thermoplastic matrix
- (2019) Lorena Cristina Miranda Barbosa et al. COMPOSITES PART B-ENGINEERING
- Diagnostic of manufacturing defects in ultrasonically welded thermoplastic composite joints using ultrasonic guided waves
- (2019) Pedro Ochôa et al. NDT & E INTERNATIONAL
- Ultrasonic Welding of Thermoplastic Composites
- (2019) Irene Fernandez Villegas Frontiers in Materials
- Enhanced Mode I fracture toughness of UHMWPE fabric/thermoplastic laminates with combined surface treatments of polydopamine and functionalized carbon nanotubes
- (2019) Logesh Shanmugam et al. COMPOSITES PART B-ENGINEERING
- Tensile and fatigue properties of single lap joints of aluminium alloy/glass fibre reinforced composites fabricated with different joining methods
- (2018) M. Mariam et al. COMPOSITE STRUCTURES
- Low-velocity impact response of carbon fibre composites with novel liquid Methylmethacrylate thermoplastic matrix
- (2018) Somen K Bhudolia et al. COMPOSITE STRUCTURES
- Ultrasonic welding of carbon/epoxy and carbon/PEEK composites through a PEI thermoplastic coupling layer
- (2018) Irene Fernandez Villegas et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Hybrid welding of carbon-fiber reinforced epoxy based composites
- (2018) Francesca Lionetto et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Mode I fracture toughness and fractographic investigation of carbon fibre composites with liquid Methylmethacrylate thermoplastic matrix
- (2018) Somen K. Bhudolia et al. COMPOSITES PART B-ENGINEERING
- Effect of fixation stitches on out-of-plane response of textile non-crimp fabric composites
- (2018) Somen K Bhudolia et al. Journal of Industrial Textiles
- Ultrasonic Welding of Carbon Fiber Reinforced Nylon 66 Composite Without Energy Director
- (2018) Yu-Hao Gao et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Ultrasonic Welding of Carbon Fiber Reinforced Composite With Variable Blank Holding Force
- (2018) Yang Li et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- A study on amplitude transmission in ultrasonic welding of thermoplastic composites
- (2018) Genevieve Palardy et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Single-Sided Ultrasonic Welding of CF/Nylon 6 Composite without Energy Directors
- (2018) WELDING JOURNAL
- Online Inspection of Weld Quality in Ultrasonic Welding of Carbon Fiber/Polyamide 66 without Energy Directors
- (2018) WELDING JOURNAL
- Influence of Horn Misalignment on Weld Quality in Ultrasonic Welding of Carbon Fiber/Polyamide 66 Composite
- (2018) WELDING JOURNAL
- Shear and tensile joint strengths of carbon fiber-reinforced thermoplastics using ultrasonic welding
- (2018) Keita Goto et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Influence mechanism of welding time and energy director to the thermoplastic composite joints by ultrasonic welding
- (2018) Wang Tao et al. Journal of Manufacturing Processes
- Viscoelastic and drop-weight impact properties of an acrylic-matrix composite and a conventional thermoset composite – A comparative study
- (2018) Winifred Obande et al. MATERIALS LETTERS
- Mechanical and vibration response of insulated hybrid composites
- (2017) Somen K Bhudolia et al. Journal of Industrial Textiles
- Effect of interfacial preheating on welded joints during ultrasonic composite welding
- (2017) Kaifeng Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Decomposition of ultrasonically welded carbon fiber/polyamide 66 and its effect on weld quality
- (2017) Qian Zhi et al. Welding in the World
- Characterization of weld attributes in ultrasonic welding of short carbon fiber reinforced thermoplastic composites
- (2017) Kaifeng Wang et al. Journal of Manufacturing Processes
- Ultrasonic welding of CF/PPS composites with integrated triangular energy directors: melting, flow and weld strength development
- (2016) Irene Fernandez Villegas et al. COMPOSITE INTERFACES
- On the effect of flat energy directors thickness on heat generation during ultrasonic welding of thermoplastic composites
- (2016) Genevieve Palardy et al. COMPOSITE INTERFACES
- Fabrication of a thermoplastic matrix composite stiffened panel by induction welding
- (2015) Silvio Pappadà et al. AEROSPACE SCIENCE AND TECHNOLOGY
- A comparative evaluation between flat and traditional energy directors for ultrasonic welding of CF/PPS thermoplastic composites
- (2015) I. Fernandez Villegas et al. COMPOSITE INTERFACES
- Continuous resistance welding of thermoplastic composites: Modelling of heat generation and heat transfer
- (2015) Huajie Shi et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- On avoiding thermal degradation during welding of high-performance thermoplastic composites to thermoset composites
- (2015) Irene Fernandez Villegas et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Experimental investigation on suitability of carbon fibre thin plies for racquets
- (2015) Somen Kumar Bhudolia et al. Proceedings of the Institution of Mechanical Engineers Part P-Journal of Sports Engineering and Technology
- Induction heated tool assisted friction-stir welding (i-FSW): A novel hybrid process for joining of thermoplastics
- (2015) Bandari Vijendra et al. Journal of Manufacturing Processes
- Strength development versus process data in ultrasonic welding of thermoplastic composites with flat energy directors and its application to the definition of optimum processing parameters
- (2014) Irene Fernandez Villegas COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Ultrasonic welding of plasticized PLA films
- (2014) Neda Stoehr et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Ultrasonic welding of polyamide—influence of moisture on the process relevant material properties
- (2014) Christian Hopmann et al. Welding in the World
- Ultrasonic Welding of Aluminum Alloys to Fiber Reinforced Polymers
- (2013) Guntram Wagner et al. ADVANCED ENGINEERING MATERIALS
- In situ monitoring of ultrasonic welding of thermoplastic composites through power and displacement data
- (2013) Irene Fernandez Villegas JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- Ultrasonic Welding of Hybrid Joints
- (2012) Guntram Wagner et al. JOM
- Ultrasonic evaluation of interlayer interfacial stiffness of multilayered structures
- (2012) Yosuke Ishii et al. JOURNAL OF APPLIED PHYSICS
- Process and performance evaluation of ultrasonic, induction and resistance welding of advanced thermoplastic composites
- (2012) Irene Fernandez Villegas et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- Influence of ultrasonic spot welding on microstructure in a magnesium alloy
- (2011) V.K. Patel et al. SCRIPTA MATERIALIA
- Polymer characterization by ultrasonic wave propagation
- (2010) Francesca Lionetto et al. ADVANCES IN POLYMER TECHNOLOGY
- Ultrasonic welding of advanced thermoplastic composites: An investigation on energy-directing surfaces
- (2010) Irene Fernandez Villegas et al. ADVANCES IN POLYMER TECHNOLOGY
- Mechanisms of joint and microstructure formation in high power ultrasonic spot welding 6111 aluminium automotive sheet
- (2010) D. Bakavos et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Ultrasonic Metal Welding of Aluminium Sheets to Carbon Fibre Reinforced Thermoplastic Composites
- (2009) Frank Balle et al. ADVANCED ENGINEERING MATERIALS
- Study on Heating Process of Ultrasonic Welding for Thermoplastics
- (2009) Zongbo Zhang et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started