Acquiring a low yield ratio well synchronized with enhanced strength of HSLA pipeline steels through adjusting multiple-phase microstructures

Intercritical treatments within the dual-phase (alpha+gamma) region were applied on HSLA pipeline steels, for acquiring a low yield ratio (YR) well balanced with desirable strength. Intercritical cooling treatment (ICT), step cooling treatment (SCT) as well as direct cooling treatment (DCT) after full austenization were designed to obtain an optima multiphase microstructure. Effects of cooling rate in DCT routine and intercritical temperatures in ICT and SCT routines on microstructural evolution and corresponding mechanical properties were also investigated. Especially, the SCT treatment applied with an intercritical temperature of 750 degrees C produces a microstructure composited of soft coarse polygonal ferrite, and hard acicular bainite and lath martensite containing large amounts of dislocation tangles or networks generated by deformation. Such multiple phase constituents guarantee the high strength and remarkable ductility on deformation, meanwhile cleavages propagation is hindered by the high-angle boundaries of bainite and martensite sheaves, which leads to the lowest YR similar to 0.61 combined with highest tensile strength among all. In addition, by using the Swift equation to elucidate the relationship between the phase component and yield ratio, it is found that simply increasing the fraction of low-temperature transformed phases, like high-strength acicular bainite and lathed martensite, or the percentage of soft polygonal ferrite for good ductility, can hardly solve the problem how to achieve ultralow-YR pipeline steels balanced with enhanced strength. The present result proves that, through utilizing the proposed SCT heat treatment on pipeline steels, an ultralow yield ratio similar to 0.61 achieved is synchronized with a desirable strength, which efficiently overcomes the trade-off limit between the strength and yield ratio when applying conventional heat-treatment routines. The fact indicates that, rationally adjusting the content of multi-phase microstructure through optimizing the intercritical treatment conditions, can enable us of realizing the synchronous improvement of the YR and strength in HSLA pipeline steels for real engineering.