Strengthening of an Al0.45CoCrFeNi high-entropy alloy via in situ fabricated duplex-structured composites

The impact of intercritical annealing in conjunction with warm deformation process on microstructure, mechanical properties and TRIP effect in medium-Mn TRIP steels

(2019) Z.C. Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fine tuning the mechanical properties of dual phase steel via thermomechanical processing of cold rolling and intercritical annealing

(2019) Sheida Nikkhah et al.   MATERIALS CHEMISTRY AND PHYSICS

Formation of intermetallics and its effect on microstructure and mechanical properties of 27Cr-4Mo-2Ni super ferritic steels

(2019) Hui-Hu Lu et al.   MATERIALS CHARACTERIZATION

Static recrystallization and grain growth behaviour of Al0.3CoCrFeNi high entropy alloy

(2019) Murugesan Annasamy et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Revealing the Hall-Petch relationship of Al0.1CoCrFeNi high-entropy alloy and its deformation mechanisms

(2019) J. Yang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mechanical properties and microstructural evolution in a superlight Mg-6.4Li-3.6Zn-0.37Al-0.36Y alloy processed by multidirectional forging and rolling

(2019) Furong Cao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Tailoring the microstructure and mechanical properties of AISI 316L austenitic stainless steel via cold rolling and reversion annealing

(2019) Sara Kheiri et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys

(2018) Christian Haase et al.   ACTA MATERIALIA

Twinning-induced plasticity (TWIP) steels

(2018) Bruno C. De Cooman et al.   ACTA MATERIALIA

Microstructure and mechanical properties of Al 0.7 CoCrFeNi high-entropy-alloy prepared by directional solidification

(2018) Gang Liu et al.   INTERMETALLICS

Effect of continuous annealing temperature on microstructure and properties of ferritic rolled interstitial-free steel

(2018) Chen-yang Qiu et al.   International Journal of Minerals Metallurgy and Materials

Mechanical properties of a new high entropy alloy with a duplex ultra-fine grained structure

(2018) N.D. Stepanov et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of annealing heat treatment on microstructural evolution and tensile behavior of Al 0.5 CoCrFeMnNi high-entropy alloy

(2018) Jeong Min Park et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Understanding the mechanical behaviour and the large strength/ductility differences between FCC and BCC Al x CoCrFeNi high entropy alloys

(2017) Jithin Joseph et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Formation of ultrafine-grained microstructure in Al 0.3 CoCrFeNi high entropy alloys with grain boundary precipitates

(2017) Hiroyuki Y. Yasuda et al.   MATERIALS LETTERS

Strengthening in Al 0.25 CoCrFeNi high-entropy alloys by cold rolling

(2017) Jinxiong Hou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Formation process of the {001} fiber texture on iron particles using simple ball milling

(2017) Satoshi Motozuka et al.   POWDER TECHNOLOGY

Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al 0.3 CoCrFeNi high entropy alloy

(2017) B. Gwalani et al.   MATERIALS & DESIGN

A precipitation-hardened high-entropy alloy with outstanding tensile properties

(2016) J.Y. He et al.   ACTA MATERIALIA

Microstructure and texture of heavily cold-rolled and annealed fcc equiatomic medium to high entropy alloys

(2016) G.D. Sathiaraj et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Recrystallization of a novel two-phase FeNiMnAlCr high entropy alloy

(2016) Ian Baker et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of high pressure torsion on microstructures and properties of an Al 0.1 CoCrFeNi high-entropy alloy

(2016) P.F. Yu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strengthening of nanoprecipitations in an annealed Al0.5CoCrFeNi high entropy alloy

(2016) Sizhe Niu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Tailoring nanostructures and mechanical properties of AlCoCrFeNi 2.1 eutectic high entropy alloy using thermo-mechanical processing

(2016) I.S. Wani et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off

(2016) Zhiming Li et al.   NATURE

Enhanced mechanical properties of a CoCrFeNi high entropy alloy by supercooling method

(2016) Jinshan Li et al.   MATERIALS & DESIGN

Nanoscale phase separation in a fcc-based CoCrCuFeNiAl 0.5 high-entropy alloy

(2015) X.D. Xu et al.   ACTA MATERIALIA

Microstructure and properties of a refractory high-entropy alloy after cold working

(2015) O.N. Senkov et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructural features and tensile behaviors of the Al 0.5 CrCuFeNi 2 high-entropy alloys by cold rolling and subsequent annealing

(2015) S.G. Ma et al.   MATERIALS & DESIGN

Superior high tensile elongation of a single-crystal CoCrFeNiAl0.3 high-entropy alloy by Bridgman solidification

(2014) S.G. Ma et al.   INTERMETALLICS

A fracture-resistant high-entropy alloy for cryogenic applications

(2014) B. Gludovatz et al.   SCIENCE

Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system

(2013) J.Y. He et al.   ACTA MATERIALIA

Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys

(2013) Z. Wu et al.   INTERMETALLICS

Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy

(2013) P.P. Bhattacharjee et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures

(2013) Woei-Ren Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructures and properties of high-entropy alloys

(2013) Yong Zhang et al.   PROGRESS IN MATERIALS SCIENCE

Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys

(2012) Woei-Ren Wang et al.   INTERMETALLICS

Computational Thermodynamics Aided High-Entropy Alloy Design

(2012) Chuan Zhang et al.   JOM

Prediction of high-entropy stabilized solid-solution in multi-component alloys

(2012) X. Yang et al.   MATERIALS CHEMISTRY AND PHYSICS

Effect of large strain cold rolling and subsequent annealing on microstructure and mechanical properties of an austenitic stainless steel

(2012) I. Shakhova et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy

(2012) W.H. Liu et al.   SCRIPTA MATERIALIA

Phase separation in equiatomic AlCoCrFeNi high-entropy alloy

(2012) A. Manzoni et al.   ULTRAMICROSCOPY

High work-hardening effect of the pure NiAl intermetallic compound fabricated by the combustion synthesis and hot pressing technique

(2011) H.L. Zhao et al.   MATERIALS LETTERS

Evolution of microstructure, hardness, and corrosion properties of high-entropy Al0.5CoCrFeNi alloy

(2010) Chun-Ming Lin et al.   INTERMETALLICS

Microstructure and mechanical property of as-cast, -homogenized, and -deformed AlxCoCrFeNi (0≤x≤2) high-entropy alloys

(2009) Yih-Farn Kao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Annealing behavior of a modified 5083 aluminum alloy

(2009) Shuangping Lin et al.   MATERIALS & DESIGN

Effect of annealing treatments on the anisotropy of a magnesium alloy sheet processed by severe rolling

(2009) J.A. del Valle et al.   MATERIALS LETTERS

Solid-Solution Phase Formation Rules for Multi-component Alloys

(2008) Y. Zhang et al.   ADVANCED ENGINEERING MATERIALS