标题
Revealing the small post-necking elongation in twinning-induced plasticity steels
作者
关键词
-
出版物
JOURNAL OF MATERIALS SCIENCE
Volume 55, Issue 19, Pages 8285-8302
出版商
Springer Science and Business Media LLC
发表日期
2020-04-01
DOI
10.1007/s10853-020-04477-x
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- The microstructure dependence of drawability in ferritic, pearlitic, and TWIP steels during wire drawing
- (2019) Joong-Ki Hwang JOURNAL OF MATERIALS SCIENCE
- Drawing Direction Effect on Microstructure and Mechanical Properties of Twinning-Induced Plasticity Steel During Wire Drawing
- (2019) Joong-Ki Hwang JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Deformation Behaviors of Flat Rolled Wire in Twinning-Induced Plasticity Steel
- (2019) Joong-Ki Hwang METALS AND MATERIALS INTERNATIONAL
- The effect of deformation twins on the quasi-cleavage crack propagation in twinning-induced plasticity steels
- (2018) Z.C. Luo et al. ACTA MATERIALIA
- Twinning-induced plasticity (TWIP) steels
- (2018) Bruno C. De Cooman et al. ACTA MATERIALIA
- Temperature dependent strain hardening and fracture behavior of TWIP steel
- (2018) Manjunatha Madivala et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A general perspective of Fe–Mn–Al–C steels
- (2018) O. A. Zambrano JOURNAL OF MATERIALS SCIENCE
- Influence of rolling asymmetry on the microstructure, texture and mechanical behavior of high-manganese twinning-induced plasticity steel
- (2018) Frederike Berrenberg et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of strain rate on tensile and serration behaviors of an austenitic Fe-22Mn-0.7C twinning-induced plasticity steel
- (2018) Seung-Yong Lee et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The Role of Grain Orientation and Grain Boundary Characteristics in the Mechanical Twinning Formation in a High Manganese Twinning-Induced Plasticity Steel
- (2018) Vadim Shterner et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Dynamic deformation behavior of a face-centered cubic FeCoNiCrMn high-entropy alloy
- (2018) Junyang He et al. Science Bulletin
- Effect of copper and aluminum contents on wire drawing behavior in twinning-induced plasticity steels
- (2018) Joong-Ki Hwang MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel
- (2018) Yanchun Dong et al. Metals
- Correlation between strain rate sensitivity and characteristics of Portevin-LeChátelier bands in a twinning-induced plasticity steel
- (2017) Xiangde Bian et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Quasi-static and dynamic deformation mechanisms interpreted by microstructural evolution in TWinning Induced Plasticity (TWIP) steel
- (2017) Jaeyeong Park et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Tensile Fracture Modes in Fe-22Mn-0.6C and Fe-30Mn-3Si-3Al Twinning-Induced Plasticity (TWIP) Steels
- (2017) H. K. Yang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Simultaneously increasing both strength and ductility of Fe-Mn-C twinning-induced plasticity steel via Cr/Mo alloying
- (2017) Shuai Liu et al. SCRIPTA MATERIALIA
- Room-temperature blue brittleness of Fe-Mn-C austenitic steels
- (2017) Motomichi Koyama et al. SCRIPTA MATERIALIA
- Softening behavior by excessive twinning and adiabatic heating at high strain rate in a Fe–20Mn–0.6C TWIP steel
- (2016) Y.F. Shen et al. ACTA MATERIALIA
- Stacking Fault Energy Maps of Fe–Mn–Al–C–Si Steels: Effect of Temperature, Grain Size, and Variations in Compositions
- (2016) O. A. Zambrano JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
- The effects of grain size on yielding, strain hardening, and mechanical twinning in Fe–18Mn–0.6C–1.5Al twinning-induced plasticity steel
- (2016) Singon Kang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Different strain rate sensitivities between Fe–22Mn–0.6C and Fe–30Mn–3Si–3Al twinning-induced plasticity steels
- (2016) H.K. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Stacking fault energy and deformation mechanisms in Fe-xMn-0.6C-yAl TWIP steel
- (2016) Jin-Kyung Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Strain rate sensitivity and evolution of dislocations and twins in a twinning-induced plasticity steel
- (2015) Z.Y. Liang et al. ACTA MATERIALIA
- The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation
- (2015) D.T. Pierce et al. ACTA MATERIALIA
- A method to investigate strain rate effects on necking and fracture behaviors of advanced high-strength steels using digital imaging strain analysis
- (2015) Kentaro Sato et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Comparison of twinning evolution with work hardening ability in twinning-induced plasticity steel under different strain rates
- (2015) H.K. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Dynamic strain aging of twinning-induced plasticity (TWIP) steel in tensile testing and deep drawing
- (2015) J.G. Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Strain hardening rate sensitivity and strain rate sensitivity in TWIP steels
- (2015) Alexandra Bintu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural evolution and deformation behavior of twinning-induced plasticity (TWIP) steel during wire drawing
- (2015) Joong-Ki Hwang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the Mechanisms of Different Work-Hardening Stages in Twinning-Induced Plasticity Steels
- (2015) Peng Zhou et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- In situ observations of transgranular crack propagation in high-manganese steel
- (2015) Sung-Il Baik et al. SCRIPTA MATERIALIA
- Non-linear Correlation Between Uniaxial Tensile Properties and Shear-Edge Hole Expansion Ratio
- (2014) Surajit Kumar Paul JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Strain rate effects on tensile deformation behaviors for Fe–22Mn–0.6C–(1.5Al) twinning-induced plasticity steel
- (2014) H.K. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolution and strengthening mechanisms of Fe–23Mn–0.3C–1.5Al TWIP steel during cold rolling
- (2014) Pavel Kusakin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of cold rolling on microstructure, texture and mechanical properties of low carbon high Mn TWIP steel
- (2014) N.K. Tewary et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Cracking in a Fe–25Mn–3Si–3Al Steel
- (2014) Xiaoyang Fang et al. Materials Research Letters
- Texture, misorientation and mechanical anisotropy in a deformed dual phase stainless steel weld joint
- (2013) R. Badji et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Damage evolution in TWIP and standard austenitic steel by means of 3D X ray tomography
- (2013) D. Fabrègue et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Comparison of work hardening and deformation twinning evolution in Fe–22Mn–0.6C–(1.5Al) twinning-induced plasticity steels
- (2013) H.K. Yang et al. SCRIPTA MATERIALIA
- Effects of Al on microstructure and tensile properties of C-bearing high Mn TWIP steel
- (2012) J.-E. Jin et al. ACTA MATERIALIA
- Unusual grain-size and strain-rate effects on the serrated flow in FeMnC twin-induced plasticity steels
- (2012) Lihe Qian et al. JOURNAL OF MATERIALS SCIENCE
- Stacking fault energy and tensile deformation behavior of high-carbon twinning-induced plasticity steels: Effect of Cu addition
- (2012) Xian Peng et al. MATERIALS & DESIGN
- Effects of cold rolling on microstructure and mechanical properties of Fe–30Mn–3Si–4Al–0.093C TWIP steel
- (2012) Y.F. Shen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Abnormal room temperature serrated flow and strain rate dependence of critical strain of a Fe–Mn–C twin-induced plasticity steel
- (2012) Lihe Qian et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the origin of dynamic strain aging in twinning-induced plasticity steels
- (2011) Seok-Jae Lee et al. ACTA MATERIALIA
- High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
- (2011) O. Bouaziz et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Texture evolution of cold rolled and annealed Fe–24Mn–3Al–2Si–1Ni–0.06C TWIP steel
- (2011) Ahmed A. Saleh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Work hardening associated with ɛ-martensitic transformation, deformation twinning and dynamic strain aging in Fe–17Mn–0.6C and Fe–17Mn–0.8C TWIP steels
- (2011) Motomichi Koyama et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of Al addition on deformation and fracture mechanisms in two high manganese TWIP steels
- (2011) Kwang-Geun Chin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Estimations of the True Stress and True Strain until Just before Fracture by the Stepwise Tensile Test and Bridgman Equation for Various Metals and Alloys
- (2011) N. Tsuchida et al. MATERIALS TRANSACTIONS
- Constitutive Modeling of the Tensile Behavior of Al-TWIP Steel
- (2011) Jinkyung Kim et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of Cu addition on the mechanical behavior of austenitic twinning-induced plasticity steel
- (2011) Sangwon Lee et al. SCRIPTA MATERIALIA
- Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate
- (2010) S. Curtze et al. ACTA MATERIALIA
- The Effect of Strain-Rate Sensitivity on Formability of AA 5754-O at Cold and Warm Temperatures
- (2010) Fahrettin Ozturk et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Tensile deformation behavior of high manganese austenitic steel: The role of grain size
- (2010) G. Dini et al. MATERIALS & DESIGN
- Dependence of texture evolution on initial orientation in drawn single crystal copper
- (2010) J. Chen et al. MATERIALS CHARACTERIZATION
- Damage observation in a high-manganese austenitic TWIP steel by synchrotron radiation computed tomography
- (2010) J. Lorthios et al. SCRIPTA MATERIALIA
- Stretch-Flangeability of High Mn TWIP steel
- (2010) L. Chen et al. STEEL RESEARCH INTERNATIONAL
- Strain hardening behavior of a Fe–18Mn–0.6C–1.5Al TWIP steel
- (2009) Jae-Eun Jin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels
- (2009) A. Saeed-Akbari et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions
- (2008) D. Barbier et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure
- (2008) R. Ueji et al. SCRIPTA MATERIALIA
- Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe–Mn–C steel
- (2007) A. Dumay et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started