Review
Chemistry, Physical
Muhammad Zubair, Muhammad Muneeb Ul Hassan, Muhammad Taqi Mehran, Mutawara Mahmood Baig, Sajjad Hussain, Faisal Shahzad
Summary: MXenes are a family of 2D transition metal carbides, nitrides, and carbonitrides that exhibit promising electrocatalytic properties for water electrolysis. MXenes can act as efficient electrocatalysts for both HER and OER due to their metallic nature and surface properties.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
(2022)
Article
Chemistry, Applied
Limei Lu, Yihe Zhang, Zhensheng Chen, Feng Feng, Kaixuan Teng, Shuting Zhang, Jialin Zhuang, Qi An
Summary: This study reports the synergy effects in promoting catalytic power in ternary transition metal Zn, Co, Ni alloy nanoparticles that embeds in the carbonized Ppy/CNT multilayered matrix. Experimental and DFT calculation results indicate that the ternary transition metal catalysts in the N-doped carbon matrix present special electronic structure, which benefits the reversible transition-state adsorption in HER and OER and render the catalysts high conductivity in room temperature. These findings contribute to the further development of efficient transition metal HER and OER catalysts.
CHINESE JOURNAL OF CATALYSIS
(2022)
Article
Biophysics
Yujia Lv, Dawei Liang, Shanfu Lu, Doron Aurbach, Yan Xiang
Summary: This study demonstrates for the first time that bacteriorhodopsin is an n-type semiconductor and plays an important role in combined electrodes with p-n junction. Through photo-electrochemical methods, it was found that the self-corrosion of bR integrated Cu2O electrodes is significantly delayed, while the photocurrent of bR integrated CuSCN electrodes is enhanced by about 400%.
BIOSENSORS & BIOELECTRONICS
(2021)
Article
Chemistry, Inorganic & Nuclear
Zongxu Li, Yonghang Zeng, Dongbin Xiong, Lina Zhou, Jianqing Zhou, Yahui Yang, Faqi Zhan, Kai Wang, Yue Du, Yisi Liu
Summary: This study successfully prepared a novel bifunctional electrocatalyst with excellent electrocatalytic properties in alkaline media, which can be used for efficient Zn-air batteries.
INORGANIC CHEMISTRY FRONTIERS
(2023)
Article
Chemistry, Multidisciplinary
Xiaoxiao Jin, Yikang Wu, Chengbiao Dai, Jiannan Sun, Meiying Ye, Jinhua Liu, Heyong Cheng
Summary: The formation of Betti bases has attracted significant attention due to their important roles in medicine and asymmetric metal catalysis. In this study, a mild, efficient, and environmentally friendly method for synthesizing Betti bases without the use of any catalysts in microdroplets was developed. The microdroplet method accelerated the Betti reaction and achieved high yields compared to traditional methods.
Article
Environmental Sciences
S. Sathish, S. Supriya, J. Aravind Kumar, D. Prabu, D. Marshiana, M. Rajasimman, Yasser Vasseghian
Summary: This work focuses on the synthesis and characterization of photocatalytic activity of Co-Zn/Al2O3 nanocomposite. The maximum caffeine removal rate of 92% was achieved by optimizing the process parameters. Experimental data fits well with the pseudo first order kinetic model, indicating the catalyst's high stability and maximum removal efficiency.
Article
Environmental Sciences
Yawen Chen, Kangping Cui, Tong Liu, Minshu Cui, Yan Ding, Yihan Chen, Xing Chen, Wen -Wei Li, Chen-Xuan Li
Summary: Bimetallic catalysts have been widely used for peroxymonosulfate (PMS) activation, but the synergy between Zn and other transition metals in PMS activation is rarely studied. In this work, a Co/Zn co-doped carbonaceous catalyst derived from ZIF-67@ZIF-8 (Z67@8D) was prepared and used to activate PMS for sulfamethoxazole (SMX) degradation. The Co/Zn synergy was revealed by experiments and density functional theory (DFT) calculations, showing that Zn can adjust the electron distribution of Co and enhance PMS decomposition and singlet oxygen (O-1(2)) formation. The catalyst also demonstrated good stability, reusability, and universal applicability.
SCIENCE OF THE TOTAL ENVIRONMENT
(2022)
Article
Chemistry, Multidisciplinary
Weijie Zhu, Fen Yao, Qiongfei Wu, Qiu Jiang, Jinxian Wang, Zhoucheng Wang, Hanfeng Liang
Summary: Researchers have developed a Ru/beta-Co(OH)(2) heterostructure catalyst that shows high activity, selectivity, and stability in electrocatalytic nitrate reduction reaction. The catalyst efficiently converts nitrate pollutants into valuable ammonia products.
ENERGY & ENVIRONMENTAL SCIENCE
(2023)
Article
Chemistry, Inorganic & Nuclear
Xiaolong Guo, Xinyu Zhang, Yong Wu, Yuci Xin, Dongmei Li, Yuxin Zhang, Peng Yu
Summary: Spinel copper cobaltite (CuCo2O4), as a bifunctional oxygen electrocatalyst, has attracted significant research interest due to its tailored electronic structure and adjustability of active area. However, its poor oxygen evolution reaction (OER) performance hinders its practical use in rechargeable zinc-air batteries. Therefore, researchers have constructed a CuCo2O4/NiFe LDH oxide/hydroxide interface to enhance OER activity and reduce charging overpotential. The achieved electrocatalysts show improved OER performance, resulting in high round-trip efficiency and low voltage gap in zinc-air batteries.
DALTON TRANSACTIONS
(2023)
Article
Chemistry, Physical
Cheng-Wei Wu, Fan Li, Yu-Jia Zeng, Hongwei Zhao, Guofeng Xie, Wu-Xing Zhou, Qingquan Liu, Gang Zhang
Summary: By combining first-principles calculations, machine learning fitted potential, and solving the phonon Boltzmann transport equation, we propose a new group of two-dimensional covalent organic frame semiconductors 2AL-PR-X (X = 2H, Ni, Pt, Zn) as promising organic thermoelectric materials. We found that embedding metal atoms in the center can greatly enhance the stability of the porphyrin ring and reduce thermal conductivity. Among the studied 2AL-PR-X materials, 2AL-PR-Pt shows the best thermoelectric performance with a peak ZT of 0.32 at room temperature and around 0.9 at 800 K.
APPLIED SURFACE SCIENCE
(2023)
Article
Environmental Sciences
Joshua T. Padilla, H. Magdi Selim, Lewis A. Gaston
Summary: The study investigated the competitive sorption and transport of nickel (Ni) and zinc (Zn) in Olivier and Windsor soils. The results showed that the sorption of Ni and Zn was mutually reduced in multicomponent systems, indicating competition for sorption sites. When applied concurrently, competition increased the mobility of both ions during miscible displacement experiments. A novel CDI isotherm provided a superior description of the competitive batch data, while CDIT and SRST generally described the transport data well. The CDI/CDIT approach may be more generally applicable to multicomponent systems and warrants further study.
JOURNAL OF CONTAMINANT HYDROLOGY
(2023)
Article
Chemistry, Physical
Kaiyue Chen, Xingkun Wang, Canhui Zhang, Ren Xu, Huanlei Wang, Lei Chu, Minghua Huang
Summary: This study introduces the MnS phase into the Mott-Schottky Co/Co9S8 to create a three-phases Co/Co9S8/MnS heterojunction catalyst on defect-rich N-doped mesoporous carbon substrate. It improves the bifunctional ORR/OER activities and shows promising potential for practical applications.
MATERIALS TODAY ENERGY
(2022)
Article
Chemistry, Multidisciplinary
Hai-Lang Jia, Hong-Cheng Li, Jiao Zhao, Ming-Yun Guan
Summary: In this study, an excellent HER catalyst was prepared by utilizing a doping strategy and embedding ruthenium nanoparticles on carbon nanotubes. The catalytic performance of this catalyst surpassed that of commercial platinum catalysts. The catalyst exhibited outstanding performance under both acidic and alkaline conditions, and it was found that the dispersed ruthenium nanoparticles played a crucial role in HER catalysis.
NEW JOURNAL OF CHEMISTRY
(2022)
Article
Chemistry, Physical
Jia Zhou, Wen Yan, Zhuofan Gan, Chengyong Shu, Zhe Zheng, Wei Tang, Tiantian Wu, Keyu Xie, Ming Ma
Summary: Electric-driven CO2 reduction is a promising strategy for converting CO2 into valuable chemicals and fuels, but finding low cost and efficient catalysts remains a challenge. In this study, a highly selective and stable layer-stacked Zn catalyst was developed for CO2 reduction to CO through an efficient and facile electrochemical method. The catalyst exhibited more than 90% Faradaic efficiency for CO production and maintained similar selectivity for more than 70 hours, surpassing the durability of previous Zn-based catalysts. The robust catalytic performance could be easily recovered through simple electrochemical methods, thanks to the maintained layer-stacked structure.
ACS APPLIED ENERGY MATERIALS
(2023)
Article
Materials Science, Multidisciplinary
Fang Yang, Zhenzhen Wang, Yonghe Liu, Shuai Yang, Ze Yu, Qichang An, Zhaoqing Ding, Fanqi Meng, Yanwei Cao, Qinghua Zhang, Lin Gu, Miao Liu, Yongqing Li, Jiandong Guo, Xiaoran Liu
Summary: Controlling the interaction between localized spins and itinerant electrons at oxide interfaces can result in exotic magnetic states. In this study, SrTiO3/LaTiO3/SrTiO3 heterostructures with varying thickness of the LaTiO3 layer (n monolayers) were used to investigate magnetic interactions in a two-dimensional electron gas system. Significant Kondo effect was observed when the LaTiO3 layer was thin, indicating strong interaction between itinerant electrons and localized magnetic moments at the interfaces. This effect was greatly inhibited when the LaTiO3 layer was thicker. Notably, distinct Shubnikov-de Haas oscillations and a nonzero Berry phase were observed in the thinner LaTiO3 layers, but absent in the thicker one. These phenomena were interpreted as a result of subband splitting and symmetry breaking due to the interplay between interfacial Rashba spin-orbit coupling and magnetic orderings in the heterostructures. These findings provide insights into manipulating nontrivial electronic band structures at complex oxide interfaces.
Article
Engineering, Environmental
Xinxin Zhang, Mingyang Jiao, Zhipeng Chen, Xin Ma, Zhiheng Wang, Nailiang Wang, Xiangping Zhang, Licheng Liu
Summary: The evolution from micron-sized bulk ZnSn(OH)6-precursor to functionalized In-O-ultrathin-SnS2 nanosheets was achieved by gradually thinning method combined with dual-ion co-substitution strategy, showing remarkable activity and current density in CO2 electrocatalytic reduction.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Applied
Zhiheng Wang, Mingyang Jiao, Yvxiao Zhu, Hone He, Licheng Liu
Summary: The presence of alkali metal cations has a significant impact in the hydrothermal synthesis of SSZ-13 zeolite, leading to faster synthesis and prevention of gel formation.
MICROPOROUS AND MESOPOROUS MATERIALS
(2022)
Article
Electrochemistry
Yuchen Wei, Zhipeng Chen, Lei Yang, Hongqiang Li, Xiaojun He
Summary: This study successfully prepared N/P/S co-doped carbon nanosheets with abundant pores and active sites through an acid-free and alkali-free synthesis method. The NPS-CN electrode exhibited high specific capacitance and good rate performance in a three-electrode system, as well as excellent cycle stability in a two-electrode system.
Article
Chemistry, Multidisciplinary
Hongqiang Li, Kaining Gan, Ran Li, Huawei Huang, Jiabao Niu, Zhipeng Chen, Jian Zhou, Yan Yu, Jieshan Qiu, Xiaojun He
Summary: In this study, researchers developed a facile carbonization coupled oxidation strategy to produce NiO clusters-decorated Ni-N-C SACs. These SACs exhibited a high Faradaic efficiency of CO and a high turnover frequency for CO production even at high overpotentials. Density functional theory calculations revealed that the highly dispersed NiO clusters played a crucial role in enhancing the reaction kinetics for CO production. This study provides a new pathway for the construction of oxygen-regulated metal-based SACs and various catalytic applications.
ADVANCED FUNCTIONAL MATERIALS
(2023)
Article
Chemistry, Physical
Xinxin Zhang, Zhiheng Wang, Zhipeng Chen, Yuxiao Zhu, Ziyong Liu, Fuli Li, Wei Zhou, Zichao Dong, Jingxin Fan, Licheng Liu
Summary: The unique molecular trapdoor mechanism of chabazite zeolites provides an ideal platform for CO2 integrative adsorption and conversion. A mesoporous In-SSZ-13((MP)) catalyst was synthesized, which achieved high efficiency and current density for electrochemical CO2 reduction reaction (CO2RR) with uniformly dispersed indium active sites. Experimental results combined with DFT calculations reveal the reaction mechanism of In-SSZ-13((MP)) electrocatalytic reduction of CO2.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2022)
Review
Materials Science, Multidisciplinary
Jian Zhou, Hong-Yu Hu, Hong-Qiang Li, Zhi-Peng Chen, Chang-Zhou Yuan, Xiao-Jun He
Summary: This review summarizes the advanced carbon materials used as both cathodes and anodes in hybrid metal-ion capacitors (MICs). The key structural/chemical factors for improving the electrochemical performance of carbon materials are highlighted, along with the challenges and opportunities for future research on carbon materials in MICs.
Article
Chemistry, Applied
Xinxin Zhang, Yuxiao Zhu, Ziyong Liu, Fuli Li, Wei Zhou, Zichao Dong, Jingxin Fan, Licheng Liu, Chunhua Du
Summary: The combination of a powerful CO2-enriching carrier and a robust active component provides a new idea for the construction of efficient catalysts for electrocatalytic CO2 reduction. In this study, a Cu-In/PNGC composite catalyst is obtained by using perforated nitrogen-rich graphene-like carbon nanolayers (PNGC) as the carrier and In-doped Cu2(OH)3(NO3) nanosheet patches as the active component. The Cu-In/PNGC catalyst exhibits high Faradaic efficiency and remarkable CO partial current density for electrocatalytic CO2 reduction.
JOURNAL OF ENERGY CHEMISTRY
(2022)
Article
Chemistry, Multidisciplinary
Yuxiao Zhu, Wei Zhou, Zichao Dong, Xinxin Zhang, Zhipeng Chen, Ziyong Liu, Fuli Li, Jingxin Fan, Licheng Liu, Mingyang Jiao
Summary: In this study, nanosized LaInO3 perovskite catalyst was synthesized and applied to CO2 electrocatalytic reduction reaction (CO2RR), showing excellent activity for formate production. The highest faradaic efficiency of formate reaches 91.4% and the partial current density of formate is 106.8 mA cm(-2) at a moderate overpotential of 0.9 V. Experimental research and DFT calculations indicate that the outstanding activity of LaInO3 is mainly attributed to its intensive adsorption stability to free radical intermediates (CO2 center dot-) and lower desorption free energy of formate products during reaction.
JOURNAL OF CO2 UTILIZATION
(2023)
Article
Chemistry, Physical
Mingyang Jiao, Zhipeng Chen, Nailiang Wang, Licheng Liu
Summary: High-performance electrocatalysts play a crucial role in the hydrogen evolution reaction (HER) in water electrolysis. In this study, cobalt-based dual-atom catalysts were rationally screened using density functional theory calculations and successfully prepared on carbon paper. The experiment and theoretical calculations consistently demonstrated the significant potential of DFT calculation-assisted catalyst development.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2023)
Article
Engineering, Environmental
Zhipeng Chen, Dongdong Zhang, Yusi Zhao, Dedong Jia, Hongna Zhang, Licheng Liu, Xiaojun He
Summary: An aminated In-MOF-derived In/In2O3 hollow nanotube catalyst (In/In2O3 Ho-nt) is reported, which can maintain a stable In-0/In3+ heterostructure during CO2 electrocatalysis. The stable In-0/In3+ species boost the formate FE to over 90% with a highest current density of approximately 650 mA cm(-2) in a wide potential range from 0.8 V to 1.2 V vs. RHE.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Materials Science, Multidisciplinary
Jianming Yang, Yujian Chen, Chen Liu, Hu Wang, Xin Yan, Xianzhi Chai, Zhipeng Chen, Youyi Xia, Hong Gao, Hexin Zhang, Xia Liao
Summary: In this study, lightweight, flexible and high-performance composite foams (TPU/EG/Ag) with a three-dimensional isolated conductive network were successfully manufactured by combining supercritical carbon dioxide (scCO2) foaming and chemical deposition. The composite foam achieved high conductivity (171.2 S/m) and EMI shielding effectiveness (56.3 dB) with only 0.58 vol% Ag, thanks to the volume exclusion of pores and the selective enrichment of Ag nanoparticles. The weight reduction rate of the composite exceeded 74%, and the density of the foamed sample could be as low as 0.21 g/cm3. Interestingly, the presence of porosity not only alleviated impedance mismatch and reduced reflectivity of the composite, but also improved compressible recovery performance and shielding stability. This work proposes a new idea for lightweight and flexible EMI shielding composites, opening a new path for the development of next-generation absorption-based EMI shielding materials.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
(2023)