4.7 Article

Effect of ionic radius on colossal permittivity properties of (A, Ta) co-doped TiO2 (A = alkaline-earth ions) ceramic

期刊

CERAMICS INTERNATIONAL
卷 46, 期 8, 页码 12059-12066

出版社

ELSEVIER SCI LTD
DOI: 10.1016/j.ceramint.2020.01.247

关键词

Colossal permittivity; TiO2 ceramics; Ionic radius

资金

  1. National Natural Science Foundation of China [51802003, 51572113]
  2. Natural Science Foundation of Anhui Provincial Education Department [KJ2018A0041]

向作者/读者索取更多资源

(A, B) co-doped TiO2 ceramics attract great interests due to the excellent dielectric properties. In this work, the (A, Ta) co-doped TiO2 ceramics were prepared by a solid state reaction process. The effect of the acceptors ionic radius on the structure and properties of TiO2 ceramics was investigated. According to XRD analysis, the main phase is rutile TiO2 for all samples. Due to the larger ionic radius, it is hard to replace Ti site in TiO6 octahedron. As a result, the content of the secondary phase increased with increasing ionic radius. The dielectric properties were significantly enhanced by co-doping of alkaline-earth ions and tantalum ions, and the best dielectric constant obtained at 3% (Sr, Ta) co-doped compositions, where epsilon' = 2.1 x 10(5), tan delta = 0.21. Meanwhile, the XPS analysis suggested that the concentration of the defect dipoles exhibit a maximum in Sr-doped TiO2 ceramics. The larger ionic radius of the acceptors leads to the more stability of the defect structure. However, for Ba ions, the replacement concentration decreased due to the excessive ionic radius, which in turn reduces the defect concentration. This work is meaningful for the further investigations on TiO2-based colossal permittivity materials.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

Article Materials Science, Multidisciplinary

Adding Hf element to improve the strength and wear resistance of diamond brazed with Ni-based boron-free brazing filler metal

Songhua Si, Zichao Ding, Ruzhong Zuo, Lei Zhang, Huawei Sun, Bing Cui, Dong Xu

Summary: This study optimized the performance of NiCrSiCuSn boron-free brazing filler metal by adding Hf element, improving the bonding strength and wear resistance with diamond, and reducing the thermal damage and graphitization of diamond.

DIAMOND AND RELATED MATERIALS (2022)

Article Engineering, Electrical & Electronic

Effect of electric field on the microstructure and electrical properties of (In plus Ta) co-doped TiO2 colossal dielectric ceramics

Zhentao Wang, Pai Peng, Liang Zhang, Nan Wang, Bin Tang, Bing Cui, Juan Liu, Dong Xu

Summary: Flash-sintering was used to fabricate (In + Ta) co-doped TiO2 colossal dielectric ceramics, resulting in significantly reduced processing time and sintering temperature, as well as improved grain size and microstructure uniformity compared to conventional sintering. Flash-sintered samples exhibited similar electrical properties to conventionally sintered ones, with the best dielectric properties observed at 550 V/cm electric field.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

Article Engineering, Electrical & Electronic

Flash sintering preparation and colossal dielectric origin of (Al0.5Ta0.5)0.05Ti0.95O2 ceramics

Zhentao Wang, Mengyang Shi, Juan Liu, Jiamao Li, Lei Zhang, Zhan Cheng, Jian Qin, Yongtao Jiu, Bin Tang, Dong Xu

Summary: In this study, (Al, Ta) co-doped TiO2 (ATTO) ceramics were prepared by flash sintering under different electric fields, with the best comprehensive performance observed at 550 V/cm. The ATTO ceramics exhibited single rutile structure, with increasing grain size as the electric field increased. XPS and IS results indicated that the good dielectric properties were due to the internal barrier layer capacitance effect, showing great potential for dual-function capacitive varistor ceramics.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

Article Engineering, Electrical & Electronic

Microstructure and properties of ZnO-Bi2O3-based varistor ceramics via flash sintering

Ming Jiang, Mengyang Shi, Jiamao Li, Juan Liu, Lei Zhang, Jian Qin, Yongtao Jiu, Bin Tang, Dong Xu

Summary: This study examines the effects of MnO2 on ZnO-Bi2O3-based varistors prepared using flash sintering technique. The results show that MnO2 doping significantly reduces the onset temperature and improves the electrical performance of the varistors. Among the samples, the one with 0.5 mol% MnO2 doping exhibits the highest improvement in terms of nonlinear coefficient, leakage current, threshold voltage, and dielectric constant.

MICROELECTRONICS INTERNATIONAL (2022)

Article Metallurgy & Metallurgical Engineering

Influence of Ge content on the interfacial characteristics and wear resistance of brazed synthetic diamond grains of Cu-based composite filler

Bing Cui, Peipei Yan, Weixing Zhao, Ruzhong Zuo, Lei Zhang, Zhan Cheng, Yongtao Jiu, Jian Qin, Yucan Fu, Dong Xu

Summary: The aim of this paper is to propose a method of improving the interfacial characteristics and wear resistance of brazed diamond by incorporating Ge element into a Cu-based composite filler. The results showed that the addition of 1 wt% Ge led to defect-free morphology and high diamond protrusion in the brazed diamond joints, increased interfacial layer thickness, and removal amount of ground tiles. Moreover, the drop rate and uneven wear rate of diamond were decreased by 12.5% and 25%, respectively.

WELDING IN THE WORLD (2022)

Article Materials Science, Multidisciplinary

The synergistic effect of sodium phytate and benzotriazole as corrosion inhibitors of 20SiMn steel in 3.5 wt-% NaCl solution

Fengting Cao, Zequan He, Tiegang Wang, Guangyao Gao, Qixiang Fan, Yanmei Liu, Jubo Peng, Shanshan Cai, Dong Xu, Jiantao Tao

Summary: The synergistic inhibition effect of sodium phytate and benzotriazole on 20SiMn steel in seawater was studied. They form a protective bilayer film, with benzotriazole acting through chemisorption and sodium phytate through physisorption. The combination of the two shows a better inhibition efficiency.

CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2023)

Article Materials Science, Ceramics

A comparative study of microstructure and electrical properties of (Al, Nb) co-doped TiO2 ceramics by different sintering methods

Zhentao Wang, Tianyu Li, Jiamao Li, Feiwen Zhao, Ruzhong Zuo, Lei Zhang, Zhan Cheng, Dong Xu

Summary: (Al, Nb) co-doped TiO2 colossal dielectric ceramics were prepared using conventional sintering, flash sintering, and two-step flash sintering methods. The flash sintering and two-step flash sintering reduced processing temperature by 20% and sintering time by 30 times compared to conventional sintering. The two-step flash sintering samples with finer grain size exhibited higher permittivity. The TSFS ceramic sample sintered at 1080 degrees C showed the best overall performance with a dielectric constant of 1.4 x 105, dielectric loss of 0.57 at 1 kHz, and a nonlinear coefficient of 5.8. The excellent dielectric properties were attributed to the internal barrier layer capacitance model.

CERAMICS INTERNATIONAL (2023)

Article Materials Science, Multidisciplinary

Adding Zr element to improve the strength and mechanical properties of diamond vacuum-brazed with Ni-Cr boron-free filler alloy

Bing Cui, Pengbo Wang, Weixing Zhao, Zichao Ding, Ruzhong Zuo, Lei Zhang, Yongtao Jiu, Zhan Cheng, Jian Qin, Yucan Fu, Dong Xu

Summary: In order to improve the wear resistance and solve the thermal damage of brazed diamond, a new boron-free filler alloy Ni-Cr-Si-Cu-Sn with Zr was proposed. The microstructure of the filler alloy and the morphology of interface carbides were observed. The graphitization of brazed diamond was analyzed by Raman spectroscopy. The hardness and grinding properties of brazed diamond were measured. The results show that the composite alloy has smaller grain size, better morphology of brazed diamond, reduced graphitization and thermal damage of diamond. The addition of Zr in the alloy improved the interfacial hardness and grinding performance of diamond sample, and the uniform carbide connection ensured the high strength control of the composite alloy on the diamond.

DIAMOND AND RELATED MATERIALS (2023)

Article Materials Science, Multidisciplinary

Flash Sintering Preparation and Characterizations of (M0.5Ta0.5)0.05Ti0.95O2 (M = Al, Ga, In) Colossal Dielectric Ceramics

Zhentao Wang, Haisheng Zheng, Lei Zhang, Zhan Cheng, Feiwen Zhao, Ruzhong Zuo, Tianyu Li, Dong Xu

Summary: In this study, (M0.5Ta0.5)(0.05)Ti0.95O2 (M=Al, Ga, In) ceramic materials were successfully prepared by Flash Sintering (FS) under an electric field of 550 V cm(-1) at 1200 degrees C for 18 min. The influences of different ionic radius on flash sintering behavior, crystal structure, microstructure and dielectric properties of TiO2-based colossal permittivity (CP) ceramics were systematically investigated. FS can reduce the sintering temperature by 200 degrees C and shorten the sintering time by more than 12 times. The results show that all flash sintering samples were pure rutile TiO2 structure.

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2023)

Article Materials Science, Multidisciplinary

Microstructure and properties of brazed diamond with Pr-modified Ni-Cr filler metals

Shuaishuai Feng, Tian Jin, Banglun Wang, Zhan Cheng, Chunxia Zhang, Sujuan Zhong, Dong Xu

Summary: The aim of this study is to improve the mechanical properties of diamond tools by brazing diamonds with a modified Ni-Cr filler alloy to achieve the reduction of thermal damage. Rare earth Pr doping into Ni-Cr filler alloy is brazed at 1080 degrees C under vacuum and tested for organization and properties. The results show that the doping of Pr refines the grain size and carbide, improves the bonding strength of the diamond, and reduces the thermal damage.

DIAMOND AND RELATED MATERIALS (2023)

Article Materials Science, Multidisciplinary

Dielectric Performance of DC Electric Field-Assisted Flash Sintered (Sr, Sb) co-doped TiO2 Ceramics

Liang Zhang, Shuaishuai Feng, Nan Wang, Jiamao Li, Hailing Li, Dong Xu

Summary: In this study, (Sr + Sb) co-doped TiO2 colossal dielectric ceramics were successfully fabricated using flash sintering technology under an electric field of 500 V cm(-1). The flash sintering parameters, phase structure, and electrical properties of the ceramics were analyzed. Compared to conventional sintering methods, the flash sintering process reduced the sintering temperature by approximately 200 degrees C and the sintering time by 90% (18 min, 1150 degrees C). The co-doped TiO2 ceramics showed excellent dielectric properties (epsilon' > 10(4)). The successful preparation of co-doped rutile TiO2 dielectric ceramics expands the application range of flash sintering technology and holds great research significance.

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2023)

Article Materials Science, Multidisciplinary

Exploring the trace rare earth Sm on the microstructure and mechanical performance of brazed diamonds by Ni-Cr filler alloy

Nan Wang, Tian Jin, Huawei Sun, Sujuan Zhong, Guodong Wen, Zhongfang Yan, Dong Xu

Summary: In this study, the properties of Ni-based filler alloy were improved by adding rare earth Sm and brazing at a temperature of 1080°C. Tests were conducted on the filler alloy and brazed joints using electron microscopy (SEM), energy spectroscopy (EDS), and X-ray diffractometry (XRD). The results showed that the addition of rare earth Sm refined the grain of the filler alloy, increased its hardness, and reduced the thermal damage of the diamond after welding.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Article Materials Science, Multidisciplinary

Experimental Study on Anti-Icing of Robust TiO2/Polyurea Superhydrophobic Coating

Yizhi Du, Lina Hu, Liting Dong, Shuming Du, Dong Xu

Summary: This study aims to solve the icing problem of wind turbine blades in low-temperature environments and improve the power generation efficiency of wind turbines. Modified TiO2 particles, butyl acetate solvent, polyaspartic acid ester polyurea (PAE polyurea), and Crestron N75 curing agent were mixed and sprayed on the epoxy resin board surface. The results showed that the mechanical stability and anti-icing performance of the coating were optimal when the ratio of modified TiO2 particles to PAE polyurea was 1.5. This study provides a simple method to prepare a robust superhydrophobic coating and promotes the application of superhydrophobic coatings in the field of passive anti-icing of wind turbine blades.

COATINGS (2023)

Article Chemistry, Physical

Solid oxide electrolyzer positive electrodes with a novel microstructure show unprecedented stability at high current densities

Qing Ni, Yu Li, Zongchao Zhu, Zhexiang Yu, Dong Xu, Xiaoming Hua, Yi Zhen, Lin Ge, Lei Bi

Summary: The authors present a stable anode design for high-efficiency electrolysis at high current densities, integrating a nano La0.6Sr0.4CoO3-δ (LSC) catalyst network with robust microchannels. This controlled structured electrode allows rapid gas diffusion, provides sufficient active sites, and ensures firm anode-electrolyte interface adhesion, resulting in highly stable and efficient electrolysis. The as-prepared cell structure exhibits an extremely low polarization resistance of 0.010Ωcm² and demonstrates high durability at large current densities for over 100 hours at 800°C. The findings suggest the potential application of this design in high-efficiency energy conversion systems.

JOURNAL OF MATERIALS CHEMISTRY A (2023)

Article Metallurgy & Metallurgical Engineering

Preparation and characterization of Mg-doped CaCu3Ti4O12 thin films

Ming Jiang, Zhan Cheng, Dan Zhao, Lei Zhang, Dong Xu

Summary: In this study, Mg-doped CCTO thin films were prepared by a modified sol-gel method, and a comparative study on their microstructure and electrical properties was carried out. The results showed that Mg doping could reduce the grain size of CCTO films and improve the dielectric constant and frequency stability.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2022)

暂无数据