Flexible All‐Solution‐Processed Organic Solar Cells with High‐Performance Nonfullerene Active Layers

Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages

(2019) Yong Cui et al.   Nature Communications

Ternary Blended Fullerene‐Free Polymer Solar Cells with 16.5% Efficiency Enabled with a Higher‐LUMO‐Level Acceptor to Improve Film Morphology

(2019) Kun Li et al.   Advanced Energy Materials

Slot-die printed non-fullerene organic solar cells with the highest efficiency of 12.9% for low-cost PV-driven water splitting

(2019) Qiang Wu et al.   Nano Energy

Eco‐Compatible Solvent‐Processed Organic Photovoltaic Cells with Over 16% Efficiency

(2019) Ling Hong et al.   ADVANCED MATERIALS

13.9%‐Efficiency and Eco‐Friendly Nonfullerene Polymer Solar Cells Obtained by Balancing Molecular Weight and Solubility in Chlorinated Thiophene‐Based Polymer Backbones

(2019) Sung Jae Jeon et al.   Small

Evaporation‐Free Nonfullerene Flexible Organic Solar Cell Modules Manufactured by An All‐Solution Process

(2019) Yong Woon Han et al.   Advanced Energy Materials

Degenerately Hydrogen Doped Molybdenum Oxide Nanodisks for Ultrasensitive Plasmonic Biosensing

(2018) Bao Yue Zhang et al.   ADVANCED FUNCTIONAL MATERIALS

Printable MoO x Anode Interlayers for Organic Solar Cells

(2018) Qian Kang et al.   ADVANCED MATERIALS

Over 14% Efficiency in Polymer Solar Cells Enabled by a Chlorinated Polymer Donor

(2018) Shaoqing Zhang et al.   ADVANCED MATERIALS

Organic solar cells based on non-fullerene acceptors

(2018) Jianhui Hou et al.   NATURE MATERIALS

Next-generation organic photovoltaics based on non-fullerene acceptors

(2018) Pei Cheng et al.   Nature Photonics

Thermostable single-junction organic solar cells with a power conversion efficiency of 14.62%

(2018) Hui Li et al.   Science Bulletin

Non-fullerene acceptors for organic solar cells

(2018) Cenqi Yan et al.   Nature Reviews Materials

A Cost Analysis of Fully Solution-Processed ITO-Free Organic Solar Modules

(2018) Jie Guo et al.   Advanced Energy Materials

Ternary organic solar cells offer 14% power conversion efficiency

(2017) Zuo Xiao et al.   Science Bulletin

Implication of Fluorine Atom on Electronic Properties, Ordering Structures, and Photovoltaic Performance in Naphthobisthiadiazole-Based Semiconducting Polymers

(2016) Kazuaki Kawashima et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Semitransparent, non-fullerene and flexible all-plastic solar cells

(2016) Yifan Wang et al.   POLYMER

Roll-coating fabrication of flexible organic solar cells: comparison of fullerene and fullerene-free systems

(2016) Kuan Liu et al.   Journal of Materials Chemistry A

Flexible all-solution-processed all-plastic multijunction solar cells for powering electronic devices

(2016) Jinhui Tong et al.   Materials Horizons

Highly Efficient, Mechanically Flexible, Semi-Transparent Organic Solar Cells Doctor Bladed from Non-Halogenated Solvents

(2016) Jens Czolk et al.   Advanced Materials Technologies

Fully printed organic tandem solar cells using solution-processed silver nanowires and opaque silver as charge collecting electrodes

(2015) Fei Guo et al.   Energy & Environmental Science

Optical properties and conductivity of PEDOT:PSS films treated by polyethylenimine solution for organic solar cells

(2015) Zaifang Li et al.   ORGANIC ELECTRONICS

Roll-coating fabrication of ITO-free flexible solar cells based on a non-fullerene small molecule acceptor

(2015) Wenqing Liu et al.   RSC Advances

High efficiency, fully inkjet printed organic solar cells with freedom of design

(2015) T. M. Eggenhuisen et al.   Journal of Materials Chemistry A

Roll-Coated Fabrication of Fullerene-Free Organic Solar Cells with Improved Stability

(2015) Pei Cheng et al.   Advanced Science

Understanding Low Bandgap Polymer PTB7 and Optimizing Polymer Solar Cells Based on It

(2014) Luyao Lu et al.   ADVANCED MATERIALS

Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules

(2014) Thomas R. Andersen et al.   Energy & Environmental Science

All-Inkjet-Printed, All-Air-Processed Solar Cells

(2014) Sungjune Jung et al.   Advanced Energy Materials

Sol–gel synthesized, low-temperature processed, reduced molybdenum peroxides for organic optoelectronics applications

(2014) Antonios M. Douvas et al.   Journal of Materials Chemistry C

All-Solution-Processed, Ambient Method for ITO-Free, Roll-Coated Tandem Polymer Solar Cells using Solution-Processed Metal Films

(2014) Dechan Angmo et al.   Energy Technology

Synergistic Effect of Fluorination on Molecular Energy Level Modulation in Highly Efficient Photovoltaic Polymers

(2013) Maojie Zhang et al.   ADVANCED MATERIALS

Low-Temperature Solution-Processed Hydrogen Molybdenum and Vanadium Bronzes for an Efficient Hole-Transport Layer in Organic Electronics

(2013) Fengxian Xie et al.   ADVANCED MATERIALS

Fluorine Substituents Reduce Charge Recombination and Drive Structure and Morphology Development in Polymer Solar Cells

(2013) Andrew C. Stuart et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

ITO-Free and Fully Solution-Processed Semitransparent Organic Solar Cells with High Fill Factors

(2013) Fei Guo et al.   Advanced Energy Materials

Influence of a novel fluorosurfactant modified PEDOT:PSS hole transport layer on the performance of inverted organic solar cells

(2012) Fang Jeng Lim et al.   JOURNAL OF MATERIALS CHEMISTRY

Polymer solar cells

(2012) Gang Li et al.   Nature Photonics

Solution-Processed MoO3 Thin Films As a Hole-Injection Layer for Organic Solar Cells

(2011) Claudio Girotto et al.   ACS Applied Materials & Interfaces

Solution-Processed Organic Solar Cells

(2011) Christoph J. Brabec et al.   MRS BULLETIN

Electronic structure of anode interface with molybdenum oxide buffer layer

(2009) Kaname Kanai et al.   ORGANIC ELECTRONICS

Comparative Study on MoO3and HxMoO3Nanobelts: Structure and Electric Transport

(2008) Xiao Kai Hu et al.   CHEMISTRY OF MATERIALS

Hydrogen peroxide induced formation of peroxystannate nanoparticles

(2008) Sergey Sladkevich et al.   JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY

Fabrication and processing of polymer solar cells: A review of printing and coating techniques

(2008) Frederik C. Krebs   SOLAR ENERGY MATERIALS AND SOLAR CELLS