A coupled electrochemical-mechanical performance evaluation for safety design of lithium-ion batteries in electric vehicles: An integrated cell and system level approach

The studies on an integrated approach for the battery (cell level), battery pack (system level) and battery pack enclosure (system level) are nascent till date. The present work proposes a combined approach for studying the coupled electrochemical-mechanical performance of the battery (cell level), battery pack and enclosure (system level). In this context, five research problems are undertaken involving the design parameters for the performance evaluation of batteries. The first issue undertaken is battery performance under stress conditions and for that varying initial stress and real-time stresses were applied, and variation in the capacity of the battery packs was studied. Initial stress was found to be in negative relation with the battery capacity. For understanding the mechanical damage (leakage, deformation, etc.), characterization of the battery cell under impact loading was done by subjecting battery cells to different impact loads and impact analysis was done using six statistical features extracted from the impact force processed signal of each test, namely: peak value, mean value, variance, skewness, kurtosis and pulse width. The third issue regards the manufacturing defects in the cell, which can potentially lead to inconsistency of cells performance in a pack and thus lower its total cycle life. Support vector classification clustering methods were applied to form a battery pack with similar performing cells and performance of the pack was compared with industrial packs in which earlier one was found to be better. The fourth research challenge involved the mechanical performance parameters such as strength, deformation, and natural frequency, which, in addition to temperature, are also critical to battery pack safety in the event of impact and vibrations under driving conditions. ANSIS and NSGA-II based approaches were used to optimize the battery design and resultant device shown maximum deformation reduced by 22.2%, the value of minimum inherent frequency improved by 3.2% and the value of mass decreased by 11.6%. The fifth research problem highlighted how, due to the enormous production of electric vehicles, by 2020, there will be 250,000 tons of batteries that need to be recycled. A combined experimental-numerical framework has been thereby suggested to mitigate it. The study resulted in the formation of an online monitoring system and safety design of batteries at both cell and system level (pack and enclosure). (C) 2019 Elsevier Ltd. All rights reserved.