Digital Inkjet Printing of High‐Efficiency Large‐Area Nonfullerene Organic Solar Cells

A Highly Efficient Non-Fullerene Organic Solar Cell with a Fill Factor over 0.80 Enabled by a Fine-Tuned Hole-Transporting Layer

(2018) Zhong Zheng et al.   ADVANCED MATERIALS

Surpassing 10% Efficiency Benchmark for Nonfullerene Organic Solar Cells by Scalable Coating in Air from Single Nonhalogenated Solvent

(2018) Long Ye et al.   ADVANCED MATERIALS

P3HT: non-fullerene acceptor based large area, semi-transparent PV modules with power conversion efficiencies of 5%, processed by industrially scalable methods

(2018) S. Strohm et al.   Energy & Environmental Science

Robust nonfullerene solar cells approaching unity external quantum efficiency enabled by suppression of geminate recombination

(2018) Derya Baran et al.   Nature Communications

Progress in Poly (3-Hexylthiophene) Organic Solar Cells and the Influence of Its Molecular Weight on Device Performance

(2018) Andrew Wadsworth et al.   Advanced Energy Materials

The Physics of Small Molecule Acceptors for Efficient and Stable Bulk Heterojunction Solar Cells

(2018) Nicola Gasparini et al.   Advanced Energy Materials

A New Nonfullerene Acceptor with Near Infrared Absorption for High Performance Ternary-Blend Organic Solar Cells with Efficiency over 13%

(2018) Huan-Huan Gao et al.   Advanced Science

Non-Fullerene-Based Printed Organic Photodiodes with High Responsivity and Megahertz Detection Speed

(2018) Noah Strobel et al.   ACS Applied Materials & Interfaces

Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells

(2017) Wenchao Zhao et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Burn-in Free Nonfullerene-Based Organic Solar Cells

(2017) Nicola Gasparini et al.   Advanced Energy Materials

Flexible and Semitransparent Organic Solar Cells

(2017) Yaowen Li et al.   Advanced Energy Materials

Highly Efficient and Reproducible Nonfullerene Solar Cells from Hydrocarbon Solvents

(2017) Andrew Wadsworth et al.   ACS Energy Letters

Reduced voltage losses yield 10% efficient fullerene free organic solar cells with >1 V open circuit voltages

(2016) D. Baran et al.   Energy & Environmental Science

Reducing the efficiency–stability–cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells

(2016) Derya Baran et al.   NATURE MATERIALS

Fabrication of polymer solar cells from organic nanoparticle dispersions by doctor blading or ink-jet printing

(2016) Sivaramakrishnan Sankaran et al.   ORGANIC ELECTRONICS

High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor

(2016) Sarah Holliday et al.   Nature Communications

Digital fabrication of organic solar cells by Inkjet printing using non-halogenated solvents

(2015) T.M. Eggenhuisen et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Green-Solvent-Processed All-Polymer Solar Cells Containing a Perylene Diimide-Based Acceptor with an Efficiency over 6.5%

(2015) Sunsun Li et al.   Advanced Energy Materials

High efficiency, fully inkjet printed organic solar cells with freedom of design

(2015) T. M. Eggenhuisen et al.   Journal of Materials Chemistry A

Roll-Coated Fabrication of Fullerene-Free Organic Solar Cells with Improved Stability

(2015) Pei Cheng et al.   Advanced Science

Morphology Evolution in High-Performance Polymer Solar Cells Processed from Nonhalogenated Solvent

(2015) Wanzhu Cai et al.   Advanced Science

Integrated Molecular, Interfacial, and Device Engineering towards High-Performance Non-Fullerene Based Organic Solar Cells

(2014) Yue Zang et al.   ADVANCED MATERIALS

Inkjet printing processing conditions for bulk-heterojunction solar cells using two high-performing conjugated polymer donors

(2014) Felix Hermerschmidt et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

All-Inkjet-Printed, All-Air-Processed Solar Cells

(2014) Sungjune Jung et al.   Advanced Energy Materials

Non-halogenated solvents for environmentally friendly processing of high-performance bulk-heterojunction polymer solar cells

(2013) Chu-Chen Chueh et al.   Energy & Environmental Science

From lab to fab: how must the polymer solar cell materials design change? – an industrial perspective

(2013) Riccardo Po et al.   Energy & Environmental Science

Inkjet-printed polymer–fullerene blends for organic electronic applications

(2012) M. Neophytou et al.   MICROELECTRONIC ENGINEERING

Inkjet printed solar cell active layers prepared from chlorine-free solvent systems

(2012) Alexander Lange et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Wolfgang von Ohnesorge

(2011) Gareth H. McKinley et al.   PHYSICS OF FLUIDS

Accounting for Interference, Scattering, and Electrode Absorption to Make Accurate Internal Quantum Efficiency Measurements in Organic and Other Thin Solar Cells

(2010) George F. Burkhard et al.   ADVANCED MATERIALS

Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution

(2010) Brian Derby   Annual Review of Materials Research

High efficiency polymer solar cells via sequential inkjet-printing of PEDOT:PSS and P3HT:PCBM inks with additives

(2010) Seung Hun Eom et al.   ORGANIC ELECTRONICS

Inkjet Printing-Process and Its Applications

(2009) Madhusudan Singh et al.   ADVANCED MATERIALS

On the effect of poly(3-hexylthiophene) regioregularity on inkjet printed organic solar cells

(2009) Claudia N. Hoth et al.   JOURNAL OF MATERIALS CHEMISTRY

Polymer based organic solar cells using ink-jet printed active layers

(2008) T. Aernouts et al.   APPLIED PHYSICS LETTERS

Inkjet-Printed Line Morphologies and Temperature Control of the Coffee Ring Effect

(2008) Dan Soltman et al.   LANGMUIR

Printing Highly Efficient Organic Solar Cells

(2008) Claudia N. Hoth et al.   NANO LETTERS