Additive manufacturing of ultrafine-grained austenitic stainless steel matrix composite via vanadium carbide reinforcement addition and selective laser melting: Formation mechanism and strengthening effect

Selective Laser Melting (SLM) was applied to Additive Manufacturing (AM) of carbide ceramic particulate reinforced 316 L stainless steel matrix composites. The dense and ultrafine-grained Austenite matrix with uniformly distributed and nano-sized VCx particulate reinforcements were obtained according to the tailored SLM process parameters and 3 wt% submicron-sized V8C7 ceramic particle addition into 97 wt% 316 L powder via ball-milling treatment. The influences of SLM process parameters on the SLM printed composites in terms of density, surface roughness, phase constitution, microstructure characteristics and mechanical tensile performance were investigated in detail, comparing with the SLM printed 316 L in absence of vanadium carbides. Based on the electron back-scattered diffraction analyses, the number of grains with grain size less than 2 mu m accounted for more than 90% in the printed composites. The formation mechanisms of the printed composites with their unique microstructure characteristics were elaborated. The room-temperature ultimate tensile strength of the printed 316 L matrix composites achieved higher than 1400 MPa, which was more than twice as high as that of printed 316 L stainless steel. It contributed substantially to the strengthening effect on the printed composites of the ultrafast laser-induced and highly nonequilibrium melting-solidification nature of SLM process, the dispersed carbide ceramic particulate reinforcements, the nanoscaled nucleation sites of VCx. for the equiaxed Austenite grains, and the inhibition against Austenite matrix growth by particulate dispersedly distributed along Austenite grain boundaries.