Occurrence and removal efficiencies of benzotriazoles and benzothiazoles in a wastewater treatment plant in Greece

Despite the widespread use of benzotriazoles and benzothiazoles and the occurrence of these compounds in wastewater treatment plants (WWTPs), no earlier study has comprehensively examined their fate in WWTPs. In this study, an integrated liquid chromatography-tandem mass spectrometry (LC-ESI(+)MS/MS) method was developed and validated for simultaneous determination of four benzotriazoles and four benzothiazoles in dissolved and particulate phases of wastewater (raw and treated), and in dewatered sewage sludge. The target benzotriazoles (BTRs) were 1H-benzotriazole, 1-hydroxy-benzotriazole, tolyltriazole, and xylyltriazole (or 5,6-dimethyl-1H-benzotriazole), and the target benzothiazoles (BTHs) were benzothiazole, 2-hydroxy-benzothiazole, 2-methylthio-benzothiazole, and 2-amino-benzothiazole. The limits of detection ranged from 0.08 (2-methylthio-benzothiazole) to 17 ng/L (benzothiazole) for dissolved phase samples, and from 0.04 (2-methylthio-benzothiazole) to 13 ng/g dry weight (dw) (benzothiazole) for particular matter and sludge samples. The method was applied in the analysis of wastewater and sludge samples from the WWTP in Athens, Greece. All target chemicals were detected in wastewater samples, and in some cases the concentrations were significant, on the order of a few mu g/L. In sludge samples, benzothiazole and tolyltriazole were present at the highest concentrations (174 and 116 ng/g dw, respectively). For benzotriazole and tolyltriazole, the removal efficiency was below 68%, and for benzothiazoles, the removal efficiency was greater than 64% in the activated sludge treatment process. Both BTRs and BTHs showed low solid-liquid distribution coefficients. (C) 2013 Elsevier B.V. All rights reserved.