Preparation and Characterization of Poly(styrene-b-butadiene-b-styrene)/Montmorillonite Nanocomposites

With some polymerizable small molecules grafting onto the montmorillonite surface, we disposed the clay through in-situ emulsion polymerization, and the structure of the modified montmorillonites were studied through Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The nanocomposites of poly(styrene-b-butadione-b-styrene) (SBS)/montmorillonite with excellent mechanical properties were prepared by mixing SBS and the modified montmorillonite on the double rollers at 150 degrees C. The exfoliation of the layered silicates was confirmed by XRD analysis and transmission electron microscopy (TEM) observation. After mechanical kneading of the molten nanocomposites, the exfoliation structure of the silicates is still stable for polystyrene macromolecules grafting onto the silicates. Upon the addition of the modified montmorillonite, the tensile strength, elongation at break and tear strength of the nanocomposites increased from 22.6 MPa to 31.1 MPa, from 608% to 948%, from 45.32 N/mm to 55.27 N/mm, respectively. The low-temperature point of glass-transition temperature (T-g) of the products was about -77 degrees C, almost constant, but the high-temperature point increased from 97 degrees C to 106 degrees C. In addition, the nanocomposites of SBS and modified montmorillonites showed good resistance to thermal oxidation and aging. POLYM. COMPOS., 30:281-287, 2009. (C) 2008 Society of Plastics Engineers