Article
Electrochemistry
Di Zhang, Sidong Zhang, Yanyan Fang, Dongmei Xie, Xiaowen Zhou, Yuan Lin
Summary: Introducing bifunctional linkers between TiO2 electrodes and quantum dots was an effective approach for the preparation of quantum dot-sensitized solar cells. Three types of linkers were studied, with phenyl MBA-TiO2 electrodes achieving the highest Cd content and PCE. The modified TiO2 electrodes showed lower electron recombination rates and higher efficiency, demonstrating the importance of linker selection for QDSCs design and optimization.
ELECTROCHIMICA ACTA
(2021)
Article
Chemistry, Physical
Miguel Albaladejo-Siguan, David Becker-Koch, Elizabeth C. Baird, Yvonne J. Hofstetter, Ben P. Carwithen, Anton Kirch, Sebastian Reineke, Artem A. Bakulin, Fabian Paulus, Yana Vaynzof
Summary: Light-harvesting devices made from lead sulfide quantum dot absorbers have promising applications in third-generation photovoltaics. Passivating the quantum dot surfaces and managing the excess lead halide can improve device performance and stability.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
D. Vinoth Pandi, V. Saraswathi, M. R. Venkatraman, N. Muthukumarasamy, S. Agilan, D. Velauthapillai, K. Brindhadevi, A. Pugazhendhi
Summary: PbS quantum dots and PbS quantum dots-sensitized ZnO nanostructures with rod-like shape were successfully synthesized. The prepared PbS quantum dots exhibited significant visible light absorption, and the light absorption of PbS quantum dots-sensitized ZnO nanorods was higher than that of bare ZnO nanorods. The uniform development of rod-like ZnO nanostructures with deposition of PbS quantum dots on the surface was observed from electron microscope images. The solar cells made using PbS quantum dots-sensitized ZnO nanorods achieved a power conversion efficiency of 1.2%.
MATERIALS TODAY CHEMISTRY
(2023)
Article
Energy & Fuels
Tamal Dey, Arup Ghorai, Soumen Das, Samit K. Ray
Summary: The choice of solvent used in the synthesis of nitrogen-doped graphene quantum dots (N-GQDs) significantly affects the photovoltaic performance of quantum dot sensitized solar cells (QDSSC). Switching to aprotic solvent DMF enhances nitrogen units in the graphene quantum dots framework, improving carrier density and transport properties, and resulting in better photovoltaic performance for QDSSC.
Review
Chemistry, Physical
Akash S. Rasal, Sudesh Yadav, Anil A. Kashale, Ali Altaee, Jia-Yaw Chang
Summary: This review discusses the factors influencing the performance stability of QDSSCs and provides insights into the mechanisms causing degraded performances. It also presents cutting-edge strategies for improving the overall performance stability of QDSSCs.
Article
Energy & Fuels
Roopakala Kottayi, Vignesh Murugadoss, Pratheep Panneerselvam, Ramadasse Sittaramane, Subramania Angaiah
Summary: Cu2AgInS2Se2 alloyed quantum dots were synthesized using a hot injection method, with their structure, optical properties, and composition confirmed through various analyses. The sensitized solar cell using these quantum dots exhibited higher photoconversion efficiency compared to other quantum dots, showcasing their potential for photovoltaic applications.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH
(2021)
Article
Nanoscience & Nanotechnology
Roopakala Kottayi, Ilangovan Veerappan, Ramadasse Sittaramane
Summary: This study synthesized Ag-Zn-Ga-S-Se alloyed quantum dots (QDs) by colloidal hot injection and characterized their properties. The results showed that the synthesized QDs have high light absorption ability and can be used as sensitizers in solar cells, achieving a high photoconversion efficiency.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY
(2022)
Article
Energy & Fuels
Jinpeng Yang, Chunyan Wu, Tengzuo Huang, Fayin Yu, Shuo Ding, Lei Qian, Tao Sun, Chaoyu Xiang
Summary: The impacts of doping the organic hole transport layer (HTL) PTB7-Th with lithium bis(trifluoromethanesulfonimide) (LiTSFI) on the performance of quantum dot solar cells were investigated, and a notable enhancement in fill factor was observed. Doping with LiTFSI significantly deepened the Fermi level of the HTL, improving charge separation ability and conductivity. By optimizing doping conditions, the doped device achieved a maximum power conversion efficiency of 12.68%. This doping strategy of organic HTL promotes the development of lead sulfide quantum dot solar cell techniques.
Article
Chemistry, Multidisciplinary
Ciyu Ge, Erqi Yang, Xinzhao Zhao, Can Yuan, Sen Li, Chong Dong, Yingfeng Ruan, Liuchong Fu, Yuming He, XiangBin Zeng, Haisheng Song, Bin Hu, Chao Chen, Jiang Tang
Summary: This study proposes a simple method to fabricate window materials for infrared solar cells using hydrogen-doped indium oxide films prepared by room temperature magnetron sputtering. The low-temperature annealed conductive electrodes exhibit high mobility and infrared transmittance, improving the performance of the solar cells.
Article
Chemistry, Multidisciplinary
Mingyu Li, Shiwu Chen, Xinzhao Zhao, Kao Xiong, Bo Wang, Usman Ali Shah, Liang Gao, Xinzheng Lan, Jianbing Zhang, Hsien-Yi Hsu, Jiang Tang, Haisheng Song
Summary: Infrared solar cells incorporating PbS colloidal quantum dots show high efficiency and stability under full-spectrum illumination, with novel energy-level aligned ZnO thin film and hybrid ligand passivation strategies boosting the performance. The development of matched charge extraction and QD passivation approaches is expected to advance QD optoelectronics technology.
Article
Green & Sustainable Science & Technology
Yaling Liu, John Keil, Vivian E. Ferry, Uwe R. Kortshagen
Summary: Greenhouses provide a controlled environment for plant growth and offer resilience to droughts and extreme weather. Luminescent solar concentrators (LSCs) have the potential to reduce greenhouse energy demand by generating clean electricity and transmitting enough light for plant growth.
ADVANCED SUSTAINABLE SYSTEMS
(2023)
Article
Chemistry, Multidisciplinary
Cong Zhang, Xingtian Yin, Guojiang Qian, Zi Sang, Yawei Yang, Wenxiu Que
Summary: This article presents a solution-phase ligand exchange-based PbS-I quantum-dot-sensitized InGaZnO hybrid phototransistor with excellent air stability and tunable operation mode to meet different detection requirements.
ADVANCED FUNCTIONAL MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Junwei Liu, Jiawei Qiao, Kangkang Zhou, Jingjing Wang, Ruohua Gui, Kaihu Xian, Mengyuan Gao, Hang Yin, Xiaotao Hao, Zhihua Zhou, Long Ye
Summary: This study proposes a facile polymer blending strategy for directly synthesized CQD/polymer hybrid solar cells with a champion efficiency of 13%, leveraging optimized aggregation behaviors of conjugated polymer blends. The strategy also provides a dilution effect for photovoltaic polymers with excessively strong aggregation tendency, resulting in fast carrier transport and high photovoltaic performance. The relationships between polymer morphology, carrier transport, and photovoltaic performance are established to advance the progress of CQD/polymer hybrid solar cells.
Article
Nanoscience & Nanotechnology
David Becker-Koch, Miguel Albaladejo-Siguan, Yvonne J. Hofstetter, Olga Solomeshch, Darius Pohl, Bernd Rellinghaus, Nir Tessler, Yana Vaynzof
Summary: Efficiency of PbS quantum dot solar cells has increased, with potential for industrial applications. The use of organic layers like PTAA can improve efficiency while avoiding stability issues associated with EDT and MoO3 layers.
ACS APPLIED MATERIALS & INTERFACES
(2021)
Article
Engineering, Multidisciplinary
Akash S. Rasal, Ting-Wei Chang, Chiranjeevi Korupalli, Jia-Yaw Chang
Summary: This study successfully synthesized Cu2-xSySe1-y alloyed semiconductors film with tunable crystal structures, compositions, and morphologies as counter electrode materials, demonstrating excellent stability and high conversion efficiency in photovoltaic applications.
COMPOSITES PART B-ENGINEERING
(2022)
Article
Chemistry, Physical
Sergey Yu. Ketkov, Sheng-Yuan Tzeng, Elena A. Rychagova, Anton N. Lukoyanov, Wen-Bih Tzeng
Summary: Metallocenes, including methylcobaltocene, play important roles in various fields of chemistry. The ionization energy and vibrational structure of (Cp ')(Cp)Co can be influenced by introducing methyl substituents. The mass-analyzed threshold ionization spectrum and DFT calculations provide accurate information about the properties and transformations of (Cp ')(Cp)Co.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2024)
Review
Chemistry, Physical
Qifeng Mu, Jian Hu
Summary: Polymer mechanochemistry has experienced a renaissance due to the rapid development of mechanophores and principles governing mechanochemical transduction or material strengthening. It has not only provided fundamental guidelines for converting mechanical energy into chemical output, but also found applications in engineering and smart devices.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2024)
Article
Chemistry, Physical
Da Hye Yang, Francesco Ricci, Fredrik L. Nordstrom, Na Li
Summary: Through systematic evaluation of the oiling-out behavior of procaine, we identified both stable and metastable liquid-liquid phase separation, and established phase diagrams to assist in rational selection of crystallization strategies.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2024)
Article
Chemistry, Physical
Vikki Anand Varma, Simmie Jaglan, Mohd Yasir Khan, Sujin B. Babu
Summary: Designing engineering structures like nanocages, shells, and containers through self-assembly of colloids is a challenging problem. This work proposes a simple model for the subunit, which leads to the formation of monodispersed spherical cages or containers. The model with only one control parameter can be used to design cages with the desired radius.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2024)
Article
Chemistry, Physical
Hainan Jiang, Yaolong He, Xiaolin Li, Zhiyao Jin, Huijie Yu, Dawei Li
Summary: The cycling lifespan and coulombic efficiency of lithium-ion batteries are crucial for high C-rate applications. The Li-ion concentration plays a crucial role in determining the mechanical integrity and structural stability of electrodes. This study focuses on graphite as the working electrode and establishes an experimental system to investigate the mechanical properties of composite graphite electrode at different C-rates. Considering the effect of Li-ion concentration in stress analysis is found to be significant.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2024)
Article
Chemistry, Physical
Zhiye Wang, Yunchuan Li, Mingjun Sun
Summary: This study investigates the influence of intramolecular pi-pi interactions on the electronic transport capabilities of molecules. By designing and analyzing three pi-conjugated molecules, the researchers observe that different pi-conjugated structures have varying effects on electron transport. The findings provide a theoretical foundation for designing single-molecule electronic devices with multiple electron channels based on intramolecular pi-pi interactions.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2024)
Article
Chemistry, Physical
Yuandong Xu, Haoyang Feng, Chaoyang Dong, Yuqing Yang, Meng Zhou, Yajun Wei, Hui Guo, Yaqing Wei, Jishan Su, Yingying Ben, Xia Zhang
Summary: Hollow MoS2 cubes and spheres were successfully synthesized using a one-step hydrothermal method with the hard template method. The hollow MoS2 cubes exhibited higher specific capacitance and energy density compared to the hollow MoS2 spheres. The symmetrical supercapacitors assembled with these hollow structures showed good performance and high capacity retention after multiple cycles. These findings suggest that controlling the pore structure and surface characteristics of MoS2 is crucial for enhancing its electrochemical properties.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2024)
Article
Chemistry, Physical
Ainhoa Oliden-Sanchez, Rebeca Sola-Llano, Joaquin Perez-Pariente, Luis Gomez-Hortiguela, Virginia Martinez-Martinez
Summary: The combination of photoactive molecules and inorganic structures is important for the development of advanced materials in optics. In this study, bulky dyes were successfully encapsulated in a zeolitic framework, resulting in emission throughout the visible spectrum.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2024)
Article
Chemistry, Physical
Miaomiao Zhang, Cunyuan Pei, Qiqi Xiang, Lintao Liu, Zhongxu Dai, Huijuan Ma, Shibing Ni
Summary: The design of a solid electrolyte interphase (SEI) plays a crucial role in improving the electrochemical performance of anode materials. In this study, lithium difluoro(oxalate)borate (LiDFOB) is used as an electrolyte additive to form a protective SEI film on Li3VO4 (LVO) anodes. The addition of LiDFOB results in a dense, uniform, stable, and LiF-richer SEI, which enhances the Li-ion storage kinetics. The generated SEI also prevents further decomposition of the electrolyte and maintains the morphology of LVO anodes during charge/discharge processes. This work demonstrates the effectiveness of LiDFOB as a multi-functional additive for LiPF6 electrolytes and provides insights into SEI construction for high-performance LVO anodes.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2024)
Article
Chemistry, Physical
B. V. Andryushechkin, T. V. Pavlova, V. M. Shevlyuga
Summary: The atomic structure of the Ag(111)-p(4 x 4)-O phase was reexamined and two phases with the same periodicity were discovered. It was demonstrated that the accepted Ag6 model is incompatible with high-resolution oxygen-sensitive STM images.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2024)
Article
Chemistry, Physical
S. L. Romo-Avila, D. Marquez-Ruiz, R. A. Guirado-Lopez
Summary: In this study, we used density functional theory (DFT) calculations to investigate the interaction between model graphene oxide (GO) nanostructures and chlorine monoxide ClO. We aimed to understand the role of this highly oxidizing species in breaking C-C bonds and forming significant holes on GO sheets. Our results showed that C-C bonds in a single graphene oxide sheet can be broken through a simple mechanism involving the dissociation of two chemically attached ClO molecules. The formation of carbonyl groups and holes on the GO surface was also observed. This study provides important insights into the degradation of carbon nanotubes and the stability of GO during the myeloperoxidase (MPO) catalytic cycle.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2024)
Article
Chemistry, Physical
Alberto Garcia-Fernandez, Birgit Kammlander, Stefania Riva, Hakan Rensmo, Ute B. Cappel
Summary: In this study, the X-ray stability of five different lead halide perovskite compositions (MAPbI3, MAPbCl3, MAPbBr3, FAPbBr3, CsPbBr3) was investigated using photoelectron spectroscopy. Different degradation mechanisms and resistance to X-ray were observed depending on the crystal composition. Overall, perovskite compositions based on the MA+ cation were found to be less stable than those based on FA+ or Cs+. Metallic lead formation was most easily observed in the chloride perovskite, followed by bromide, and very little in MAPbI3. Multiple degradation processes were identified for the bromide compositions, including ion migration, formation of volatile and solid products, as well as metallic lead. CsBr was formed as a solid degradation product on the surface of CsPbBr3.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2024)
Article
Chemistry, Physical
Timofei Rostilov, Vadim Ziborov, Alexander Dolgoborodov, Mikhail Kuskov
Summary: The shock-loading behavior of nanomaterials is investigated in this study. It is found that shock compaction waves exhibit a distinct two-step structure, with the formation of faster precursor waves that travel ahead of the main compaction waves. The complexity of the shock Hugoniot curve of the tested nanomaterial is described, and the effect of initial porosity on the compressed states is demonstrated.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2024)
Article
Chemistry, Physical
Sergey S. Nikitin, Alexander D. Koryakov, Elizaveta A. Antipinskaya, Alexey A. Markov, Mikhail V. Patrakeev
Summary: The stability of La1/3Sr2/3Fe1-xMnxO3-delta, a perovskite-type oxide, under reducing conditions is dependent on the manganese content. Increasing the manganese content leads to a decrease in stability. The behavior of iron and manganese in the oxide shows distinct differences, which can be attributed to the difference in the enthalpy of oxidation reactions. Additionally, the change in the La/Sr ratio affects the concentration of iron and manganese ions.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2024)
Article
Chemistry, Physical
Mosayeb Naseri, Shirin Amirian, Mehrdad Faraji, Mohammad Abdur Rashid, Maicon Pierre Lourenco, Venkataraman Thangadurai, D. R. Salahub
Summary: Inspired by the successful transfer of freestanding ultrathin films of SrTiO3 and BiFeO3, this study assessed the structural stability and investigated the electronic, optical, and thermoelectric properties of a group of two-dimensional perovskite-type materials called perovskenes. The findings revealed that these materials are wide bandgap semiconductors with potential application in UV shielding. Moreover, they exhibit better electrical and thermal conductivity at high temperatures, enabling efficient power generation in thermoelectric devices.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2024)