Influence of the non-linearity of fabric tensile behavior for preforming modeling of a woven flax fabric
出版年份 2015 全文链接
标题
Influence of the non-linearity of fabric tensile behavior for preforming modeling of a woven flax fabric
作者
关键词
-
出版物
TEXTILE RESEARCH JOURNAL
Volume 86, Issue 6, Pages 604-617
出版商
SAGE Publications
发表日期
2015-07-20
DOI
10.1177/0040517515595030
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Nonlinear tensile behaviour of elementary hemp fibres. Part II: Modelling using an anisotropic viscoelastic constitutive law in a material rotating frame
- (2015) Frédérique Trivaudey et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Shear behaviour of architectural fabrics subjected to biaxial tensile loads
- (2014) A.G. Colman et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Characterisation of the shear–tension coupling of carbon-fibre fabric under controlled membrane tensions for precise simulative predictions of industrial preforming processes
- (2014) Farbod Nosrat-Nezami et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Complex shape forming of flax woven fabrics: Design of specific blank-holder shapes to prevent defects
- (2014) Emilie Capelle et al. COMPOSITES PART B-ENGINEERING
- Determination of the optimal flax fibre preparation for use in unidirectional flax–epoxy composites
- (2014) J Baets et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Potentiality of utilising natural textile materials for engineering composites applications
- (2014) Mohd Iqbal Misnon et al. MATERIALS & DESIGN
- Tensile properties of elementary fibres of flax and glass: Analysis of reproducibility and scattering
- (2014) Anaële Lefeuvre et al. MATERIALS LETTERS
- Experimental Investigation About Stamping Behaviour of 3D Warp Interlock Composite Preforms
- (2013) Clément Dufour et al. APPLIED COMPOSITE MATERIALS
- Complex shape forming of a flax woven fabric; analysis of the tow buckling and misalignment defect
- (2013) P. Ouagne et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Meso modelling for composite preform shaping – Simulation of the loss of cohesion of the woven fibre network
- (2013) S. Gatouillat et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Green composites: A review of material attributes and complementary applications
- (2013) Michael P.M. Dicker et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- A simple anisotropic hyperelastic constitutive model for textile fabrics with application to forming simulation
- (2013) Xiongqi Peng et al. COMPOSITES PART B-ENGINEERING
- Tensile properties of chemically treated hemp fibres as reinforcement for composites
- (2013) M.M. Kabir et al. COMPOSITES PART B-ENGINEERING
- Numerical study of the influence of structural and mechanical parameters on the tensile mechanical behaviour of flax fibres
- (2013) Anthony Thuault et al. Journal of Industrial Textiles
- Flame retardancy and mechanical properties of flax reinforced woven for composite applications
- (2013) Sophie Duquesne et al. Journal of Industrial Textiles
- Developing plant fibre composites for structural applications by optimising composite parameters: a critical review
- (2013) Darshil U. Shah JOURNAL OF MATERIALS SCIENCE
- A study of the tensile behaviour of flax tows and their potential for composite processing
- (2013) J. Moothoo et al. MATERIALS & DESIGN
- In situ observations of microscale damage evolution in unidirectional natural fibre composites
- (2012) Morten Rask et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Experimental and computational composite textile reinforcement forming: A review
- (2012) Thomas Gereke et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- A review of bast fibres and their composites: Part 3 – Modelling
- (2012) John Summerscales et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Nonlinear tensile behaviour of elementary hemp fibres. Part I: Investigation of the possible origins using repeated progressive loading with in situ microscopic observations
- (2012) Vincent Placet et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Continuous measurement of fiber reinforcement permeability in the thickness direction: Experimental technique and validation
- (2012) Pierre Ouagne et al. COMPOSITES PART B-ENGINEERING
- Hyperelastic model for large deformation analyses of 3D interlock composite preforms
- (2012) A. Charmetant et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Mechanical characterisation of flax-based woven fabrics and in situ measurements of tow tensile strain during the shape forming
- (2012) P Ouagne et al. JOURNAL OF COMPOSITE MATERIALS
- Analysis of the stress components in a textile composite reinforcement
- (2012) Gilles Hivet et al. JOURNAL OF COMPOSITE MATERIALS
- Gas transport in fibrous media: Application to in-plane permeability measurement using transient flow
- (2012) Y Hou et al. JOURNAL OF COMPOSITE MATERIALS
- Modelling the effect of yarn twist on the tensile strength of unidirectional plant fibre yarn composites
- (2012) Darshil U Shah et al. JOURNAL OF COMPOSITE MATERIALS
- Influence of distribution of yarn interlacement on uniaxial tensile properties of woven fabrics
- (2012) S. Mishra JOURNAL OF THE TEXTILE INSTITUTE
- Biocomposites reinforced with natural fibers: 2000–2010
- (2012) Omar Faruk et al. PROGRESS IN POLYMER SCIENCE
- Experimental and numerical analyses of textile reinforcement forming of a tetrahedral shape
- (2011) S. Allaoui et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Experimental determination of the permeability of textiles: A benchmark exercise
- (2011) R. Arbter et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Critical review of recent publications on use of natural composites in infrastructure
- (2011) David B. Dittenber et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Hyperelastic modelling for mesoscopic analyses of composite reinforcements
- (2011) A. Charmetant et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses
- (2011) P. Boisse et al. COMPOSITES SCIENCE AND TECHNOLOGY
- The effect of fabric and fiber tow shear on dual scale flow and fiber bundle saturation during liquid molding of textile composites
- (2011) Joseph Walther et al. International Journal of Material Forming
- A review of bast fibres and their composites. Part 2 – Composites
- (2010) John Summerscales et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- A review of bast fibres and their composites. Part 1 – Fibres as reinforcements
- (2010) John Summerscales et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Experimental investigation of formability of commingled woven composite preform in stamping operation
- (2010) B. Zhu et al. COMPOSITES PART B-ENGINEERING
- Compression and Relaxation Behavior of Dry Fiber Preforms for Resin Transfer Molding
- (2010) Seung Hwan Lee et al. JOURNAL OF COMPOSITE MATERIALS
- Mechanical Properties of Flax Fibers and of the Derived Unidirectional Composites
- (2010) Karine Charlet et al. JOURNAL OF COMPOSITE MATERIALS
- Continuous transverse permeability of fibrous media
- (2009) P. Ouagne et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- A Hyperelastic Approach for Composite Reinforcement Large Deformation Analysis
- (2009) Y. Aimène et al. JOURNAL OF COMPOSITE MATERIALS
- Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behaviour. Application to the double dome benchmark
- (2009) M.A. Khan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Hypoelastic, hyperelastic, discrete and semi-discrete approaches for textile composite reinforcement forming
- (2009) Philippe Boisse et al. International Journal of Material Forming
- Discrete mesoscopic modeling for the simulation of woven-fabric reinforcement forming
- (2009) David Jauffrès et al. International Journal of Material Forming
- Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results
- (2008) J. Cao et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started