Effects of Particle Diameter and Coke Layer Thickness on Solid Flow and Stress Distribution in BF by 3D Discrete Element Method

Development of New Charging Technique for Mixing Coke in Ore Layer at Blast Furnace with Center Feed Type Bell-less Top

(2017) Yusuke Kashihara et al.   ISIJ INTERNATIONAL

Evaluating Effect of Coke Layer Thickness on Permeability by Pressure Drop Estimation Model

(2017) Kazuhira Ichikawa et al.   ISIJ INTERNATIONAL

CFD-DEM simulation of raceway formation in an ironmaking blast furnace

(2017) Zhen Miao et al.   POWDER TECHNOLOGY

DEM-based virtual experimental blast furnace: A quasi-steady state model

(2017) Qinfu Hou et al.   POWDER TECHNOLOGY

Effect of Unconsumed Mixed Small Coke on Permeability in Lower Part of Blast Furnace

(2015) Yusuke Kashihara et al.   ISIJ INTERNATIONAL

Analysis of Powder Motion in a Packed Bed of Blast Furnace Using the Discrete Element Method

(2015) Shin Kikuchi et al.   ISIJ INTERNATIONAL

Influence of Shape of Cohesive Zone on Gas Flow and Permeability in the Blast Furnace Analyzed by DEM-CFD Model

(2015) Shigeru Ueda et al.   ISIJ INTERNATIONAL

Perspective on Progressive Development of Oxygen Blast Furnace for Energy Saving

(2015) Koichi Takahashi et al.   ISIJ INTERNATIONAL

Carburization, Melting and Dripping of Iron through Coke Bed

(2015) Minsoo Shin et al.   ISIJ INTERNATIONAL

Predictcion of Next-Generation Ironmaking Process Based on Oxygen Blast Furnace Suitable for CO2 Mitigation and Energy Flexibility

(2015) Michitaka Sato et al.   ISIJ INTERNATIONAL

Effect of DEM Parameters on the Simulated Inter-particle Percolation of Pellets into Coke during Burden Descent in the Blast Furnace

(2015) Yaowei Yu et al.   ISIJ INTERNATIONAL

CFD modeling of multiphase reacting flow in blast furnace shaft with layered burden

(2014) Dong Fu et al.   APPLIED THERMAL ENGINEERING

Numerical Analysis of Carbon Monoxide–Hydrogen Gas Reduction of Iron Ore in a Packed Bed by an Euler–Lagrange Approach

(2014) Shungo Natsui et al.   METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

DEM-CFD Model Considering Softening Behavior of Ore Particles in Cohesive Zone and Gas Flow Analysis at Low Coke Rate in Blast Furnace

(2012) Hiroyuki Kurosawa et al.   ISIJ INTERNATIONAL

Simulation of Blast Furnace Operation with Intensive Hydrogen Injection

(2012) Hiroshi Nogami et al.   ISIJ INTERNATIONAL

Evaluation of Coke Mixed Charging Based on Packed Bed Structure and Gas Permeability Changes in Blast Furnace by DEM-CFD Model

(2012) Shouhei Matsuhashi et al.   ISIJ INTERNATIONAL

Kinetics of Carbon Dissolution of Coke in Molten Iron

(2012) Dongik Jang et al.   METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

In-Situ observation of the carburization of solid iron by graphite

(2012) Minsoo Shin et al.   METALS AND MATERIALS INTERNATIONAL

Penetration Effect of Injected Gas at Shaft Gas Injection in Blast Furnace Analyzed by Hybrid Model of DEM-CFD

(2011) Shungo Natsui et al.   ISIJ INTERNATIONAL

Inter-particle Percolation Segregation during Burden Descent in the Blast Furnace

(2011) Yaowei Yu et al.   ISIJ INTERNATIONAL

Dynamic Analysis of Gas and Solid Flows in Blast Furnace with Shaft Gas Injection by Hybrid Model of DEM-CFD

(2011) Shungo Natsui et al.   ISIJ INTERNATIONAL

Simultaneous Three-dimensional Analysis of Gas–Solid Flow in Blast Furnace by Combining Discrete Element Method and Computational Fluid Dynamics

(2011) Shungo Natsui et al.   ISIJ INTERNATIONAL

Influence of Profile of Blast Furnace on Motion and Stress of Burden by 3D-DEM

(2011) Jian-liang ZHANG et al.   JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL

Mathematical modeling of the burden distribution in the blast furnace shaft

(2011) Jong-In Park et al.   METALS AND MATERIALS INTERNATIONAL

Discrete Element Method-Computational Fluid Dynamic Simulation of the Materials Flow in an Iron-making Blast Furnace

(2010) Allert Tjipke Adema et al.   ISIJ INTERNATIONAL

Large Scale Simulation of Coke and Iron Ore Particle Motions and Air Flow in Actual Blast Furnace

(2010) Shinichi Yuu et al.   ISIJ INTERNATIONAL

Influence of Blast Furnace Inner Volume on Solid Flow and Stress Distribution by Three Dimensional Discrete Element Method

(2010) Zhengyun Fan et al.   ISIJ INTERNATIONAL

Transient Behavior of Burden Descending and Influence of Cohesive Zone Shape on Solid Flow and Stress Distribution in Blast Furnace by Discrete Element Method

(2010) Zhengyun Fan et al.   ISIJ INTERNATIONAL

Characteristics of Solid Flow and Stress Distribution Including Asymmetric Phenomena in Blast Furnace Analyzed by Discrete Element Method

(2010) Shungo Natsui et al.   ISIJ INTERNATIONAL

Numerical Modeling of Reaction and Flow Characteristics in a Blast Furnace with Consideration of Layered Burden

(2010) Kwangheok Yang et al.   ISIJ INTERNATIONAL

Modeling of Blast Furnace with Layered Cohesive Zone

(2010) X.F. Dong et al.   METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

Sensitivity Analysis of Physical Parameters in Discrete Element Method Compared with Blast Furnace Cold Model Experiments

(2010) Shungo Natsui et al.   TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN

Stress fields of solid flow in a model blast furnace

(2009) H. P. Zhu et al.   GRANULAR MATTER

Optimization of Physical Parameters of Discrete Element Method for Blast Furnace and Its Application to the Analysis on Solid Motion around Raceway

(2009) Shungo Natsui et al.   ISIJ INTERNATIONAL

Modelling of Multiphase Flow in Ironmaking Blast Furnace

(2008) X. F. Dong et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Discrete particle simulation of gas–solid flow in a blast furnace

(2007) Z.Y. Zhou et al.   COMPUTERS & CHEMICAL ENGINEERING