Effects of a Destabilization Heat Treatment on the Microstructure and Abrasive Wear Behavior of High-Chromium White Cast Iron Investigated Using Different Characterization Techniques

The hypoeutectic white cast iron was subjected to various destabilization heat treatment temperatures of 1173 K, 1273 K, and 1373 K (900 A degrees C, 1000 A degrees C, and 1100 A degrees C) for 2 hours. The as-cast and destabilized specimens were characterized by optical metallography, classical direct comparison, and the Rietveld method. The volume fractions of carbides were measured by optical metallography. Moreover, the volume fractions of retained austenite and martensite were measured by the classical direct comparison method. Despite the limitations of optical metallography and the classical direct comparison method, the Rietveld method was successively and accurately applied to determine the volume fractions of all phases. In addition, the Rietveld analysis yielded certain results, such as the crystallographic properties of the phases that can be used to explain the relationship between the microstructural parameters and the wear behavior. Abrasive wear tests with different sliding speeds were carried out on the as-cast and destabilized alloys to identify the effect of microstructural parameters on the wear behavior. The results indicated that the morphologies of secondary carbides, the crystallographic properties of the phases, and the proper combination of the amount of martensite, retained austenite, and carbides were the principle parameters that affect the hardness and wear behavior of the alloy.