Natural aging behaviour of friction stir welded 6005A-T6 aluminium alloy

By local thermal cycles and hardness measurements, supported by transmission electron microscopy, the post-weld natural aging behaviour of friction stir welded 6005A-T6 aluminium alloy was investigated. The results show that the softening in the nugget zone and thermo-mechanically affected zone immediately after welding is mainly caused by the high peak temperatures and rapid cooling rates, resulting in the original beta '' precipitates dissolving and restraining re-precipitation. On the one hand, the hardness recovery in both microstructural zones during post-weld natural aging is attributed to the formation of clusters or GP zones depending on the natural aging time. On the other hand, the softening in the heat-affected zone after welding is due to the transformation of the beta '' to beta precipitates and the precipitation of Q'. Natural aging has little effect on the microstructure and hardness of the heat-affected zone. The mechanism of natural aging behaviour was discussed. (C) 2013 Elsevier B.V. All rights reserved.