标题
Finite Element Analysis of Laser Welding: A State of Art Review
作者
关键词
-
出版物
MATERIALS AND MANUFACTURING PROCESSES
Volume 27, Issue 12, Pages 1354-1365
出版商
Informa UK Limited
发表日期
2012-08-14
DOI
10.1080/10426914.2012.709345
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Laser pulsed welding in thin sheets of Zircaloy-4
- (2012) Quhon Han et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Real-time monitoring of laser welding of galvanized high strength steel in lap joint configuration
- (2012) Fanrong Kong et al. OPTICS AND LASER TECHNOLOGY
- Optimization of weld bead geometry in laser welding with filler wire process using Taguchi’s approach
- (2012) Yang dongxia et al. OPTICS AND LASER TECHNOLOGY
- Welding of polymers using a 2μm thulium fiber laser
- (2012) Ilya Mingareev et al. OPTICS AND LASER TECHNOLOGY
- Effects of temperature-dependent material properties and shielding gas on molten pool formation during continuous laser welding of AZ91 magnesium alloy
- (2012) Sana Bannour et al. OPTICS AND LASER TECHNOLOGY
- Numerical and experiment analysis of residual stress on magnesium alloy and steel butt joint by hybrid laser-TIG welding
- (2011) Zhi Zeng et al. COMPUTATIONAL MATERIALS SCIENCE
- Numerical simulation of the electron beam welding process
- (2011) Piotr Lacki et al. COMPUTERS & STRUCTURES
- Stress intensity factor solutions for estimation of fatigue lives of laser welds in lap-shear specimens
- (2011) Kulthida Sripichai et al. ENGINEERING FRACTURE MECHANICS
- Failure mode of laser welds in lap-shear specimens of high strength low alloy (HSLA) steel sheets
- (2011) K. ASIM et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- A review of finite element analysis of adhesively bonded joints
- (2011) Xiaocong He INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Recent development in finite element analysis of self-piercing riveted joints
- (2011) Xiaocong He et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Laser welding of Haynes 188 alloy sheet: thermal stress analysis
- (2011) Bekir Sami Yilbas et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Crack retardation mechanism due to overload in base material and laser welds of Al alloys
- (2011) S. Daneshpour et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue strength of laser beam welded automotive components made of thin steel sheets considering size effects
- (2011) J. Baumgartner et al. INTERNATIONAL JOURNAL OF FATIGUE
- Numerical and Experimental Investigation of Tensile Behavior of Laser Beam Welded TRIP700 Steel
- (2011) Uwe Reisgen et al. ISIJ INTERNATIONAL
- Numerical and experimental study of thermally induced residual stress in the hybrid laser–GMA welding process
- (2011) Fanrong Kong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Improving interfacial reaction nonhomogeneity during laser welding–brazing aluminum to titanium
- (2011) Shuhai Chen et al. MATERIALS & DESIGN
- Finite-element thermal analysis of laser welding of galvanized high-strength steel in a zero-gap lap joint configuration and its experimental verification
- (2011) Junjie Ma et al. MATERIALS & DESIGN
- Compatible finite element modelling of laser welded region for crash analysis of autobody assemblies
- (2011) J Ha et al. MATERIALS RESEARCH INNOVATIONS
- Laser micro-welding of aluminum and copper with and without tin foil alloy
- (2011) Mohammad M. Hailat et al. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS
- Analysis of a fibre laser welding case study, utilising a matrix flow chart
- (2010) J. Karlsson et al. APPLIED SURFACE SCIENCE
- Modeling of failure mode of laser welds in lap-shear specimens of HSLA steel sheets
- (2010) Jaewon Lee et al. ENGINEERING FRACTURE MECHANICS
- Numerical simulation of laser–tungsten inert arc deep penetration welding between WC–Co cemented carbide and invar alloys
- (2010) Pei-quan Xu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Finite element analysis of metallurgical phase transformations in AA 6056-T4 and their effects upon the residual stress and distortion states of a laser welded T-joint
- (2010) Muhammad Zain-ul-abdein et al. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
- Finite volume model for laser-soot interaction for a laser transmission welding process
- (2010) L. S. Mayboudi et al. JOURNAL OF LASER APPLICATIONS
- Finite element simulation of magnesium alloys laser beam welding
- (2010) Asma Belhadj et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- 3D finite element modeling of the thermally induced residual stress in the hybrid laser/arc welding of lap joint
- (2010) Fanrong Kong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Numerical simulation and experimental investigation of laser overlap welding of Ti6Al4V and 42CrMo
- (2010) Shusen Zhao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A Comprehensive Numerical Stress—Strain Analysis of Laser Beam Butt-Welded Titanium Compared with Austenitic Steel Joints
- (2010) C Casavola et al. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
- Fatigue resistance of titanium laser and hybrid welded joints
- (2010) C. Casavola et al. MATERIALS & DESIGN
- Generalising fatigue stress analysis of different laser weld geometries
- (2010) M.M. Alam et al. MATERIALS & DESIGN
- Laser Beam Welding of AZ31 Magnesium Alloy with Filler Strip
- (2010) Qiong Chen et al. MATERIALS AND MANUFACTURING PROCESSES
- Autogenous Laser Keyhole Welding of AISI 316LTi
- (2010) Clayton D'amato et al. MATERIALS AND MANUFACTURING PROCESSES
- Low-Power Laser/TIG Hybrid Welding Process of Magnesium Alloy with Filler Wire
- (2010) Liming Liu et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of Fiber Laser–MIG Hybrid Process Parameters on Weld Bead Shape and Tensile Properties of Commercially Pure Titanium
- (2010) Cui Li et al. MATERIALS AND MANUFACTURING PROCESSES
- The influence of surface geometry and topography on the fatigue cracking behaviour of laser hybrid welded eccentric fillet joints
- (2009) M.M. Alam et al. APPLIED SURFACE SCIENCE
- Adaptive finite element models applied to the laser welding problem
- (2009) J. Montalvo-Urquizo et al. COMPUTATIONAL MATERIALS SCIENCE
- A multiphase mechanical model for Ti–6Al–4V: Application to the modeling of laser assisted processing
- (2009) A. Longuet et al. COMPUTATIONAL MATERIALS SCIENCE
- Recent development in finite element analysis of clinched joints
- (2009) Xiaocong He INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Development of a finite element based heat transfer model for conduction mode laser spot welding process using an adaptive volumetric heat source
- (2009) S. Bag et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Optimization of Laser Transmission Welding Process for Thermoplastic Composite Parts using Thermo-Mechanical Simulation
- (2009) G.N. Labeas et al. JOURNAL OF COMPOSITE MATERIALS
- Residual stress analysis of laser spot welding of steel sheets
- (2009) P. Martinson et al. MATERIALS & DESIGN
- Effect of Laser Welding Variables on the Formability of 3 wt% Si-Added Steel Welds
- (2009) Joon Sik Park et al. MATERIALS AND MANUFACTURING PROCESSES
- Formability Analysis of Diode-Laser-Welded Tailored Blanks of Advanced High-Strength Steel Sheets
- (2009) S.K. Panda et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Optimisation of laser welding process for thermoplastic composite materials with regard to component quality and cost
- (2009) Ch. V. Katsiropoulos et al. PLASTICS RUBBER AND COMPOSITES
- Finite-element modelling and updating of laser spot weld joints in a top-hat structure for dynamic analysis
- (2009) N A Husain et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Residual stresses analysis of ND-YAG laser welded joints
- (2008) J.M. Costa et al. ENGINEERING FAILURE ANALYSIS
- Some studies on temperature profiles in AISI 304 stainless steel sheet during laser beam welding using FE simulation
- (2008) N. Siva Shanmugam et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Prediction of residual stresses and distortions due to laser beam welding of butt joints in pressure vessels
- (2008) G.A. Moraitis et al. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
- Thermoviscoplastic modelling of asymmetric effects for polymers at large strains
- (2008) R. Mahnken et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Numerical Simulations and Experimental Results of Tensile Test Behavior of Laser Butt Welded DP980 Steels
- (2008) S. K. Panda et al. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
- Optimization of Processing Parameters During Laser Cladding of ZE41A-T5 Magnesium Alloy Castings Using Taguchi Method
- (2008) X. Cao et al. MATERIALS AND MANUFACTURING PROCESSES
- Process Parameters Optimization of Laser Beam Welded Joints by Neural Network
- (2008) S. Missori et al. MATERIALS AND MANUFACTURING PROCESSES
- Study on hybrid heat source overlap welding of magnesium alloy AZ31B
- (2008) G.L. Liang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of the silicon content on the mechanical properties of AA6xxx laser welds
- (2008) D. Fabrègue et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Experimental and numerical study of static and fatigue properties of titanium alloy welded joints
- (2008) C. Casavola et al. MECHANICS OF MATERIALS
- Simulation of the residual stresses in the contour laser welding of thermoplastics
- (2008) H. Potente et al. POLYMER ENGINEERING AND SCIENCE
- A study of laser welding modes with varying beam energy levels
- (2008) G Buvanashekaran et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Finite element analysis of effects of soft zones on formability of laser welded advanced high strength steels
- (2008) S. K. Panda et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Self-pierce riveting for sheet materials: State of the art
- (2007) Xiaocong He et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Become a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get StartedAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started