标题
Mechanical Properties of Hybrid Fibers-Reinforced Polymer Composite: A Review
作者
关键词
-
出版物
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING
Volume 55, Issue 6, Pages 626-642
出版商
Informa UK Limited
发表日期
2015-11-06
DOI
10.1080/03602559.2015.1098694
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- High performance hybrid PP and PLA biocomposites reinforced with short man-made cellulose fibres and softwood flour
- (2015) A.K. Bledzki et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Flexural strength of bidirectional hybrid epoxy composites reinforced by E glass and T700S carbon fibres
- (2015) Chensong Dong et al. COMPOSITES PART B-ENGINEERING
- Effect of layering sequence and chemical treatment on the mechanical properties of woven kenaf–aramid hybrid laminated composites
- (2015) R. Yahaya et al. MATERIALS & DESIGN
- Mechanical properties of banana/kenaf fiber-reinforced hybrid polyester composites: Effect of woven fabric and random orientation
- (2015) A. Alavudeen et al. MATERIALS & DESIGN
- Hybrid composites prepared from Industrial waste: Mechanical and swelling behavior
- (2015) Khalil Ahmed Journal of Advanced Research
- Damping of thermoset and thermoplastic flax fibre composites
- (2014) F. Duc et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Study on short ramie fiber/poly(lactic acid) composites compatibilized by maleic anhydride
- (2014) Tao Yu et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Effect of nanoclays on the mechanical properties and durability of novolac phenolic resin/woven glass fiber composite at various chemical environments
- (2014) Mostafa Eesaee et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Effect of hybrid carbon nanotube/short glass fiber reinforcement on the properties of polypropylene composites
- (2014) N. Gamze Karsli et al. COMPOSITES PART B-ENGINEERING
- Hybrid carbon nanotube–carbon fiber composites with improved in-plane mechanical properties
- (2014) A.Y. Boroujeni et al. COMPOSITES PART B-ENGINEERING
- Environmental effects on the mechanical behaviour of pultruded jute/glass fibre-reinforced polyester hybrid composites
- (2014) Hazizan Md Akil et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Properties of polypropylene composites filled with a mixture of household waste of mate-tea and wood particles
- (2014) Bruno D. Mattos et al. CONSTRUCTION AND BUILDING MATERIALS
- Bio-composites: Development and mechanical characterization of banana/sisal fibre reinforced poly lactic acid (PLA) hybrid composites
- (2014) B. Asaithambi et al. FIBERS AND POLYMERS
- Review: Raw Natural Fiber–Based Polymer Composites
- (2014) Vijay Kumar Thakur et al. INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION
- Characterization of physical, mechanical, thermal and morphological properties of agro-waste betel nut (Areca catechu) husk fibre
- (2014) L. Yusriah et al. JOURNAL OF CLEANER PRODUCTION
- Mechanical performance of woven kenaf-Kevlar hybrid composites
- (2014) R Yahaya et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Pineapple leaf/recycled disposable chopstick hybrid fiber-reinforced biodegradable composites
- (2014) Yeng-Fong Shih et al. Journal of the Taiwan Institute of Chemical Engineers
- Influence of redmud on the mechanical, damping and chemical resistance properties of banana/polyester hybrid composites
- (2014) V. Arumuga prabu et al. MATERIALS & DESIGN
- Evaluation of mechanical properties of banana and sisal fiber reinforced epoxy composites: Influence of glass fiber hybridization
- (2014) V.P. Arthanarieswaran et al. MATERIALS & DESIGN
- High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers
- (2014) Lazaros Tzounis et al. MATERIALS & DESIGN
- Effect of hybridization on the physical and mechanical properties of high density polyethylene–(pine/agave) composites
- (2014) A.A. Pérez-Fonseca et al. MATERIALS & DESIGN
- Determination of mechanical properties of intra-layer abaca–jute–glass fiber reinforced composite
- (2014) B. Vijaya Ramnath et al. MATERIALS & DESIGN
- Evaluation of mechanical and thermal properties of banana–flax based natural fibre composite
- (2014) V.S. Srinivasan et al. MATERIALS & DESIGN
- Measurement of mechanical and physical properties of particleboard by hybridization of kenaf with rubberwood particles
- (2014) M.T. Paridah et al. MEASUREMENT
- Effects of kenaf contents and fiber orientation on physical, mechanical, and morphological properties of hybrid laminated composites for vehicle spall liners
- (2014) R. Yahaya et al. POLYMER COMPOSITES
- Development of flax/carbon fibre hybrid composites for enhanced properties
- (2013) H.N. Dhakal et al. CARBOHYDRATE POLYMERS
- Modification of oil palm empty fruit bunch fibers by nanoparticle impregnation and alkali treatment
- (2013) M. N. K. Chowdhury et al. CELLULOSE
- Hybrid cork–polymer composites containing sisal fibre: Morphology, effect of the fibre treatment on the mechanical properties and tensile failure prediction
- (2013) Emanuel M. Fernandes et al. COMPOSITE STRUCTURES
- Study on the mechanical properties and thermal properties of jute and banana fiber reinforced epoxy hybrid composites
- (2013) M. Boopalan et al. COMPOSITES PART B-ENGINEERING
- Hybridization effect on the mechanical properties of curaua/glass fiber composites
- (2013) José Humberto Santos Almeida et al. COMPOSITES PART B-ENGINEERING
- Effect of fiber type and combinations on the mechanical, physical and thermal stability properties of polyester hybrid composites
- (2013) M.T. Isa et al. COMPOSITES PART B-ENGINEERING
- Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications
- (2013) A. Atiqah et al. COMPOSITES PART B-ENGINEERING
- Flax fibre and its composites – A review
- (2013) Libo Yan et al. COMPOSITES PART B-ENGINEERING
- Effect of stacking sequence on the flexural properties of hybrid composites reinforced with carbon and basalt fibers
- (2013) I.D.G. Ary Subagia et al. COMPOSITES PART B-ENGINEERING
- Mechanical properties of hybrid composites using finite element method based micromechanics
- (2013) Sayan Banerjee et al. COMPOSITES PART B-ENGINEERING
- Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites
- (2013) Yongli Zhang et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Twin-screw extrusion impact on natural fibre morphology and material properties in poly(lactic acid) based biocomposites
- (2013) G. Gamon et al. INDUSTRIAL CROPS AND PRODUCTS
- Study of flax hybrid preforms reinforced epoxy composites
- (2013) B. A Muralidhar MATERIALS & DESIGN
- Mechanical behaviour of jute cloth/wool felts hybrid laminates
- (2013) C. Santulli et al. MATERIALS & DESIGN
- Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree
- (2013) J. Sahari et al. MATERIALS & DESIGN
- Mechanical, thermophysical and fire properties of sansevieria fiber-reinforced polyester composites
- (2013) K. Ramanaiah et al. MATERIALS & DESIGN
- Evaluation of mechanical properties of abaca–jute–glass fibre reinforced epoxy composite
- (2013) B. Vijaya Ramnath et al. MATERIALS & DESIGN
- Static and dynamic mechanical properties of alkali treated unidirectional continuous Palmyra Palm Leaf Stalk Fiber/jute fiber reinforced hybrid polyester composites
- (2013) D. Shanmugam et al. MATERIALS & DESIGN
- Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion
- (2013) R. Petrucci et al. MATERIALS & DESIGN
- Novel lignocellulosic hybrid particleboard composites made from rice straws and coir fibers
- (2013) Li Zhang et al. MATERIALS & DESIGN
- Development of coir pith/nylon fabric/epoxy hybrid composites: Mechanical and ageing studies
- (2013) R. Narendar et al. MATERIALS & DESIGN
- Investigations on the fabrication and the characterization of glass/epoxy, carbon/epoxy and hybrid composites used in the reinforcement and the repair of aeronautic structures
- (2013) N. Guermazi et al. MATERIALS & DESIGN
- Preparation and characterization of bagasse/HDPE composites using multi-walled carbon nanotubes
- (2012) Alireza Ashori et al. CARBOHYDRATE POLYMERS
- Effect of basalt fiber hybridization on the impact behavior under low impact velocity of glass/basalt woven fabric/epoxy resin composites
- (2012) Fabrizio Sarasini et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
- (2012) M.M. Kabir et al. COMPOSITES PART B-ENGINEERING
- Hybrid polymeric composites reinforced with sisal fibres and silica microparticles
- (2012) Leandro José da Silva et al. COMPOSITES PART B-ENGINEERING
- Effect of jute fibre loading on tensile and dynamic mechanical properties of oil palm epoxy composites
- (2012) M. Jawaid et al. COMPOSITES PART B-ENGINEERING
- Mechanical property evaluation of sisal–jute–glass fiber reinforced polyester composites
- (2012) M. Ramesh et al. COMPOSITES PART B-ENGINEERING
- Effect of the carbon nanotube functionalization on flexural properties of multiscale carbon fiber/epoxy composites manufactured by VARIM
- (2012) M. Sánchez et al. COMPOSITES PART B-ENGINEERING
- Mechanical and water absorption properties of woven jute/banana hybrid composites
- (2012) N. Venkateshwaran et al. FIBERS AND POLYMERS
- Biocomposites from wheat proteins and fibers: Structure/mechanical properties relationships
- (2012) Beatriz Montaño-Leyva et al. INDUSTRIAL CROPS AND PRODUCTS
- Study on mechanical and tribo-performance of rice-husk filled glass–epoxy hybrid composites
- (2012) Arun Kumar Rout et al. MATERIALS & DESIGN
- Date palm wood flour/glass fibre reinforced hybrid composites of recycled polypropylene: Mechanical and thermal properties
- (2012) Mariam A. AlMaadeed et al. MATERIALS & DESIGN
- Thermal and mechanical properties of waste grass broom fiber-reinforced polyester composites
- (2012) K. Ramanaiah et al. MATERIALS & DESIGN
- Study of hybrid intralaminate curaua/glass composites
- (2012) José Humberto Santos Almeida Júnior et al. MATERIALS & DESIGN
- Potential materials for food packaging from nanoclay/natural fibres filled hybrid composites
- (2012) K. Majeed et al. MATERIALS & DESIGN
- In State of Art: Mechanical and tribological behaviour of polymeric composites based on natural fibres
- (2012) A. Shalwan et al. MATERIALS & DESIGN
- Effects of surfactants on the functional and structural properties of kudzu (Pueraria lobata) starch/ascorbic acid films
- (2011) Yu Zhong et al. CARBOHYDRATE POLYMERS
- Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites
- (2011) N. Venkateshwaran et al. MATERIALS & DESIGN
- Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures
- (2011) Jin Zhang et al. MATERIALS & DESIGN
- Compatibilizing effects for improving mechanical properties of biodegradable poly (lactic acid) and polycarbonate blends
- (2011) Jae Bok Lee et al. POLYMER DEGRADATION AND STABILITY
- Influence of fiber surface treatment and length on physico-chemical properties of short random banana fiber-reinforced castor oil polyurethane composites
- (2011) Claudia Merlini et al. POLYMER TESTING
- Effect of surface microfibrillation of sisal fibre on the mechanical properties of sisal/aramid fibre hybrid composites
- (2010) Lin Xin Zhong et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Oil palm fiber (OPF) and its composites: A review
- (2010) S. Shinoj et al. INDUSTRIAL CROPS AND PRODUCTS
- Sisal/Carbon Fibre Reinforced Hybrid Composites: Tensile, Flexural and Chemical Resistance Properties
- (2010) P. Noorunnisa Khanam et al. JOURNAL OF POLYMERS AND THE ENVIRONMENT
- Tensile, Flexural and Chemical Resistance Properties of Sisal Fibre Reinforced Polymer Composites: Effect of Fibre Surface Treatment
- (2010) P. Noorunnisa Khanam et al. JOURNAL OF POLYMERS AND THE ENVIRONMENT
- Mechanical and thermal properties of sisal fiber-reinforced rubber seed oil-based polyurethane composites
- (2010) I.O. Bakare et al. MATERIALS & DESIGN
- Microstructural, physico-chemical and mechanical characterisation of Sansevieria cylindrica fibres – An exploratory investigation
- (2010) V.S. Sreenivasan et al. MATERIALS & DESIGN
- Glass–basalt/epoxy hybrid composites for marine applications
- (2010) V. Fiore et al. MATERIALS & DESIGN
- Mechanical performance of oil palm empty fruit bunches/jute fibres reinforced epoxy hybrid composites
- (2010) M. Jawaid et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hybrid composites of jute and man-made cellulose fibers with polypropylene by injection moulding
- (2009) Mubarak A. Khan et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Natural and man-made cellulose fibre-reinforced poly(lactic acid) (PLA) composites: An overview about mechanical characteristics and application areas
- (2009) Nina Graupner et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Harakeke (phormium tenax) fibre–waste plastics blend composites processed by screwless extrusion
- (2009) Krishnan Jayaraman et al. COMPOSITES PART B-ENGINEERING
- Characterization of treated date palm tree fiber as composite reinforcement
- (2009) Ahmad Alawar et al. COMPOSITES PART B-ENGINEERING
- Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibers
- (2009) Igor Maria De Rosa et al. MATERIALS & DESIGN
- Effect of moisture absorption on the mechanical properties of randomly oriented natural fibers/polyester hybrid composite
- (2009) A. Athijayamani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Processing of poly(lactic acid): Characterization of chemical structure, thermal stability and mechanical properties
- (2009) F. Carrasco et al. POLYMER DEGRADATION AND STABILITY
- Mechanical properties of wetlaid lyocell and hybrid fiber-reinforced composites with polypropylene
- (2008) Richard K. Johnson et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites
- (2008) K. Sabeel Ahmed et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of fiber surface-treatments on the properties of laminated biocomposites from poly(lactic acid) (PLA) and kenaf fibers
- (2007) Masud S. Huda et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Study of the tensile properties of stinging nettle fibres (Urtica dioica)
- (2007) Edwin Bodros et al. MATERIALS LETTERS
- Recent developments in chemical modification and characterization of natural fiber-reinforced composites
- (2007) Maya Jacob John et al. POLYMER COMPOSITES
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now