Solid-state pressureless sintering of silicon carbide below 2000 °C

To date, solid-state pressureless sintering of silicon carbide powder requires sintering aids and high sintering temperature (>2100 degrees C) in order to achieve high sintered density (>95% T.D.). Two-step sintering (TSS) method can allow to set sintering temperature lower than that conventionally required. So, pressureless two-step sintering process was successfully applied for solid-state sintering (boron carbide and carbon as sintering additives) of commercial SiC powder at 1980 degrees C. Microstructure and mechanical properties of TSS-SiC were evaluated and compared to those obtained with the conventional sintering (SSiC) process performed at 2130 degrees C. TSS-SiC showed finer microstructure and higher flexural strength than SSiC with very similar density (98.4% T.D. for TSS-SiC and 98.6% T.D. for SSiC). (C) 2014 Elsevier Ltd. All rights reserved.