4.7 Article

Blue-violet ceramic pigments based on Co and Mg Co2-xMgxP2O7 diphosphates

期刊

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
卷 30, 期 9, 页码 1887-1896

出版社

ELSEVIER SCI LTD
DOI: 10.1016/j.jeurceramsoc.2010.03.017

关键词

Sol-gel processes; Colour; Optical Properties; Phosphates; Blue ceramic pigments

资金

  1. Spanish Ministerio de Educacion y Ciencia [MAT2008-02893]

向作者/读者索取更多资源

Solid solutions of Co and Mg diphosphates with compositions Co2-xMgxP2O7 (x = 0, 0.1, 0.2, 0.3, 0.5, 0.7, 1.0, 1.5 and 1.8) have been prepared and characterized for the first time as alternative low-toxicity blue ceramic pigments. The compositions were prepared through the conventional coprecipitation route and calcined up to 1000 degrees C/2 h. Samples were characterized by thermal analysis, XRD, SEM/EDX, UV-vis-NIR spectroscopy and colour measurements (CIE-L*a*b*.). Isostructural Co2-xMgxP2O7 diphosphate solid solutions (monoclinic system and P21/c spatial group) formed successfully within the studied range of compositions, accompanied only by a minor quantity of residual Co or Mg orthophosphates (M-3(PO4)(2)). Interestingly, the obtained solid solutions developed nice blue-violet colourations even with high Mg doping after enamelling within double-firing (x = 1.5-1.8) and single-firing (x = 1.0-1.5) ceramic glasses. These optimal compositions containing a minimized Co amount (measured values around 7-16 wt%) could be therefore less toxic alternatives to the conventional Co-3(PO4)(2) blue ceramic pigment. (C) 2010 Elsevier Ltd. All rights reserved.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

Article Materials Science, Ceramics

Orthorhombic (Fe2TiO5)-monoclinic (Cr2TiO5) solid solution series: Synthesis by gel routes, coloring and NIR reflectivity evaluation

S. Cerro, C. Gargori, M. Llusar, G. Monros

CERAMICS INTERNATIONAL (2018)

Article Materials Science, Ceramics

Co2P2O7-Ni2P2O7 solid solutions: Structural characterization and color

Ma Angeles Tena, Rafael Mendoza, Camino Trobajo, Jose R. Garcia, Santiago Garcia-Granda

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Article Materials Science, Ceramics

Beige materials for the ceramic industry: AlxVyFe1-x P1-y O4 (0.0 ≤ x ≤ 0.3, 0.0 ≤ y ≤ 0.1) solid solutions

M. A. Tena, Rafael Mendoza, David Martinez, Camino Trobajo, Jose R. Garcia, Santiago Garcia-Granda

CERAMICS INTERNATIONAL (2019)

Article Materials Science, Ceramics

Ceramic pigments from CoxNi3-xP2O8 (0 ≤ x < 3) solid solutions

M. A. Tena, Rafael Mendoza, Camino Trobajo, Jose R. Garcia, Santiago Garcia-Granda

Summary: CoxNi3-xP2O8 solid solutions were synthesized using chemical co-precipitation method. The study revealed that these solid solutions exhibited stable structural properties and color changes at different temperature ranges depending on their compositions.

CERAMICS INTERNATIONAL (2021)

Article Chemistry, Physical

Cobalt Minimisation in Violet Co3P2O8 Pigment

Ma Angeles Tena, Rafael Mendoza, Camino Trobajo, Santiago Garcia-Granda

Summary: This study explores the limitations of cobalt violet orthophosphate in the ceramic industry and proposes a solution by synthesizing solid solutions to reduce cobalt content and increase the melting point. Additionally, the study shows how the local environment of cobalt affects the color change from purple to blue during the firing process.

MATERIALS (2022)

Article Materials Science, Ceramics

Sol-Gel ceramic glazes with photocatalytic activity

G. Monros, M. Llusar, J. Badenes, R. Galindo

Summary: A frit is a glassy ceramic composition that is made by fusion, quenching, and granulating. It can be used for the preparation of ceramic glazes for waterproofing and aesthetic purposes.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2022)

Article Materials Science, Ceramics

Green and blue materials for the ceramic industry from pink MgCoxNi1-xSiO4 (0 ≤ x ≤ 1) solid solutions

M. A. Tena, Rafael Mendoza, Camino Trobajo, Jose R. Garcia, Santiago Garcia-Granda

Summary: MgCoxNi1-xSiO4 (0.0 < x < 1.0) solid solutions with an olivine structure were synthesized via the chemical coprecipitation method, and materials with a smaller M(II) (M = Co, Ni) amount than Co2SiO4 and Ni2SiO4 compounds were obtained. The distribution of Co(II) and Ni(II) ions in the solid solutions were found to be random at 1200 degrees C, with a higher occupation of Co(II) and Ni(II) ions in M1 octahedral sites compared to M2 octahedral sites. The preference of Mg(II) ions for M2 sites and the M1-O and M2-O distances jointly explain the pink color of the MgCoxNi1-xSiO4 solid solutions, while Co2SiO4 has a blue color. The presence of tetrahedral Co(II) ions leads to a change in color from pink to green or blue when these solid solutions are enamelled.

CERAMICS INTERNATIONAL (2023)

Article Chemistry, Physical

High NIR Reflectance and Photocatalytic Ceramic Pigments Based on M-Doped Clinobisvanite BiVO4 (M = Ca, Cr) from Gels

Guillermo Monros, Mario Llusar, Jose A. Badenes

Summary: Clinobisvanite is a wide-band semiconductor with photocatalytic activity, high NIR reflectance, and PEC application potential. Its synthesis and characterization with different dopants were studied using gel methods and compared with the ceramic route. The materials doped with calcium or chromium exhibited various functionalities, including pigments for paints and glazes, high NIR reflectance for building applications, and photocatalytic activity.

MATERIALS (2023)

Article Materials Science, Ceramics

Ecofriendly High NIR Reflectance Ceramic Pigments Based on Rare Earths Compared with Classical Chromophores Prepared by DPC Method

Guillermo Monros, Jose A. Badenes, Mario Llusar

Summary: The high NIR reflectance ceramic pigments palette based on rare earths was compared with the traditional pigments palette, showing higher NIR reflectance for rare earth pigments but smaller differences in normalized measurements. The stability study revealed that the rare earth pigments have lower stability compared to the classical DPC pigments, except for the red-brown cerianite pigment.

CERAMICS-SWITZERLAND (2022)

Meeting Abstract Chemistry, Multidisciplinary

Structural characterization of MgxCo3-xP2O8 solid solutions

M. A. Tena, Rafael Mendoza, Camino Trobajo, Jose R. Garcia, Santiago Garcia-Granda

ACTA CRYSTALLOGRAPHICA A-FOUNDATION AND ADVANCES (2021)

Article Multidisciplinary Sciences

Structural characterization and colour of Ni3-xCuxP2O8 (0≤x≤3) materials

M. A. Tena, Rafael Mendoza, Camino Trobajo, Jose R. Garcia, Santiago Garcia-Granda

Summary: The study investigated the structure and color properties of Ni3-xCuxP2O8 solid solutions, identifying structures related to Ni3P2O8, Ni2CuP2O8, and Cu3P2O8. Structural distortions and color changes were observed with increasing Cu content in the solid solutions.

SN APPLIED SCIENCES (2021)

Article Multidisciplinary Sciences

Characterization of yellow and red inorganic pigments from Mg0.5Cu1.5VxP2-xO7 (0 ≤ x ≤ 2) solid solutions

M. A. Tena, Rafael Mendoza, David Martinez, Camino Trobajo, Jose R. Garcia, Santiago Garcia-Granda

SN APPLIED SCIENCES (2020)

Article Polymer Science

Transcription of Nanofibrous Cerium Phosphate Using a pH-Sensitive Lipodipeptide Hydrogel Template

Mario Llusar, Beatriu Escuder, Juan de Dios Lopez-Castro, Susana Trasobares, Guillermo Monros

Article Materials Science, Ceramics

Phase equilibria in the ZrO2-GdO1.5-TaO2.5 system at 1500 °C

Dan Zhao, Yi Feng, Zhipeng Pi, Fan Zhang

Summary: Phase equilibria in the ZrO2-GdO1.5-TaO2.5 (ZGTO) system were experimentally investigated, and the differences between ZGTO and the existing ZrO2-YO1.5-TaO2.5 (ZYTO) were discussed. The study is useful for thermodynamic assessment of ZGTO and can guide the design of novel thermal barrier coatings materials.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Article Materials Science, Ceramics

Alumina precipitate along dislocations in rutile single crystal of diffusion couple during cooling from 1200° to 1400°C

Yutaka Ohya, Wingki Mey Hendra, Chika Takai-Yamashita, Takayuki Ban

Summary: Diffusion couples of rutile and corundum single crystals were prepared and examined to study the solid solution and precipitation of corundum in rutile during cooling. Different precipitation forms of corundum were observed under different cooling conditions.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Article Materials Science, Ceramics

Water-enhanced plasticity of calcium fluoride

Jiaming Zhan, Yunfa Guo, Hao Wang

Summary: This study systematically investigates the mechanical behaviors of calcium fluoride in humid environments. The effects of water on the deformation and plastic enhancement of CaF2 under indentation are explored through microindentation experiments, atomic simulations, and Raman spectroscopy measurement.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Article Materials Science, Ceramics

Microwave tunability in tin substituted barium titanate

Hangfeng Zhang, Henry Giddens, Theo Graves Saunders, Matteo Palma, Isaac Abrahams, Haixue Yan, Yang Hao

Summary: The relationship between low and high frequency tunabilities in tin substituted barium titanate ceramics was investigated. It was found that there are differences in tunabilities at different frequencies due to the different activities of larger ferroelectric domains and polar nanoclusters.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Article Materials Science, Ceramics

Boosting energy storage performance in negative temperature coefficient linear-like dielectrics via composite modulation in the superparaelectric state

Kaibiao Xi, Jiacheng Liu, Beibei Song, Huarong Cheng, Yihao Li, Xiaole Yu, Mupeng Zheng, Mankang Zhu, Yudong Hou

Summary: Composite modulation in the superparaelectric state of the BTBZ-CT system is proposed as an effective strategy to achieve both NTCC and excellent energy storage performance in dielectric ceramics. The addition of BZ and CT to BT ferroelectrics can move the SPE state to the normal use temperature zone, resulting in enhanced NTCC characteristics and energy storage performance. Furthermore, intentional precipitation of CT at grain boundaries can refine the grain size, increase the bandgap, and strengthen the local electric field distribution, thereby enhancing the breakdown electric field.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Article Materials Science, Ceramics

Sinterability of sodium bismuth titanate-based electroceramics at low temperatures

Hamed Salimkhani, Lovro Fulanovic, Till Froemling

Summary: The demand for robust multilayer ceramic capacitors with high-temperature and high-power capabilities is increasing rapidly. However, cost-effective production is a challenge. This study investigates the use of Na0.5Bi0.5TiO3-based materials as promising lead-free options. By adding sintering aids, the sintering temperature of Na0.5Bi0.5TiO3-BaTiO3-CaZrO3-BiAlO3 solid solutions was successfully reduced to 975 degrees C, suitable for co-sintering with Cu electrodes without adverse effects on capacitor properties.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Article Materials Science, Ceramics

Residual stress and interface debonding behavior in Si3N4w reinforced SiCN composites prepared by the PIP process: A case study

Mingxing Li, Ran Mo, Zeshui Xu, Jie Zhou, Conglin Zhang, Xuefeng Cui, Fang Ye, Laifei Cheng, Ralf Riedel

Summary: Polymer infiltration and pyrolysis is an effective method for preparing ceramic matrix composites. The transformation of polymer to ceramic during the process affects the residual stress and interface behavior in the composites.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Article Materials Science, Ceramics

Porous spheres enabling excellent high-temperature abradability and long lifetime for abradable seal coating

Yan Kang, Lin Chen, Chang-Jiu Li, Guan-Jun Yang

Summary: A novel abradable seal coating with low hardness and high bonding strength was successfully designed and prepared. This coating has significantly higher abradability and erosion resistance compared to metal-based coatings, and can retain excellent abradability and have a long lifetime during service.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Article Materials Science, Ceramics

Influence of raw material purity on microstructure and properties of calcia refractory

Qingzhong Song, Xiangdong Zha, Ming Gao, Yingche Ma

Summary: This study analyzes the influence of calcia refractory purity on the properties of calcia crucibles. Higher purity calcia results in well-developed grains and improved hydration resistance, leading to better high-temperature strength and thermal shock resistance. In contrast, lower purity calcia crucibles exhibit inferior properties. Therefore, high-purity calcia is considered a potential refractory for manufacturing oxide crucibles.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Article Materials Science, Ceramics

Ultra-low thermal conductivity and hydrophobic properties of high entropy β-type quaternary pyrosilicate

Sehreish Abrar, Faisal Nazeer, Zhuang Ma, Ling Liu, Abdul Malik, Mustafa Kamal, Abdullah G. Al-Sehemi

Summary: To raise the operating temperature of Si-based ceramic matrix composites (CMCs), researchers have applied thermal/environmental barrier coating (T/EBCs) materials, typically rare earth silicates. However, the high thermal conductivity and the mismatch of thermal expansion have been major challenges in developing new materials that can offer thermal insulation and environmental protection to CMCs. In this study, entropy engineering was used to create a multicomponent equi-atomic single-phase pyro silicate with extremely low thermal conductivity and enhanced water vapor corrosion resistance. The research findings show the potential of high entropy disilicates in achieving ultra-low thermal conductivity and low weight loss in corrosive environments.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Article Materials Science, Ceramics

Heterogeneous oxidation behavior and kinetic mechanisms of SiBCN ceramic with structure of MA-SiBCN coated by PDCs-SiBCN

Zi-bo Niu, Daxin Li, Dechang Jia, Zhihua Yang, Kunpeng Lin, Paolo Colombo, Ralf Riedel, Yu Zhou

Summary: In this study, SiBCN ceramics with a special structure were prepared to improve the oxidation resistance. The effect of the structure on oxidation behavior and kinetics was investigated, revealing that the special structure can effectively inhibit heterogeneous oxidation and enhance the oxide layer composition.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Article Materials Science, Ceramics

Low temperature densification and dielectric characterization of CeO2 ceramics

Melike Donmez, Metehan Erdogan, Cihangir Duran

Summary: The limited densification of CeO2 ceramics was improved by using an anorthite-based glass, resulting in high dielectric constant and quality factor with minimum dielectric loss. The CeO2-(anorthite-based) glass ceramic showed promising results in terms of low temperature densification and microwave properties.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Article Materials Science, Ceramics

High speed impact and solid-state deposition of alumina particles: A molecular dynamics study

S. Rahmati, R. G. A. Veiga, J. Mostaghimi, T. Coyle, A. Dolatabadi

Summary: This study provides an atomic-scale description of the high-velocity impact of alpha-Al2O3 particles onto an alpha-Al2O3 substrate during Aerosol Deposition (AD). The results suggest that the crystal orientation plays a crucial role in both plasticity and damage of the nanoparticles. Impact velocity has a direct correlation with plasticity and fragmentation, but adhesion efficiency has only a marginal increase. The crucial element lies in the substrate's surface alterations caused by the fragments left on the substrate after impact.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Article Materials Science, Ceramics

Long-term ablation mechanisms of the YB4-Al2O3-Si3N4 modified Cf/ HfC-SiC composites at 2600 °C

Bo-Wen Chen, Yan-Mei Kan, De-Wei Ni, Chun-Jing Liao, Hong-Da Wang, Yu-Sheng Ding, Shao-Ming Dong

Summary: This study characterized the long-term and repeated ablation properties of modified Cf/HfC-SiC composites with YB4-Al2O3-Si3N4 under an air plasma torch. The structural stability and viscosity of the oxide layer were found to affect the ablation resistance of the composites. By forming nano c-HfO2 grains and high-viscosity Al-Si-Y-O glassy phase, the structural stability of the oxide layer was improved, resulting in enhanced ablation resistance. However, the oxidation of Si3N4 led to the formation of NO, NO2, and excessive SiO2 glassy phase, which resulted in a porous structure and reduced the viscosity of the oxide layer. Therefore, the addition of Si3N4 decreased the ablation resistance of the composites.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Article Materials Science, Ceramics

Structure characters, and thermal evolution of electrical and elastic behaviors in xBi(Ni1/2Hf1/2)O3-(1-x)PbTiO3 solid solutions with a tetragonal-pseudocubic phase boundary

Yongxing Wei, Huawei Zhang, Siyuan Dong, Changqing Jin, Chenxing Bai, Junle Dai, Zengzhe Xi, Zhonghua Dai, Zengyun Jian, Li Jin

Summary: In this study, solid solutions of xBi(Ni1/2Hf1/2)O-3-(1 - x)PbTiO3 (xBNH-PT) were synthesized to investigate their phase boundary behaviors and physical properties. The presence of a tetragonal-pseudocubic phase boundary and a spontaneous ferroelectric-relaxor transition at specific compositions were confirmed. The introduction of a tetragonal-pseudocubic phase boundary improved the piezoelectric properties and suppressed the spontaneous ferroelectric-relaxor transition.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)