Numerical and experimental analysis of uncertainty on modal parameters estimated with the stochastic subspace method

Modal parameters of structures are often used as inputs for finite element model updating, vibration control, structural design or structural health monitoring (SHM). In order to test the robustness of these methods, it is a common practice to introduce uncertainty on the eigenfrequencies and modal damping coefficients under the form of a Gaussian perturbation, while the uncertainty on the mode shapes is modeled in the form of independent Gaussian noise at each measured location. A more rigorous approach consists however in adding uncorrelated noise on the time domain responses at each sensor before proceeding to an operational modal analysis. In this paper, we study in detail the resulting uncertainty when modal analysis is performed using the stochastic subspace identification method. A Monte-Carlo simulation is performed on a simply supported beam, and the uncertainty on a set of 5000 modal parameters identified with the stochastic subspace identification method is discussed. Next, 4000 experimental modal identifications of a small clamped-free steel plate equipped with 8 piezoelectric patches are performed in order to confirm the conclusions drawn in the numerical case study. In particular, the results point out that the uncertainty on eigenfrequencies and modal damping coefficients may exhibit a non-normal distribution, and that there is a non-negligible spatial correlation between the uncertainty on mode shapes at sensors of different locations. (C) 2014 Elsevier Ltd. All rights reserved.