标题
Tribological and mechanical behavior of particulate aluminum matrix composites
作者
关键词
-
出版物
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
Volume 33, Issue 23, Pages 2192-2202
出版商
SAGE Publications
发表日期
2014-11-07
DOI
10.1177/0731684414556012
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Investigations on dry sliding wear behavior of in situ casted AA7075–TiC metal matrix composites by using Taguchi technique
- (2014) S. Baskaran et al. MATERIALS & DESIGN
- Experimental investigation on mechanical behaviour, modelling and optimization of wear parameters of B4C and graphite reinforced aluminium hybrid composites
- (2014) A. Baradeswaran et al. MATERIALS & DESIGN
- Mechanical behavior and wear prediction of stir cast Al–TiB2 composites using response surface methodology
- (2014) S. Suresh et al. MATERIALS & DESIGN
- Evaluation of mechanical properties of aluminium alloy–alumina–boron carbide metal matrix composites
- (2014) B. Vijaya Ramnath et al. MATERIALS & DESIGN
- Effect of graphite addition on mechanical behavior of Al6061/TiB2 hybrid composite using acoustic emission
- (2014) S. Suresh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fabrication of Al–2vol% Al2O3/SiC hybrid composite via accumulative roll bonding (ARB): An investigation of the microstructure and mechanical properties
- (2014) M. Reihanian et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigations on mechanical properties of aluminum hybrid composites
- (2014) Dora Siva Prasad et al. Journal of Materials Research and Technology-JMR&T
- Hybrid composites – a better choice for high wear resistant materials
- (2014) Dora Siva Prasad et al. Journal of Materials Research and Technology-JMR&T
- Analysis of dry sliding wear behaviour of Al6061/SiC/Al2O3 hybrid metal matrix composites
- (2013) K. Umanath et al. COMPOSITES PART B-ENGINEERING
- Wear and mechanical characteristics of Al 7075/graphite composites
- (2013) A. Baradeswaran et al. COMPOSITES PART B-ENGINEERING
- Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites
- (2013) A. Baradeswaran et al. COMPOSITES PART B-ENGINEERING
- The design, fabrication and properties of B4C/Al neutron absorbers
- (2013) Peng Zhang et al. JOURNAL OF NUCLEAR MATERIALS
- Influence of reinforcements (SiC and Al2O3) and rotational speed on wear and mechanical properties of aluminum alloy 6061-T6 based surface hybrid composites produced via friction stir processing
- (2013) A. Devaraju et al. MATERIALS & DESIGN
- A study of sliding wear behaviors of Al-7075 alloy and Al-7075 hybrid composite by response surface methodology analysis
- (2013) Ravinder Kumar et al. MATERIALS & DESIGN
- Microstructure and some mechanical properties of fly ash particulate reinforced AA6061 aluminum alloy composites prepared by compocasting
- (2013) J. David Raja Selvam et al. MATERIALS & DESIGN
- Evaluation of microstructure and mechanical properties of Al/Al2O3/SiC hybrid composite fabricated by accumulative roll bonding process
- (2013) Azin Ahmadi et al. MATERIALS & DESIGN
- Development of a novel 6351 Al–(Al4SiC4+SiC) hybrid composite with enhanced mechanical properties
- (2013) Bijay Kumar Show et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Wear and mechanical properties of 6061-T6 aluminum alloy surface hybrid composites [(SiC+Gr) and (SiC+Al2O3)] fabricated by friction stir processing
- (2013) Devaraju Aruri et al. Journal of Materials Research and Technology-JMR&T
- Corrosion and wear behaviour of rice husk ash—Alumina reinforced Al–Mg–Si alloy matrix hybrid composites
- (2013) Kenneth Kanayo Alaneme et al. Journal of Materials Research and Technology-JMR&T
- Fabrication and characterization of A359/Al2O3 metal matrix composite using electromagnetic stir casting method
- (2013) Abhishek Kumar et al. Journal of Materials Research and Technology-JMR&T
- Corrosion and wear behaviour of Al–Mg–Si alloy matrix hybrid composites reinforced with rice husk ash and silicon carbide
- (2013) Kenneth Kanayo Alaneme et al. Journal of Materials Research and Technology-JMR&T
- Influence of the hard coated B4C particulates on wear resistance of Al–Cu alloys
- (2012) Ali Mazahery et al. COMPOSITES PART B-ENGINEERING
- Structural evaluation and mechanical properties of nanostructured Al/B4C composite fabricated by ARB process
- (2012) Morteza Alizadeh et al. COMPOSITES PART B-ENGINEERING
- Metallurgical and mechanical characterization of stir cast AA6061-T6–AlNp composite
- (2012) B. Ashok Kumar et al. MATERIALS & DESIGN
- Application of factorial techniques to study the wear of Al hybrid composites with graphite addition
- (2012) P. Ravindran et al. MATERIALS & DESIGN
- Tribological properties of powder metallurgy – Processed aluminium self lubricating hybrid composites with SiC additions
- (2012) P. Ravindran et al. MATERIALS & DESIGN
- Dry sliding wear behaviour of in situ Al–TiB2 composites
- (2012) K. Niranjan et al. MATERIALS & DESIGN
- Synthesis and characterization of in situ formed titanium diboride particulate reinforced AA7075 aluminum alloy cast composites
- (2012) H.B. Michael Rajan et al. MATERIALS & DESIGN
- Wear performance of Al–SiC–B4C hybrid composites under dry sliding conditions
- (2012) M. Uthayakumar et al. MATERIALS & DESIGN
- Comparison of microstructural and mechanical properties of Al–TiC, Al–B4C and Al–TiC–B4C composites prepared by casting techniques
- (2012) Y. Mazaheri et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural and tribological properties of Al5083 based surface hybrid composite produced by friction stir processing
- (2012) S. Soleymani et al. WEAR
- Comparative processing-structure–property studies of Al–Cu matrix composites reinforced with TiC particulates
- (2011) Hülya Kaftelen et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Production and wear characterisation of AA 6061 matrix titanium carbide particulate reinforced composite by enhanced stir casting method
- (2011) S. Gopalakrishnan et al. COMPOSITES PART B-ENGINEERING
- Studies on mechanical and dry sliding wear of Al6061–SiC composites
- (2011) G.B. Veeresh Kumar et al. COMPOSITES PART B-ENGINEERING
- Microstructure and tribological performance of an aluminium alloy based hybrid composite produced by friction stir processing
- (2011) S.A. Alidokht et al. MATERIALS & DESIGN
- Production and characterization of AA6061–B4C stir cast composite
- (2011) K. Kalaiselvan et al. MATERIALS & DESIGN
- Friction characteristics of aluminium silicon carbide graphite hybrid composites
- (2011) S. Suresha et al. MATERIALS & DESIGN
- Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 composites fabricated by stir and compo-casting processes
- (2011) S.A. Sajjadi et al. MATERIALS & DESIGN
- Effect of volume fraction on microstructure and mechanical properties of Si3N4/Al composites
- (2011) Zi-yang XIU et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Friction and wear behaviour of cast Al 6063 based in situ metal matrix composites
- (2011) C.S. Ramesh et al. WEAR
- Effect of ball milling on the characteristics of nano structure SrFeO3 powder for photocatalytic degradation of methylene blue under visible light irradiation and its reaction kinetics
- (2010) Mohammad Ghaffari et al. CATALYSIS TODAY
- Wear characteristics of hybrid aluminium matrix composites reinforced with graphite and silicon carbide particulates
- (2010) S. Suresha et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Optimization of reinforcement content and sliding distance for AlSi7Mg/SiCp composites using response surface methodology
- (2010) M. Bayhan et al. MATERIALS & DESIGN
- Effect of silicon carbide particulates on wear resistance of graphitic aluminium matrix composites
- (2010) S. Suresha et al. MATERIALS & DESIGN
- Influence of size and volume fraction of SiC particulates on properties of ex situ reinforced Al–4.5Cu–3Mg metal matrix composite prepared by direct metal laser sintering process
- (2010) Subrata Kumar Ghosh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Experimental and modeling investigation on SiCp distribution in powder metallurgy processed SiCp/2024 Al composites
- (2010) Z.Y. Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Processing, microstructure and mechanical properties of nickel particles embedded aluminium matrix composite
- (2010) Devinder Yadav et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characterization of Stir Cast Al—Cu—(fly ash + SiC) Hybrid Metal Matrix Composites
- (2009) K.V. Mahendra et al. JOURNAL OF COMPOSITE MATERIALS
- Effect of addition of graphite particulates on the wear behaviour in aluminium–silicon carbide–graphite composites
- (2009) S. Suresha et al. MATERIALS & DESIGN
- The effect of strontium on the microstructure and wear properties of A356–10%B4C cast composites
- (2009) H.R. Lashgari et al. MATERIALS & DESIGN
- Dry sliding wear behaviour of AA 6351-ZrB2 in situ composite at room temperature
- (2009) G. Naveen Kumar et al. MATERIALS & DESIGN
- Phase transformations of Ni-15wt.% B powders during mechanical alloying and annealing
- (2009) Masoud Nazarian-Samani et al. MATERIALS LETTERS
- Wear behavior of Al–Mg–Cu–based composites containing SiC particles
- (2009) Adel Mahamood Hassan et al. TRIBOLOGY INTERNATIONAL
- Friction and wear behavior of Ni–P coated Si3N4 reinforced Al6061 composites
- (2009) C.S. Ramesh et al. TRIBOLOGY INTERNATIONAL
- A novel way to produce bulk SiCp reinforced aluminum metal matrix composites by friction stir processing
- (2008) Wei Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Investigation of tribological and mechanical properties Al2O3–SiC reinforced Al composites manufactured by casting or P/M method
- (2008) Bekir Sadık Ünlü MATERIALS & DESIGN
- Fabrication and characteristic of Al-based hybrid composite reinforced with tungsten oxide particle and aluminum borate whisker by squeeze casting
- (2008) Y.C. Feng et al. MATERIALS & DESIGN
- Quartz (SiO2p) reinforced chilled metal matrix composite (CMMC) for automotive applications
- (2008) Joel Hemanth MATERIALS & DESIGN
- Microstructure and mechanical properties of Ni–P coated Si3N4 reinforced Al6061 composites
- (2008) C.S. Ramesh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Solute-enhanced tensile ductility of ultrafine-grained Al–Zn alloy fabricated by friction stir processing
- (2008) C.M. Hu et al. SCRIPTA MATERIALIA
- Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024–graphite composites produced by in situ powder metallurgy method
- (2008) F. Akhlaghi et al. WEAR
- Tensile and wear behaviour of in situ Al–7Si/TiB2 particulate composites
- (2007) S. Kumar et al. WEAR
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started