The flow and heat transfer characteristics of multi-thermal fluid in horizontal wellbore coupled with flow in heavy oil reservoirs

As a new improved oil-recovery technique, multi-thermal fluid injection technology through a horizontal well has been widely used in the development process of heavy oil reservoirs. The flow and heat transfer characteristic of multi-thermal fluid in horizontal wellbore is significantly important for the productivity evaluation and parameters design of the horizontal well. Considering the specific physical properties of multi-thermal fluid, fluid absorption in perforation holes and pressure drop characteristics along the horizontal wellbore, this paper developed the flow and heat transfer model of multi-thermal fluid in perforated horizontal wellbore. In order to evaluate the heating effect of the multi-thermal fluid, a concept of effective heating length of a horizontal well is proposed. Then, a sensitivity analysis process is performed to study the influence of reservoir/fluid parameters and operating parameters on the flowing process of multi-thermal fluid in horizontal wellbore. Simultaneously, using the method of orthogonal numerical test, differential analysis and variance analysis are also conducted. Results show that the flowing process of multi-thermal fluid in horizontal wellbore includes a single-phase flowing process and a gas-liquid two-phase flowing process. The influence of oil viscosity on the flow and heat transfer characteristics of multi-thermal fluid in horizontal wellbore is most significant. Thereafter, the solution of our semi-analytical model is compared against the test results of an actual horizontal well from an oilfield in China. It is shown that the model results are in good agreement with the real test results. This model could be used to calculate and predict the flow and heat transfer characteristics of multi-thermal fluid (or saturated steam) in a perforated horizontal wellbore. (C) 2014 Elsevier B.V. All rights reserved.