标题
Properties of open-cell porous metals and alloys for orthopaedic applications
作者
关键词
Selective Laser Melting, Selective Laser Sinter, Electron Beam Melting, Anterior Lumbar Interbody Fusion, Compressive Yield Strength
出版物
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
Volume 24, Issue 10, Pages 2293-2325
出版商
Springer Nature
发表日期
2013-07-12
DOI
10.1007/s10856-013-4998-y
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Structural and mechanical characteristics of porous 316L stainless steel fabricated by indirect selective laser sintering
- (2013) Fangxia Xie et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Reverse freeze casting: A new method for fabricating highly porous titanium scaffolds with aligned large pores
- (2012) Se-Won Yook et al. Acta Biomaterialia
- Mechanical properties of open-cell rhombic dodecahedron cellular structures
- (2012) Sahab Babaee et al. ACTA MATERIALIA
- Characterizations of additive manufactured porous titanium implants
- (2012) Ahmad Basalah et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Processing and characterization of porous titanium for implants by using NaCl as space holder
- (2012) Y. Torres et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Compression fatigue behavior of laser processed porous NiTi alloy
- (2012) Sheldon Bernard et al. Journal of the Mechanical Behavior of Biomedical Materials
- Development and mechanical characterization of porous titanium bone substitutes
- (2012) A. Barbas et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical modulation and bioactive surface modification of porous Ti–10Mo alloy for bone implants
- (2012) Zhifang Gao et al. MATERIALS & DESIGN
- Dynamic freeze casting for the production of porous titanium (Ti) scaffolds
- (2012) Hyun-Do Jung et al. Materials Science & Engineering C-Materials for Biological Applications
- The biocompatibility of dense and porous Nickel–Titanium produced by selective laser melting
- (2012) T. Habijan et al. Materials Science & Engineering C-Materials for Biological Applications
- Titanium foams for biomedical applications: a review
- (2012) R. Singh et al. MATERIALS TECHNOLOGY
- Comparison of trabecular metal cups and titanium fiber-mesh cups in primary hip arthroplasty
- (2011) Thomas Baad-Hansen et al. Acta Orthopaedica
- Preparation and properties of biomedical porous titanium alloys by gelcasting
- (2011) Donghua Yang et al. Biomedical Materials
- Compression-compression fatigue of selective electron beam melted cellular titanium (Ti-6Al-4V)
- (2011) Nikolas W. Hrabe et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- An innovative multi-component variate that reveals hierarchy and evolution of structural damage in a solid: application to acrylic bone cement
- (2011) Gang Qi et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Novel production method of porous surface Ti samples for biomedical application
- (2011) Luana Marotta Reis de Vasconcellos et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Fatigue behavior of TiNi foams processed by the magnesium space holder technique
- (2011) G. İpek Nakaş et al. Journal of the Mechanical Behavior of Biomedical Materials
- Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee replacement implants fabricated by electron beam melting
- (2011) L.E. Murr et al. Journal of the Mechanical Behavior of Biomedical Materials
- Titanium–10wt% 45S5 Bioglass nanocomposite for biomedical applications
- (2011) K. Jurczyk et al. MATERIALS CHEMISTRY AND PHYSICS
- A method for manufacturing cellular metals with open- and close-type porosities
- (2011) M. Covaciu et al. MATERIALS LETTERS
- Bulk and porous metastable beta Ti–Nb–Zr(Ta) alloys for biomedical applications
- (2011) V. Brailovski et al. Materials Science & Engineering C-Materials for Biological Applications
- Zr–Ti–Nb porous alloys for biomedical application
- (2011) A.E. Aguilar Maya et al. Materials Science & Engineering C-Materials for Biological Applications
- Influence of cell aspect ratio on architecture and compressive strength of titanium foams
- (2011) Nihan Tuncer et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characterization of Ti–6Al–4V alloy foams synthesized by space holder technique
- (2011) Ziya Esen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures
- (2011) S. Van Bael et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
- (2011) L.C. Zhang et al. SCRIPTA MATERIALIA
- Metal Foaming Investigated by X-ray Radioscopy
- (2011) Francisco Garcia-Moreno et al. Metals
- A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications
- (2011) Jayanthi Parthasarathy et al. Journal of Manufacturing Processes
- Hierarchically structured titanium foams for tissue scaffold applications
- (2010) R. Singh et al. Acta Biomaterialia
- Bioactive Ti metal analogous to human cancellous bone: Fabrication by selective laser melting and chemical treatments
- (2010) Deepak K. Pattanayak et al. Acta Biomaterialia
- Novel NiZr-based porous biomaterials: Synthesis and in vitro testing
- (2010) Khachatur Manukyan et al. CHEMICAL ENGINEERING JOURNAL
- A Monoblock Porous Tantalum Acetabular Cup Has No Osteolysis on CT at 10 Years
- (2010) Todd C. Moen et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- A two-scale model for predicting elastic properties of porous titanium formed with space-holders
- (2010) Wenjuan Niu et al. COMPUTATIONAL MATERIALS SCIENCE
- Midterm Results of a Porous Tantalum Monoblock Tibia Component
- (2010) Anthony S. Unger et al. JOURNAL OF ARTHROPLASTY
- Osteoinduction of porous titanium: A comparative study between acid-alkali and chemical-thermal treatments
- (2010) Chaoyong Zhao et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Processing of a porous titanium alloy from elemental powders using a solid state isothermal foaming technique
- (2010) Aris W. Nugroho et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Characterization of cellular solids in Ti6Al4V for orthopaedic implant applications: Trabecular titanium
- (2010) E. Marin et al. Journal of the Mechanical Behavior of Biomedical Materials
- Medical design: Direct metal laser sintering of Ti–6Al–4V
- (2010) Liciane Sabadin Bertol et al. MATERIALS & DESIGN
- Effect of pore size on the tensile behavior of open-cell Ti foams: Experimental results
- (2010) Mohamed Shehata Aly MATERIALS LETTERS
- Rotating bending fatigue response of laser processed porous NiTi alloy
- (2010) Sheldon Bernard et al. Materials Science & Engineering C-Materials for Biological Applications
- Titanium foams produced by solid-state replication of NaCl powders
- (2010) Bing Ye et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fracture toughness of titanium foams for medical applications
- (2010) Sadaf Kashef et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Preparation of porous Ti35Nb alloy and its mechanical properties under monotonic and cyclic loading
- (2010) Jian-guo LIN et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Advances in Porous Biomaterials for Dental and Orthopaedic Applications
- (2010) Meenakshi Mour et al. Materials
- Characterization of the deformation behavior of intermediate porosity interconnected Ti foams using micro-computed tomography and direct finite element modeling
- (2009) R. Singh et al. Acta Biomaterialia
- Effect of process control agent on the porous structure and mechanical properties of a biomedical Ti–Sn–Nb alloy produced by powder metallurgy
- (2009) A. Nouri et al. Acta Biomaterialia
- Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants
- (2009) Amit Bandyopadhyay et al. Acta Biomaterialia
- Can Porous Tantalum Be Used to Achieve Ankle and Subtalar Arthrodesis?: A Pilot Study
- (2009) Arno Frigg et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Do Tantalum and Titanium Cups Show Similar Results in Revision Hip Arthroplasty?
- (2009) S. Mehdi Jafari et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Clinical and radiological evaluation of Trabecular Metal and the Smith–Robinson technique in anterior cervical fusion for degenerative disease: a prospective, randomized, controlled study with 2-year follow-up
- (2009) Håkan Löfgren et al. EUROPEAN SPINE JOURNAL
- Powder sintering of porous Ti–15Mo alloy from TiH2 and Mo powders
- (2009) Yong-Hua Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Bone Remodeling Around Porous Metal Cementless Acetabular Components
- (2009) R. Michael Meneghini et al. JOURNAL OF ARTHROPLASTY
- Selective laser melting: A unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications. II. Randomized structures
- (2009) Lewis Mullen et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Fixation of a Trabecular Metal Knee Arthroplasty Component
- (2009) MJ Dunbar et al. JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME
- Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
- (2009) Jayanthi Parthasarathy et al. Journal of the Mechanical Behavior of Biomedical Materials
- Anterior Cervical Fusion With Tantalum Implant
- (2009) Mariano Fernández-Fairen et al. SPINE
- Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
- (2008) Peter Heinl et al. Acta Biomaterialia
- Porous NiTi for bone implants: A review
- (2008) A. Bansiddhi et al. Acta Biomaterialia
- Characterization of the structure and permeability of titanium foams for spinal fusion devices
- (2008) R SINGH et al. Acta Biomaterialia
- Selective Electron Beam Melting of Cellular Titanium: Mechanical Properties
- (2008) P. Heinl et al. ADVANCED ENGINEERING MATERIALS
- A New Era in Porous Metals: Applications in Orthopaedics
- (2008) B. Levine ADVANCED ENGINEERING MATERIALS
- Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants
- (2008) T. Traini et al. DENTAL MATERIALS
- Multicentre use of a porous tantalum monoblock acetabular component
- (2008) Th. A. Xenakis et al. INTERNATIONAL ORTHOPAEDICS
- Eight- to Ten-Year Clinical and Radiographic Outcome of a Porous Tantalum Monoblock Acetabular Component
- (2008) George Macheras et al. JOURNAL OF ARTHROPLASTY
- Porous tantalum in hip and knee reconstructive surgery
- (2008) Nilesh Patil et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Use of Porous Tantalum Metaphyseal Cones for Severe Tibial Bone Loss During Revision Total Knee Replacement
- (2008) R Michael Meneghini et al. JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME
- Porous biocompatible implants and tissue scaffolds synthesized by selective laser sintering from Ti and NiTi
- (2008) I. V. Shishkovsky et al. JOURNAL OF MATERIALS CHEMISTRY
- Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications
- (2008) L.E. Murr et al. Journal of the Mechanical Behavior of Biomedical Materials
- Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
- (2008) M. Geetha et al. PROGRESS IN MATERIALS SCIENCE
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now