Large-scale spanwise periodicity in a turbulent boundary layer induced by highly ordered and directional surface roughness

The effect of converging-diverging riblet-type surface roughness (riblets arranged in a 'herringbone' pattern) are investigated experimentally in a zero pressure gradient turbulent boundary layer. For this initial parametric investigation three different parameters of the surface roughness are analysed in detail; the converging-diverging riblet yaw angle alpha, the streamwise fetch or development length over the rough surface F-x and the viscous-scaled riblet height h(+). It is observed that this highly directional surface roughness pattern induces a large-scale spanwise periodicity onto the boundary layer, resulting in a pronounced spanwise modification of the boundary layer thickness. Hot-wire measurements reveal that above the diverging region, the local mean velocity increases while the turbulent intensity decreases, resulting in a thinner overall boundary layer thickness in these locations. The opposite situation occurs over the converging region, where the local mean velocity is decreased and the turbulent intensity increases, producing a locally thicker boundary layer. Increasing the converging-diverging angle or the viscous-scaled riblet height results in stronger spanwise perturbations. For the strongest convergent-divergent angle, the spanwise variation of the boundary layer thickness between the diverging and converging region is almost a factor of two. Such a large variation is remarkable considering that the riblet height is only 1% of the unperturbed boundary layer thickness. Increasing the fetch seems to cause the perturbations to grow further from the surface, while the overall strength of the induced high and low speed regions remain relatively unaltered. Further analysis of the pre-multiplied energy spectra suggests that the surface roughness has modified or redistributed the largest scale energetic structures. (c) 2013 Elsevier Inc. All rights reserved.