Evaluation of modified jatropha-based oil with hexagonal boron nitride particle as a biolubricant in orthogonal cutting process

Tribological behaviour of modified jatropha oil by mixing hexagonal boron nitride nanoparticles as a bio-based lubricant for machining processes

(2017) N. Talib et al.   JOURNAL OF CLEANER PRODUCTION

Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review

(2016) Anuj Kumar Sharma et al.   JOURNAL OF CLEANER PRODUCTION

Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils

(2016) Yaogang Wang et al.   JOURNAL OF CLEANER PRODUCTION

Metalworking fluids—Mechanisms and performance

(2015) E. Brinksmeier et al.   CIRP ANNALS-MANUFACTURING TECHNOLOGY

Performance evaluation of nanofluid MQL with vegetable-based oil and ester oil as base fluids in turning

(2015) Yu Su et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

On the feasibility of a reduction in cutting fluid consumption via spray of biodegradable vegetable oil with compressed air in machining Inconel 706

(2015) Ahmadreza Hosseini Tazehkandi et al.   JOURNAL OF CLEANER PRODUCTION

Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil

(2015) Yanbin Zhang et al.   JOURNAL OF CLEANER PRODUCTION

Chemical composition and in vitro evaluation of the cytotoxic and antioxidant activities of supercritical carbon dioxide extracts of pitaya (dragon fruit) peel

(2014) Hui Luo et al.   Chemistry Central Journal

Experimental determination of the tool–chip thermal contact conductance in machining process

(2014) Vahid Norouzifard et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Tribological studies of potential vegetable oil-based lubricants containing environmentally friendly viscosity modifiers

(2013) L.A. Quinchia et al.   TRIBOLOGY INTERNATIONAL

The Size Effect of Boron Nitride Particles on the Tribological Performance of Biolubricants for Energy Conservation and Sustainability

(2013) Carlton J. Reeves et al.   TRIBOLOGY LETTERS

Tribological behaviors of novel tri(hydroxymethyl)propane esters containing boron and nitrogen as lubricant additives in rapeseed oil

(2012) Xianbing Ji et al.   INDUSTRIAL LUBRICATION AND TRIBOLOGY

Fabrication and performance of porous metal-bonded CBN grinding wheels using alumina bubble particles as pore-forming agents

(2012) W. F. Ding et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Cutting AISI 1045 steel at very high speeds

(2012) G.G. Ye et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

An innovative approach to monitor the chip formation effect on tool state using acoustic emission in turning

(2012) Bhuiyan M.S.H. et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Effects of blended vegetable-based cutting fluids with extreme pressure on tool wear and force components in turning of Al 7075-T6

(2012) Emel Kuram et al.   Lubrication Science

Friction torque of thrust ball bearings lubricated with wind turbine gear oils

(2012) Carlos M.C.G. Fernandes et al.   TRIBOLOGY INTERNATIONAL

Application of vegetable oil-based metalworking fluids in machining ferrous metals—A review

(2011) S.A. Lawal et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Investigation of tool wear and surface integrity on MQL machining of Ti-6AL-4V using biodegradable oil

(2011) E A Rahim et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

Hybrid modelling of sliding–sticking zones at the tool–chip interface under dry machining and tool wear analysis

(2011) S. Bahi et al.   WEAR

Vegetable oils as a potential cutting fluid—An evolution

(2010) Y.M. Shashidhara et al.   TRIBOLOGY INTERNATIONAL

A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys

(2010) E.A. Rahim et al.   TRIBOLOGY INTERNATIONAL

A comparative study on the tribological behaviour of hexagonal boron nitride (h-BN) as lubricating micro-particles—An additive in porous sliding bearings for a car clutch

(2009) Z. Pawlak et al.   WEAR

An experimental investigation on contact length during minimum quantity lubrication (MQL) machining

(2007) B. Tasdelen et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY