Effect of oxidation time on microstructure and mechanical properties of Cf/SiC–Al composites after high-temperature oxidation

Effect of TM (TM=Fe, Mn, Cr) alloying on the high temperature properties and strengthening mechanism of Cf/Al composites

(2021) Zhongguo Xu et al.   COMPOSITES PART B-ENGINEERING

Effect of oxidization of 3D-SiC preforms on the interfacial structure and mechanical properties of co-continuous SiC/Al composites

(2021) Jingbo Zhu et al.   CERAMICS INTERNATIONAL

Effects of solid solution treatment on microstructure and mechanical properties of SiCp/2024 Al composite: A comparison with 2024 Al alloy

(2021) G.F. Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and ablation behaviour of a Cf/SiC-Al composite prepared by infiltrating Al alloy into Cf/SiC

(2021) Jinhao Jia et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Outstanding strengthening behavior and dynamic mechanical properties of in-situ Al–Al3Ni composites by Cu addition

(2020) Jeong Tae Kim et al.   COMPOSITES PART B-ENGINEERING

Compressive strength and wear properties of SiC/Al6061 composites reinforced with high contents of SiC fabricated by pressure-assisted infiltration

(2020) Khadijeh Maleki et al.   CERAMICS INTERNATIONAL

A multiscale modeling for predicting the thermal expansion behaviors of 3D C/SiC composites considering porosity and fiber volume fraction

(2020) Zheng Sun et al.   CERAMICS INTERNATIONAL

Microstructures and oxidation behaviors of Al-modified and Al2O3-modified SiC coatings on carbon/carbon composites via pack cementation

(2020) Jinguo Huang et al.   CERAMICS INTERNATIONAL

Compressive strength and damage mechanisms of 3D needle-punched C /SiC–Al composites

(2020) Liping Xue et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and mechanical properties of C /SiC–Al composites fabricated by PIP and vacuum pressure infiltration processes

(2019) Jiahao Liao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A great improvement of tensile properties of Cf/AZ91D composite through grafting CNTs onto the surface of the carbon fibers

(2019) Jiming Zhou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High-performance Cf/SiC composites with a novel needle-punched carbon fiber fabric fabricated by PIP process

(2019) Binbin Li et al.   Materials Research Express

Compressive strength and damage mechanisms of 2D-C/SiC composites at high temperatures

(2018) Lihua Li et al.   CERAMICS INTERNATIONAL

Microstructure and properties of plain-weave carbon fabric reinforced ceramic composites containing Cu-Si alloy

(2018) Yang Li et al.   COMPOSITES PART B-ENGINEERING

Structural and thermal characterization of multiwall carbon nanotubes (MWCNTs) / aluminum (Al) nanocomposites

(2018) S. Saadallah et al.   COMPOSITES PART B-ENGINEERING

Microstructural tailoring and its influence on oxidation resistance of carbon fiber-reinforced C-SiC matrix composites

(2018) Jixiang Dai et al.   CERAMICS INTERNATIONAL

Mechanical and microstructure properties of deformed Al–Al2O3 nanocomposite at elevated temperature

(2017) H.R. Ezatpour et al.   JOURNAL OF MATERIALS RESEARCH

Preparation and characterization of ZrB 2 and TaC containing C f /SiC composites via Polymer-Infiltration-Pyrolysis process

(2017) Franziska Uhlmann et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Mechanical and thermal properties of nanocarbon-reinforced aluminum matrix composites at elevated temperatures

(2016) S.E. Shin et al.   COMPOSITES PART B-ENGINEERING

Analysis of oxidation behavior of vapor-grown carbon fiber (VGCF) under dry air

(2016) Kazumasa Nakamura et al.   MATERIALS LETTERS

The thickness of native oxides on aluminum alloys and single crystals

(2015) J. Evertsson et al.   APPLIED SURFACE SCIENCE

Effect of fiber orientation on mechanical properties of 2D-C f /Al composites by liquid–solid extrusion following Vacuum infiltration technique

(2015) L.H. Qi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical Property of M40Jf/5A06Al Composite at Elevated Temperatures

(2015) Da-Guang Li et al.   Acta Metallurgica Sinica-English Letters

Cluster-assisted nucleation of silicon phase in hypoeutectic Al–Si alloy with further inoculation

(2014) Yong Zhang et al.   ACTA MATERIALIA

Compressive behavior of C/SiC composites over a wide range of strain rates and temperatures

(2013) Tao Suo et al.   CARBON

Effect of heat treatment on microstructure and interface of SiC particle reinforced 2124 Al matrix composite

(2013) Durbadal Mandal et al.   MATERIALS CHARACTERIZATION

Effect of specific pressure on fabrication of 2D-Cf/Al composite by vacuum and pressure infiltration

(2013) Yu-qin MA et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Raman spectroscopy studies of the high-temperature evolution of the free carbon phase in polycarbosilane derived SiC ceramics

(2010) Ma Yan et al.   CERAMICS INTERNATIONAL

Optimizing microstructures of hypereutectic Al–Si alloys with high Fe content via spray forming technique

(2010) L.G. Hou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Equicohesive temperature of the interface and matrix and its effect on the tensile plasticity of Al18B4O33 whiskers reinforced aluminum composite at elevated temperatures

(2009) W.D. Fei et al.   MATERIALS CHEMISTRY AND PHYSICS