Strengthening and fracture mechanisms of Fe–20Ni–14Cr–2Cu alumina-forming austenitic steel during creeping

High-temperature creep property deterioration of the alumina-forming austenitic steel: Effect of σ phase

(2022) Ziyun Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of precipitates evolutions in δ-ferrite and austenite matrix on mechanical properties of alumina-forming austenitic steel

(2022) Zhi Yuan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Creep behaviors of Fe-18Ni-12Cr based alumina-forming austenitic steels with ultralow carbon

(2021) Man Wang et al.   Journal of Materials Science

Synergistic alloying effects on nanoscale precipitation and mechanical properties of ultrahigh-strength steels strengthened by Ni3Ti, Mo-enriched, and Cr-rich co-precipitates

(2021) M.C. Niu et al.   ACTA MATERIALIA

Precipitation of Cu- and Nb-rich phases and its strengthening effect in 17Cr ferritic stainless steel during high-temperature creep process

(2021) Mingkun Jiang et al.   MATERIALS CHARACTERIZATION

Effect of Cu addition on microstructure and properties of Fe–20Ni–14Cr alumina-forming austenitic steel

(2021) Qiuzhi Gao et al.   INTERMETALLICS

Isothermal oxidation behavior of W‐free Co–Ni–Al‐based superalloy at high temperature

(2021) Qiuzhi Gao et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Co-strengthening of dislocations and precipitates in alumina-forming austenitic steel with cold rolling followed by aging

(2021) Qiuzhi Gao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of alloying elements on microstructure and mechanical properties of Co–Ni–Al–Ti superalloy

(2020) Qiuzhi Gao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and mechanical property evolution of an AFA alloy with simple composition design during ageing at 700 °C

(2020) Lingzhi Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure, mechanical properties and magnetic properties of FeCoNiCuTiSix high-entropy alloys

(2020) HuaiZhi Qu et al.   Science China-Technological Sciences

A Systematic Investigation of Precipitates in Matrix and at Grain Boundaries in an Alumina-Forming Austenitic Steel During Creep Testing at 700 °C

(2020) Hongyuan Wen et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

High-temperature oxidation behavior of modified 4Al alumina-forming austenitic steel: effect of cold rolling

(2020) Qiuzhi Gao et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

The effect of isothermal aging on creep behavior of modified 2.5Al alumina-forming austenitic steel

(2020) Jundong Jiang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of High Temperature Aging Treatment on the Microstructure and Impact Toughness of Z2CND18-12N Austenitic Stainless Steel

(2020) Hui Zhang et al.   Metals

Creep behavior of an alumina-forming austenitic steel with simple alloy design

(2020) Man Wang et al.   Materials Today Communications

Mechanisms for suppressing discontinuous precipitation and improving mechanical properties of NiAl-strengthened steels through nanoscale Cu partitioning

(2020) B.C. Zhou et al.   ACTA MATERIALIA

Microstructural evolution of Fe–20Cr–30Ni–2Nb–5Al AFA steel during creep at 760 °C

(2020) Andrew Peterson et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effect of isothermal aging on microstructure and mechanical behavior of modified 2.5Al alumina-forming austenitic steel

(2019) Yujiao Jiang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

EBSD analysis and mechanical properties of alumina-forming austenitic steel during hot deformation and annealing

(2019) Ziyun Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A novel ultra-high strength maraging steel with balanced ductility and creep resistance achieved by nanoscale β-NiAl and Laves phase precipitates

(2018) L. Sun et al.   ACTA MATERIALIA

Microstructure control to improve creep strength of alumina-forming austenitic heat-resistant steel by pre-strain

(2018) Min-Ho Jang et al.   MATERIALS CHARACTERIZATION

Preliminary creep testing of the alumina-forming austenitic stainless steel Fe-20Cr-30Ni-2Nb-5Al

(2018) Ian Baker et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ultrahigh stability and strong precipitation strengthening of nanosized NbC in alumina-forming austenitic stainless steels subjecting to long-term high-temperature exposure

(2018) W.X. Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evolution of precipitates in a Cu-containing alumina-forming austenitic steel after short-term mechanical tests

(2017) Bingbing Zhao et al.   MATERIALS CHARACTERIZATION

High temperature deformation of Laves phase precipitates in alumina-forming austenitic stainless steels

(2017) Bin Hu et al.   MATERIALS LETTERS

The role of phosphorus in precipitation behavior and its effect on the creep properties of alumina-forming austenitic heat-resistant steels

(2017) Min-Ho Jang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Oxidation performance of repaired aluminide coatings on austenitic steel substrates

(2017) Claire Boulesteix et al.   SURFACE & COATINGS TECHNOLOGY

Precipitates and Particles Coarsening of 9Cr–1.7W–0.4Mo–Co Ferritic Heat-Resistant Steel after Isothermal Aging

(2017) Qiuzhi Gao et al.   Scientific Reports

Precipitation kinetics during aging of an alumina-forming austenitic stainless steel

(2016) Geneva Trotter et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evolution of microstructure and tensile properties of Fe–18Ni–12Cr based AFA steel during aging at 700 °C

(2016) Man Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Precipitation evolution and creep strength modelling of 25Cr20NiNbN austenitic steel

(2015) Stojan Vujic et al.   MATERIALS AT HIGH TEMPERATURES

Precipitate characteristics and their effects on the high-temperature creep resistance of alumina-forming austenitic stainless steels

(2015) D.Q. Zhou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Formation of L12-ordered precipitation in an alumina-forming austenitic stainless steel via Cu addition and its contribution to creep/rupture resistance

(2015) Bingbing Zhao et al.   SCRIPTA MATERIALIA

Discussing the precipitation behavior of σ phase using diffusion equation and thermodynamic simulation in dissimilar stainless steels

(2010) Chih-Chun Hsieh et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Aging effects on the mechanical properties of alumina-forming austenitic stainless steels

(2009) H. Bei et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Alloying effects on creep and oxidation resistance of austenitic stainless steel alloys employing intermetallic precipitates

(2008) Y. Yamamoto et al.   INTERMETALLICS