High thermal stability of nanocrystalline FeNi2CoMo0.2V0.5 high-entropy alloy by twin boundary and sluggish diffusion

Critical microstructures and defects in heterostructured materials and their effects on mechanical properties

(2020) Yanfang Liu et al.   ACTA MATERIALIA

Nanostructured high-entropy materials

(2020) Michel J.R. Haché et al.   JOURNAL OF MATERIALS RESEARCH

Effective Surface Nano-Crystallization of Ni2FeCoMo0.5V0.2 Medium Entropy Alloy by Rotationally Accelerated Shot Peening (RASP)

(2020) Ningning Liang et al.   Entropy

Tailoring grain growth and solid solution strengthening of single-phase CrCoNi medium-entropy alloys by solute selection

(2020) G.W. Hu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Static recrystallization and grain growth behaviour of Al0.3CoCrFeNi high entropy alloy

(2019) Murugesan Annasamy et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Annealing Temperature on Microstructure and Mechanical Properties of a Severe Cold-Rolled FeCoCrNiMn High-Entropy Alloy

(2019) Ziyong Li et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

A promising CoFeNi2V0.5Mo0.2 high entropy alloy with exceptional ductility

(2019) L. Jiang et al.   SCRIPTA MATERIALIA

Annealing-induced hardening in ultrafine-grained and nanocrystalline materials

(2019) Jenő Gubicza   ADVANCED ENGINEERING MATERIALS

The enhanced static recrystallization kinetics of a non-equiatomic high entropy alloy through the reverse transformation of strain induced martensite

(2019) M.H. Mohammad Ebrahimi et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Thermal stability and coarsening of coherent particles in a precipitation-hardened (NiCoFeCr) 94 Ti 2 Al 4 high-entropy alloy

(2018) Y.Y. Zhao et al.   ACTA MATERIALIA

Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties

(2018) B. Schuh et al.   ACTA MATERIALIA

A multiscale architectured CuCrZr alloy with high strength, electrical conductivity and thermal stability

(2018) Ningning Liang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Influence of microstructure on thermal stability of ultrafine-grained Cu processed by equal channel angular pressing

(2018) Ningning Liang et al.   JOURNAL OF MATERIALS SCIENCE

Effect of Ti on phase stability and strengthening mechanisms of a nanocrystalline CoCrFeMnNi high-entropy alloy

(2018) Hamed Shahmir et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of Annealing on Microstructure and Mechanical Properties of Refractory CoCrMoNbTi0.4 High-Entropy Alloy

(2018) Mina Zhang et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Thermal analysis of electrodeposited nano-grained Ni-Mo alloys

(2018) J. Hu et al.   SCRIPTA MATERIALIA

Annealing-induced hardening in high-pressure torsion processed CoCrNi medium entropy alloy

(2018) S. Praveen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Activation energy for plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: A high temperature nanoindentation study

(2018) Dong-Hyun Lee et al.   SCRIPTA MATERIALIA

Tailoring mechanical properties of a CoCrNi medium-entropy alloy by controlling nanotwin-HCP lamellae and annealing twins

(2018) H.W. Deng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys

(2018) Zezhou Li et al.   PROGRESS IN MATERIALS SCIENCE

Annealing-induced abnormal hardening in a cold rolled CrMnFeCoNi high entropy alloy

(2018) Ji Gu et al.   SCRIPTA MATERIALIA

Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing

(2017) Hamed Shahmir et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Deformation twinning behaviors of the low stacking fault energy high-entropy alloy: An in-situ TEM study

(2017) Jiabin Liu et al.   SCRIPTA MATERIALIA

Dual mechanisms of grain refinement in a FeCoCrNi high-entropy alloy processed by high-pressure torsion

(2017) Wenqian Wu et al.   Scientific Reports

Exceptional resistance to grain growth in nanocrystalline CoCrFeNi high entropy alloy at high homologous temperatures

(2016) S. Praveen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

High thermal stability of the amorphous structure of GexNbTaTiZr (x=0.5, 1) high-entropy alloys

(2016) Chun-Yang Cheng et al.   MATERIALS LETTERS

The significance of self-annealing at room temperature in high purity copper processed by high-pressure torsion

(2016) Yi Huang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of high pressure torsion on microstructures and properties of an Al 0.1 CoCrFeNi high-entropy alloy

(2016) P.F. Yu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion

(2016) Hamed Shahmir et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Stabilization of nanocrystalline alloys at high temperatures via utilizing high-entropy grain boundary complexions

(2016) Naixie Zhou et al.   SCRIPTA MATERIALIA

Stabilizing nanostructures in metals using grain and twin boundary architectures

(2016) K. Lu   Nature Reviews Materials

Stabilization of nanocrystalline alloys via grain boundary segregation: A diffuse interface model

(2015) Fadi Abdeljawad et al.   ACTA MATERIALIA

Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

(2015) B. Schuh et al.   ACTA MATERIALIA

Microstructural evolution of a CoCrFeMnNi high-entropy alloy after swaging and annealing

(2015) G. Laplanche et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Thermal behavior of copper processed by ECAP with and without back pressure

(2015) Ya Li Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A high strength and high electrical conductivity bulk CuCrZr alloy with nanotwins

(2015) L.X. Sun et al.   SCRIPTA MATERIALIA

Ultrastrong ductile and stable high-entropy alloys at small scales

(2015) Yu Zou et al.   Nature Communications

Annealing-induced Hardening in a Nanostructured Low-carbon Steel Prepared by Using Dynamic Plastic Deformation

(2014) L.X. Sun et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

(2013) F. Otto et al.   ACTA MATERIALIA

Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys

(2013) K.-Y. Tsai et al.   ACTA MATERIALIA

Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys

(2013) Z. Wu et al.   INTERMETALLICS

Mechanical, microstructural and electrical evolution of commercially pure copper processed by equal channel angular extrusion

(2013) O.F. Higuera-Cobos et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructures and properties of high-entropy alloys

(2013) Yong Zhang et al.   PROGRESS IN MATERIALS SCIENCE

Superior thermal stability of coherent twin boundaries in nanotwinned metals

(2012) X. Zhang et al.   SCRIPTA MATERIALIA

Grain refinement due to complex twin formation in rapid hot forging of magnesium alloy

(2012) Yunping Li et al.   SCRIPTA MATERIALIA

Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy

(2012) W.H. Liu et al.   SCRIPTA MATERIALIA

Recrystallization kinetics and microstructure evolution during annealing of a cold-rolled Fe–Mn–C alloy

(2011) Yaping Lü et al.   ACTA MATERIALIA

Strength and Ductility of Bi-Modal Cu

(2011) Yonghao Zhao et al.   ADVANCED ENGINEERING MATERIALS

Vacancies, twins, and the thermal stability of ultrafine-grained copper

(2011) C. Saldana et al.   APPLIED PHYSICS LETTERS

Thermal behavior of Ni (99.967% and 99.5% purity) deformed to an ultra-high strain by high pressure torsion

(2010) H.W. Zhang et al.   ACTA MATERIALIA

Refractory high-entropy alloys

(2010) O.N. Senkov et al.   INTERMETALLICS

Influence of grain size on the density of deformation twins in Cu–30%Zn alloy

(2010) Y. Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD

(2010) Marion Calcagnotto et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and mechanical properties of Cu and Cu–Zn alloys produced by equal channel angular pressing

(2010) Z.J. Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion

(2010) S. Scheriau et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Stabilizing nanostructured materials by coherent nanotwins and their grain boundary triple junction drag

(2009) C. Saldana et al.   APPLIED PHYSICS LETTERS

Response of aluminum processed by extrusion preceded ECAP to isochronal annealing

(2009) Aikaterini Zi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Low-Temperature Sensitization Behavior of Base, Heat-Affected Zone, and Weld Pool in AISI 304LN

(2009) Raghuvir Singh et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Stabilization of nanocrystalline grain sizes by solute additions

(2008) C. C. Koch et al.   JOURNAL OF MATERIALS SCIENCE

Using high-pressure torsion for metal processing: Fundamentals and applications

(2008) A ZHILYAEV et al.   PROGRESS IN MATERIALS SCIENCE

Observation of Atomic Diffusion at Twin-Modified Grain Boundaries in Copper

(2008) K.-C. Chen et al.   SCIENCE