Journal
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
Volume 46A, Issue 11, Pages 5182-5200Publisher
SPRINGER
DOI: 10.1007/s11661-015-3116-9
Keywords
-
Funding
- Council of Scientific and Industrial Research (CSIR)
- Steel Development Fund (Government of India)
- Tata Steel Ltd.
Ask authors/readers for more resources
Interstitial-free (IF) and dual-phase (DP) steel sheets of 1-mm thickness were joined by friction stir spot welding with a convex shoulder tool. Two different combinations were used; one with IF as top sheet (IF/DP) and another with DP as top sheet (DP/IF). Material intermixing between the overlapping sheets takes place within the stirred zone. The truncated sheet interface curls upward into the top sheet, more so in case of IF/DP, due to lower resistance offered by the top (IF) sheet to the upward migrating bottom (DP) sheet material. Material from the IF steel contains ferrite phases, while that from the DP steel contains acicular ferrite and lath martensite. Under quasi-static loading, the crack passes along the dissimilar interface and into the top sheet thickness, resulting in pull-out failure. Under cyclic loading, the failure is brought about by the initiation of kinked fatigue cracks and their subsequent propagation through the top and bottom sheet thickness. The dominant fatigue crack moves through the reduced top sheet thickness. The mechanical performance of DP/IF is better than IF/DP owing to higher strength of the stirred zone. The mechanical performances of the dissimilar joints are intermediate to that of the similar material joints. (C) The Minerals, Metals & Materials Society and ASM International 2015
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available